Used 4Chuck Tooling Tdg Solutions Pg 1000 for sale (45,950)

Condition: excellent (used), Year of construction: 2022, overall weight: 790 kg, chuck outer diameter: 1,000 mm, bolt circle diameter: 145 mm, total height: 140 mm, total width: 1,000 mm, total length: 1,000 mm, Metal cutting Tooling TDG Solutions - PGI 1000 Fedjzcnm Aepfx Ah Nsgc MACH-ID 9418 Make: TDG Solutions Type: PGI 1000 Year: 2022 Diameter: 1000mm 4 chuck: Yes Spindle bore:145mm Max. speed: 611Rpm Length: 1000mm Width: 1000mm Height: 140mm Weight: 790kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators screen your request Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Fedpfxsg Ainqo Ah Njgc Call or email us for consultation or if you have any questions, important! name company name and telephone number.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor length: 1000 mm, motor power: 45 + 2.2 kW. Hopper size: 1400 x 1000 mm, screen size available on request. Optional conveyor belt available. Fodskzg U Dspfx Ah Nogc Delivery upon request. For more information: RSS Recycling Shredders & Solutions Please include company name for inquiries or questions. IMPORTANT! Provide name, company, and telephone number.

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fgjdpfx Ahey T Ik Re Nsc

Year of construction: 2026, condition: new, functionality: fully functional, total length: 200 mm, total width: 500 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, machine/vehicle number: 2026, Air conditioner / proofer air conditioner NEW Lillnord Model: PG 1000 Powerful with sophisticated technology Fgodpsfvvnmofx Ah Nsc for all fermentation rooms up to 6 sqm Temperature range +20 to 45 ° C adjustable via thermostat Humidity range 60 to 95% R.H. adjustable via hygrostat Automatic water regulation long lifetime! thanks to the proven "Lillnord system" Dimensions: 500 x 200 x 1700 mm, WxDxH DGUV V3 tested Connection 400V, 6.5 kW, 16A-CEE plug NEW device with 12 months warranty Come to our large bakery machine warehouse!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 73 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y 43 m/min, Z 30 m/min Positioning accuracy ±0.005 mm Repeatability ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power 13 kW Fsdpfx Ahjzbqx So Nogc Speed 12000 rpm Spindle taper BT 40 Dual-arm tool changer: 30 tools Tool change time 5.2 sec Blum measuring probe TC52 Oil mist extraction system Coolant system Automatic central lubrication Vacuum sensor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, therefore the guide rails and the spindle are in very good condition. The machine can also be sold without the tool holders; in this case, the purchase price will be reduced by €1500.00 (new price approx. €4800.00). 73 tool holders 10 pcs. Weldon collet chuck, Ø 6 1 pcs. Weldon collet chuck, Ø 8 6 pcs. Weldon collet chuck, Ø10 4 pcs. Weldon collet chuck, Ø12 4 pcs. Weldon collet chuck, Ø16 3 pcs. Weldon collet chuck, Ø20 4 pcs. Long Weldon collet chuck, length 160, Ø8/10/12/16 18 pcs. OZ collet chuck DIN 6388, Ø 2-16 3 pcs. Threaded length compensation collet chuck 1 pcs. Intermediate sleeve for ISO 30 2 pcs. Milling cutter holder for screw-in milling cutters 2 pcs. Knife tool holder Ø 16 x 100 1 pcs. Knife tool holder Ø 22 x 160 1 pcs. Knife tool holder Ø 27 x 40 1 pcs. Knife tool holder Ø 40 x 160 2 pcs. Drill chuck holder B12 3 pcs. Albrecht drill chuck Ø 0-5 mm mounted on a taper 1 pcs. Short drill chuck Ø 0-8 mm 4 pcs. Short drill chuck Ø 1-13 mm 2 pcs. Precision collet chuck WNT Centro-P with collets Ø 6/8/10/12

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Fsdpfxex E Aywe Ah Njgc Siemens software operational.

