Used 44 Connectors for sale (4,838)

Condition: good (used), Connectors, plugs, sensor modules -Connectors: 3-pin, 44 pieces Bljdpfxjul H D Ds Amrsn Type: unfortunately without a designation -Price/Sale: complete -Dimensions: 41/39/H17 mm -Weight: 2.2 kg

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Blsdpoz Hq Rbjfx Amrjn Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: used, mileage: 958,238 km, power: 210 kW (285.52 HP), first registration: 12/2008, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 02/2027, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü (41+44+1+2 emergency seats), fully air-conditioned (Vehicle 727) Blsdpfx Aoz H Ecxemren First registration: 05.12.2008 958,238 km Engine: 6,374 ccm 210 kW / 286 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 02/2027 Permissible total weight: 19,000 kg, unladen weight: 11,960 kg, payload: 7,040 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 40/60%, rear approximately 40/40% Single door at the front, double door at the rear Driver's cab with door Ramp Fully automatic transmission Microphone 2 x electric and heated mirrors Fully air-conditioned Auxiliary heater + 2nd heater Stop brake 41+44+1+2 emergency seats Emergency exit 12-volt socket Chassis with slight rust 07.02.2024: ECAS height sensor, rear axle, right side, new 03.05.2024: Handbrake valve, new 24.07.2024: Front axle, brake disc + pads, new 13.05.2024: Steering knuckle, front axle, left side, new 24.07.2024: Crankshaft oil seal, transmission side, new 18.09.2024: Upper triangular arm, front axle, right side, new 07.10.2024: Lower triangular arm, front axle, right side, new 08.04.2025: Front axle, left side, 2 x triangular arms + bearings, new 22.04.2025: Pressure regulator/air dryer, new 13.05.2025: Belt tensioner + V-belt, air conditioning, new; air conditioning refilled, actuator, flap, roof, right side, new; wheel brake cylinder, rear axle, right side, new 09.07.2025: 2 x condenser fan, new 05.08.2025: Coolant reservoir, new; 2 x alternator, new 12.05.2026: Front axle, right side, air spring, new; rear axle, right side, shock absorber, new + shock absorber mount, new; Haldex valve, overhauled 03.08.2026: Brake caliper, front axle, left side, new Various signs of wear, consistent with age Last inspection on 05.08.2025 at 913,055 km, next inspection at 973,055 km Price: €5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Errors, typos, and prior sale are reserved.

Condition: used, Year of construction: 2006, - 528345 Safety device - 528110 CNC central lubrication system - 529166 Central extraction system - 529214 24-position tool changer - 528837 Work table with supports - 528716 16x TV vacuum cups, 145x145 mm - 528717 8x TV vacuum cups, 145x50 mm - 528719 6 positioning aids - 528200 2 cross lasers - 528715 Preparation for clamping cylinder - 528600 Clamping cylinder, Morbidelli Bsdpfx Ajz Algfjmrsln - 528121 Vacuum pump - 529207 Reinforced inverter - 528487 Drilling head speed controlled via machine inverter - 523025 Dongle for Xilog - 528409 Software preparation for teleservice - 529334 Clearance height 280 mm - 528525 PC control Storage location: Nattheim

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit Bodpfx Ajz Icw Asmrjln 2 feed pumps 1 flocculant pump 1 flocculant preparation tank 1 electrical control panel

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). Blodpoy Nfm Iofx Amren 6. The presses are “smart” and automatically adjust the clamping height to the conductor. 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below).

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below). Bjdoy I Dr Topfx Amroln

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Bsdpfx Amey D Rv Djrjln Storage location: Customer

Condition: good (used), Stephan Cutter, Model 44 Blodpfx Aoz D Dvxsmrsn 400 V

Condition: used, functionality: fully functional, Wohlenberg 44 FS 50 automatic three-knife trimmer. Complete with accessories. Blodpfsxdm Dbox Amron

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Bsdpow Rfkbefx Amroln Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: used, mileage: 436,340 km, power: 206 kW (280.08 HP), first registration: 12/2015, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: MAN Lions City UE A20, 45+44+1 + 2 emergency seats (Vehicle 80) First registration: December 16, 2015 436,340 km Engine: 10,518 ccm 205 kW / 279 hp Euro 6 MOT valid until 12/2026, TÜV (technical inspection) valid until 06/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,687 kg, payload: 7,813 kg Overall length: 11,980 mm x overall width: 2,500 mm x overall height: 2,985 mm Single door at the front, double door at the rear Driver's cabin with door Bodpfez E Abisx Amreln 45+44+1+2 emergency seats Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system with ticket machine Tires 275/70R22.5, front approx. 60%, rear approx. 30/40% March 26, 2024: New oil filler tube, December 9, 2024: Upper axle strut on the right rear axle new, left engine mount new, serpentine belt for the alternator new, December 9, 2024: Brake chamber on the right front axle new, brake caliper on the left front axle overhauled, brake caliper on the left rear axle new, December 10, 2024: Pressure relief valve next to the gearbox new, tie rod end new, June 3, 2025: Left engine mount new, December 15, 2025: Left engine mount new. Various signs of wear and tear, commensurate with the age of the vehicle. Good overall condition. Last inspection at 428,444 km on March 3, 2026, next inspection at 498,464 km. Price: € 40,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter with stops. Bedpfx Amszvn Hborsln

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Bedpozizpcsfx Amrsln Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2015, Extraction unit HURRICAN JSS-3-6-44-800, year of manufacture 2007/2015. Current air volume flow: 87,900 m3/h. Filter area: 796 m2. Maximum surface load: 130 m3/m2/h. Reserve capacity: 15,800 m3/h. Length approx. 8,950 mm + return air. Width: 2,950 mm. Height: 9,720 mm. Dust type: wood chips/dust. Bodpfov Dfr Uox Amreln

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm Bljdpfx Ajw D Aq Tsmrsn revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Bodpeixz A Ejfx Amreln Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Bjdezdrufepfx Amrjln

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Bodpfxjzw Axns Amreln Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: used, Year of construction: 2009, Capacity: 10.000 bph Format parts: 0,75 L Bordeaux 310 and 330 and 1,0 L Schlegel Bedpfxez Iawte Amreln

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. Bedpfx Aezfyu Ajmreln POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, mileage: 567,000 km, power: 309 kW (420.12 HP), first registration: 10/2007, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, Year of construction: 2007, Equipment: ABS, crane, Renault Kerax 420 DCI Tipper 5,35 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 567 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH TIPPER: 535 x 245 x 80 cm (L x W x H) CAPACITY: 14 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 175/247/135 cm TIRE SIZE: 13R22,5 SPRING SUSPENSION ON BOTH AXLE CRANE: PALFINGER PK 44 002 + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR Bledpfx Ajzrkm Asmren COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 4521

Condition: like new (used), functionality: fully functional, HBS 840-44-E Bark Shredder totally renovated and as good as new Blodpei E Tkwofx Amron

Condition: used, mileage: 839,600 km, power: 210 kW (285.52 HP), first registration: 11/2009, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: air conditioning, parking heater, * Mercedes-Benz Ciatro O530K * Transmission recently renewed * 30+44 seats * 10.6m length * EVOBUS * LAWO destination display * Wheelchair ramp * Air conditioning * Auxiliary heater * Tachograph * Euro 5 Bsdpsxc Rxyjfx Amrsln * Subject to prior sale, errors and alterations excepted

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. Bjdpszvm Ukjfx Amroln DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain