Used Abi Wdf271X for sale (1,231)

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 Ljdpoh D Ilzjfx Afaohf -Dimensions: 310/165/H185 mm -Weight: 9.5 kg

Condition: ready for operation (used), Year of construction: 2008, A remote-controlled heavy-duty vehicle is available. Length: 14m, width: 2.4m, payload: 20t, loading length: 11.5m, heavy-duty lifting tables: 2, drive: Lombardini diesel. Documentation available. An on-site inspection is possible. Lsdpfx Afeyt N Dweaehf

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Base carrier : Sennebogen SR 35 T Aux Winch Vibrator MRZV 24VV Pre drilling rotary available Lhedpfjh Tyylex Afasf Good working condition!

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Lhjdpex Uyzqsfx Afaof 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Toppy Octabin Mobile Pile Turner This machine is like new, fully functional, and ready to use. Manufactured in 2011. This machine is designed for turning pallets, boxes, big bags, etc. It is also ideal for emptying containers, transferring goods, etc. Technical specifications: Maximum pallet size: 1000 x 1200 mm High stack height Lhsdpey Ehidofx Afaef Load capacity: 400 kg Device weight: 950 kg Battery charger included. Controlled from a control panel, fast operation, hydraulic drive. Independent control of each fork, smooth rotation adjustment. The machine can also be used as a pallet loading trolley. Quiet operation. Compact design, space-saving.

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Lodpfx Afjy Ah Rcjajhf Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, COMPACT serisi sabit Beton santralleri, pratik ve etkili çözümlerle ihtiyaç duyulan her seviyenin memnuniyetini sağlar. Sabit Beton santralleri, homojen beton karışımının yüksek kapasiteli üretimine kolay ve verimli bir şekilde ulaşabilir. kompakt Serisi kolay işletim sistemine ve en düşük yatırım maliyetlerine sahiptir. Buna ek olarak, tesis kurumsal kaynakların doğru bir şekilde kullanılmasını sağlar, böylece zaman tasarrufu elde etmek daha fazla kazanca dönüşecektir. TEKNİK ÖZELLİKLER: Modeli: Kompakt 60 Üretim kapasitesi: 60 m3 Mikser tipi: Twinshaft Mikser 1 m3 Çimento tartı: 600 kg Katkı maddeleri tartı:30 kg Su tartı: 250 kg Çimento silosu isteğe bağlıdır. Kompakt-60 oluşur: * Agrega Depolama Bunkeri * Agrega Tartı Haznesi * Agrega Tartı Konveyörü * Agrega Transfer Konveyörü * Twinshaft Karıştırıcı Lodpfxey A Eldo Afaehf * Karıştırıcı Şasi, Yürüyüş Platformları, Merdiven * Su Tartı Haznesi * Çimento Tartı Haznesi * Katkı Tartı Haznesi * Hava Kompresörü * Çimento Vidalı Konveyör * Cıvatalı Çimento Silosu * Üst filtre, Emniyet valfi ve aksesuarları * Klima ile kontrol kabini * PC ve Otomasyon Sistemi * Kontrol ve güç paneli * Tüm ürünlerimiz özenle yapılır ve 1 yıl garanti kapsamındadır! * Kurulum ve operatör Eğitimi ücretsiz DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAYIN!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. Ledpfjy A Eipox Afaohf COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 120 Production capacity: 120 m3 Mixer type: Twinshaft – 3 m3 Aggragate bunker: 4x20 m3 Cement weighing: 1750 kg Additives weighing: 40 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 120 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: limited functionality, We offer this used Cabinplant 20-head weigher. Overall dimensions: 2900x1550x2000mm. Price negotiable, complete unit. Lhodpfoytcbiex Afaef If you have any questions or need further information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, Mabi 4QS + 4H Quadro beading machine and fastening device Mabi 3000E segment shear Mabi jacket bending machine Mabi punching machine Lhedpfoyz Ad Uox Afajf Mabi 40 cap cutting machine + Mabi 4K cap punching machine Mabi flanging machine

Condition: like new (used), Chanber size: 280x180x500mm upper Lhodpfjd Sm Dijx Afasf 280x130x450mm lower Max temperature: 700 C °

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 700 h, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, coolant supply: 80 bar, rapid traverse Z-axis: 120 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rotational speed (max.): 25,000 rpm, rotational speed (min.): 1 rpm, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors Lsdpfsu Im Enex Afajhf The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Lsdoyw R Ndopfx Afaohf Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl - Central coolant system