Year of construction: 2020, condition: excellent (used), machine/vehicle number: 101262, Porta Solutions MULTICENTER 3 SPINDLE 3 Spindle Machining Center Fjdpfx Aovn T Dash Negc Mfd. 2020 SN: 101262 Control: Fanuc Panel i Chip Conveyor

Condition: good (used), Record Panda 1000 Flow Wrapper Fedpfsn R Suwex Ah Nogc All contact parts are stainless steel 250mm wide double Jaw feature Adjustable infeed max width 210mm Distance between flights 330mm Adjustable temperature jaws and crimpers Infeed length 1500mm Overall length 3500mm Variable speed 3 phase power In excellent condition Price € 5,950

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Fgsdpfx Asxbh Dqsh Njc Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,661 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, Equipment: chip conveyor, rotational speed infinitely variable, Vertical CNC machining center Fsdpjzcpgwofx Ah Negc Control: FANUC F0MF+ Accessories: Chip conveyor, hinged belt type, manufactured by Cromar CNC AutoDoor

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 400 mm, turning length: 510 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 36 m/min, total height: 1,921 mm, total length: 2,880 mm, total width: 1,711 mm, overall weight: 4,200 kg, Horizontal CNC turning center with Y-axis Control system: Fanuc F0TF+ Accessories: Chip conveyor, articulated belt type Combi500, manufactured by Cromar Pressure increase by 20 bar Tool magazine with 12 tool positions (BMT45P) Profluid bag filter LTA air filter, type AC 500R Air gun Hainbuch clamping device for main and counter spindle Fjdpfx Aezcpd Aeh Negc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 460 mm, turning length: 610 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 680 mm, spindle motor power: 18,500 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,095 mm, total length: 3,425 mm, total width: 1,920 mm, overall weight: 6,000 kg, Compact, linear-guided horizontal CNC turning center with 6 axes. Control system: Fanuc F0TF+ Fgodpfxezcpdcs Ah Nec Accessories: Chip conveyor, articulated belt type Combi500, manufactured by Cromar Main spindle chuck TopPlus Mini Axfix80, manufactured by Hainbuch Tool magazine with 12 tool positions (BMT55P)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Fedpsvf E Avefx Ah Nogc Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Fsdpfx Ahsza Etho Njgc Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking present Service / Usage history From the beginning, the system was used exclusively for processing aluminum and operated under a nitrogen atmosphere. Operation was reliable until decommissioning. As part of the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel chiller WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition according to images. Scope of delivery as shown in the pictures. A complete technical functional test under production conditions has not been carried out by us. Inspection and testing on site are possible and expressly desired after consultation. Loading can be organized after consultation. All information is provided to the best of our knowledge based on available documents, manufacturer's data, delivery note and nameplates. Deviations in technical data are possible. Errors, changes and prior sale are reserved.

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm Fgjdpfx Ahsza Eabe Noc - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces Fsdpjv E Sazefx Ah Negc manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, pressing force: 10 t, stroke length: 200 mm, operating speed: 260 mm/s, table width: 430 mm, table length: 440 mm, oil tank capacity: 46 l, overall weight: 800 kg, Equipment: documentation/manual, safety light barrier, J.A.M "Japan" made 10 ton hydraulic press for sale in excellent condition. Manufacturer JAM Fgedpfx Asvbfkreh Noc HYP-1000 model Model year 1995 Capacity 98KN (10t) Stroke length 200 mm Open height: 395 mm Table size 440 × 430 mm Punch hole φ32 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 19 mm/s Ram return speed: 219mm/s With light safety device Two-handed operation. Voltage 3 phase 200v 1.5kw Press body weight: 800kg Operating oil: 43 liters Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s Fodpfewcqc Uex Ah Nsgc With light safety device voltage 3-phase 200v 1,5kw press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170

Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Fsdpjwr Nlysfx Ah Njgc Net Weight 780kgs

Condition: good (used), We offer here a used workbench frame for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 1.000 mm Fsdpfxohvmmze Ah Nsgc Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 1.000 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 02x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 04x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data of the workbench frame: Manufacturer: Vogelsang Type: NS The scope of delivery includes: 02x workbench stand, new Material color: sendz. galvanized stand height: 900 mm stand depth: 1.000 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) Fsdpehm Sr Sjfx Ah Nsgc 04x workbench crossbars, used Material color: orange box profile: 110 x 50 mm clear width: 2.700 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We offer here a used workbench frame for sale. Fgedjhvmmdspfx Ah Njc Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 1.000 mm Technical data of the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used material color: sendz. galvanized stand height: 900 mm stand depth: 1.000 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: gray box profile: 110/140 x 50 mm clear width: 1.400 mm 08x safety pins, used execution: completely galvanized The pictures serve for the clarification of the material. The material color can deviate if necessary. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled Fgjdpfx Aoi Ewqyjh Njc ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.580 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.380 mm depth chipboard: 1.000 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm The pictures are for clarification of the material. The material color may differ if necessary. The chipboards can be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: like new (used), Year of construction: 2022, operating hours: 1,496 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, overall weight: 3,600 kg, power: 30 kW (40.79 HP), input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" with sub-spindle, driven tools and CNC FANUC i-PLUS iHMI complete with "TOP model FUSION" bar loader. Fjdpfx Ahotq Ayle Njgc