Condition: used, functionality: fully functional, input voltage: 380 V, cutting height (max.): 600 mm, cutting width (max.): 550 mm, control type: manual, actuation type: electric, total height: 2,600 mm, total length: 18,000 mm, total width: 3,500 mm, overall weight: 4,184 kg, Equipment: documentation/manual, motor brake, For sale: JAROMA DRCC-110 vertical wide-band sawmill. This is a saw with a feed carriage, log manipulation system, longitudinal feeder, and log infeed device. Designed for longitudinal cutting of logs into boards and squared timber. Saw wheel diameter: 1100 mm. Cutting speed: 38 m/s. Carriage working speed: 1–40 m/min. Bandsaw width: 130 mm. Very well-suited for cutting curved logs. Includes a cross-feed conveyor for the log storage area. Lsdpoyqx Uyefx Afaehf

Condition: used, functionality: fully functional, overall weight: 1,750 kg, Automatic band saw Brand: SABI Model: EB 320 A Type: Automatic straight-cut Weight: 1750 kg Cutting capacity: 320 mm / 320x320 mm / round 320 mm Saw blade dimensions: 4570x32x1.1 mm Variable cutting speed: 16-100 m/min. Automatic feed length: 500-4500 mm Ljdpfeyc Saaex Afajhf UNITRONICS control system newly installed 2 years ago.

Condition: used, Year of construction: 2003, cutting height (max.): 700 mm, total length: 2,180 mm, total width: 900 mm, total height: 1,525 mm, overall weight: 1,100 kg, working height: 700 mm, Double column bandsaw Lhedpfxsx Tg Uns Afaef Brand: SABI Model: PBS 320-450 Year: 2003 The Sabi PBS 320 bandsaw is a semi-automatic double column machine designed for metal cutting. Below are its technical features: Cutting capacity at 90°: Round: up to 320 mm diameter. Rectangular: up to 320 x 285 mm. Round: up to 280 mm diameter. Bandsaw blade dimensions: Length: 4570 mm. Width: 34 mm. Thickness: 1.1 mm. Cutting speed: adjustable between 15 and 105 m/min. Main motor power: 4 kW. Working height: 700 mm. Jaw height: 175 mm. Machine dimensions: Length: 2180 mm. Width: 900 mm. Height: 1525 mm. Weight: approximately 1100 kg. These specifications make the Sabi PBS 320/450 a robust and versatile choice for cutting operations in workshops and industrial environments.

Condition: not inspected (used), functionality: unexamined, total length: 730 mm, total width: 700 mm, total height: 1,200 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 04.05.26 and 07.05.26. Workshop drawer cabinet with the following contents: Twist drills in various sizes Vice, jaw width: 70 mm Ledpfsyr Ir Dox Afashf Reamers Clamping systems MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 730 x 700 x 1,200 mm Weight: 300 kg External reference: 51

Condition: not inspected (used), functionality: unexamined, total length: 700 mm, total width: 280 mm, total height: 1,950 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Lhodpfxoyr Irks Afajf Contents: Screws Nuts Cylindrical pins Washers Other workshop supplies MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 280 x 1,950 mm Weight: 300 kg External reference: Lot 16

Condition: not inspected (used), functionality: unexamined, total length: 700 mm, total width: 280 mm, total height: 1,950 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Contents: Screws Lsdjyr Ipvspfx Afaohf Nuts Additional workshop consumables MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 280 x 1,950 mm Weight: 300 kg External reference: Lot 15

Condition: used, Year of construction: 2001, Sabi PSR 360/600 bandsaw, semi-automatic Sabi bandsaw, all carbide (WIDIA) blade guides and seals and scrapers of the saw's lift/lower cylinder have been replaced. Cutting capacities: max diameter 320mm, rectangle 600 x 300mm, at 45º: 375 x 300mm. Cutting speed 15 to 105 m/min, main motor 2.2kW, total power 2.5kW, estimated weight 1900kg. Machine with rotation function, in very good condition. Lsdpfsxf Tvmex Afashf

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") Lhsdpfx Aewnm Ukjfaof - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. Lhodpfx Aox R R Igofajf The extruded material is formed into a parison, which is then molded into the final product.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Lhodpfx Aeyn H H Eofajf Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Auction of a workshop drawer cabinet with the following contents: Hand tools Open-ended spanners Screws Clamping devices Clamping plate with stand MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 750 x 550 x 860 mm Weight: 150 kg External reference: Pieper – Lot 48

Condition: not inspected (used), functionality: unexamined, total length: 1,800 mm, total width: 500 mm, total height: 2,000 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Bidding obliges the buyer to collect on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Auction of two workshop cabinets without contents! MACHINE DETAILS Ljdpfx Afoyn Hcyeaohf Dimensions & Weight Dimensions (L x W x H): 1,800 x 500 x 2,000 mm Weight: 300 kg External reference: Pieper - Lot 43

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Contents: 2 digital micrometers, one tip, micrometers, gauge templates. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 750 x 550 x 860 mm Weight: 200 kg External reference: Pieper - Lot 52 Lsdpfx Asyn Ekijfajhf