Used 2016 Makino A 51 Nx for sale (69,760)

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. Bdjdpfx Adezg N E Hsred 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: used, Year of construction: 2004, Horizontal machining center Manufacturer: Makino Type: a51-A60 Year of manufacture: 2004 Control: CNC FANUC System 16 iM Travel distances: X/Y/Z: 560 x 560 x 500 mm Distance from table center to spindle nose: 70 – 570 mm Maximum swiveling height from pallet surface: 900 mm Permissible swiveling range in the work area: 630 mm Tool magazine: 60 tool positions Maximum load weight: 180 kg T-command, 4 digits, freely assignable Tool change time: 0.9 sec. Maximum tool dimensions: Ø 70 mm, 360 mm long Maximum tool weight: 8 kg Spindle unit 50 – 12,000 rpm Spindle unit with tool holder for tapered hollow shanks according to DIN 69893 HSK-A63 Tool clamping force: 29 kN Pallet changing system, integrated into the machine Pallet change time: 7 sec. Pallet changer with storage of 2 pallets in alternating sequence on a storage station Pallet holder rotatable, indexed 90° division 0-position electrically controlled. Permissible load weight max.: 400 kg Pallet size: 400 x 400 mm High-speed machining Contour milling with feed rates up to 40,000 mm/min. Function can be used for milling in 3 axes X, Y, and Z 2 ½ axis operation (X/Y axis circular, Z axis linear) for thread and curve milling Direct thread cutting by synchronizing the feed drive of the Z-axis via pulse encoder in the spindle motor Maximum speed: n = 4,000 rpm Feed drive with AC servomotors Rapid traverse speeds X, Y, Z axis = 1 … 50,000 mm/min. Feed rates X, Y, Z axis = 1 .. 40,000 mm/min. Manual operation, freely movable, via direction keys Coolant system Chip and splash protection central chip/flush system Machine light All-round flashing beacon, 3-color Total weight: 7,800 kg Space requirement approx.: 11.5 m2 Overall height approx.: 2.7 m 2 machines available! Bdedpjzc Ifrefx Adred 2726

Condition: used, Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining - ATC for 60 tools - Pallet changer (2 pallets) - Pallet size 500x500 mm - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system Bodpfx Aeyrfxhedrjdd - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, operating hours: 55,569 h, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, number of slots in tool magazine: 126, controller model: Fanuc 16 MC Professional 3, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 560 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Tool interface: HSK-A63 DIN 69893 Tool magazine: 126 positions Tool change time: 1 s Max. tool diameter: 80 mm Max. tool length: 300 mm Distance from spindle nose to table: 150 - 710 mm Distance from table top to spindle center: 80 - 640 mm Pallet size: 400 x 400 mm Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table rotation speed: 5000 rpm Spindle drive: 22 kW Feed rate: max. 40,000 mm/min Rapid traverse rate: 40,000 mm/min MACHINE DETAILS Bsdszb Ewpepfx Adrodd Control system: Fanuc 16 MC Professional 3 Total power consumption: 64 kW Dimensions & Weight Footprint: approx. 9.0 x 3.0 x 2.8 m Machine weight: approx. 15 t Operating hours Spindle hours: 55,569 h Program runtime: 66,600 h Power-on time: 163,411 h

Condition: excellent (used), Base pallets for MAKINO A77/81 Dimensions: 630 x 630 mm with T-slots, slot spacing 125 mm Several units available! Bdedpfxsyl Sv To Adrsd

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Bodpfxsxvzr Rj Adredd Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Bedpfx Asyqu I Aedredd

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C Bdjdpfxeyubcns Adrsd The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,774 h, functionality: fully functional, working width: 510 mm, warranty duration: 12 months, tank capacity: 40 l, total height: 1,145 mm, total width: 620 mm, total length: 1,249 mm, water tank capacity: 40 l, We have for sale a Karcher B 40 W Bp Dose walk-behind scrubber dryer. Condition: Very good Year of manufacture: 2016 The machine is in excellent condition, both visually and technically. It has undergone a thorough and detailed refurbishment, ensuring it is fully operational and ready for immediate use. All of our machines are presented in genuine photos—what you see is exactly what you get. A 12-month WARRANTY is provided on all equipment purchased from us. Equipment included: - New batteries - New disc brushes - New squeegee rubbers - Charger Technical specifications: - Power supply (V): 24 (battery powered) - Working width, brushes (mm): 550 - Suction width (mm): 850 - Theoretical area performance (m²/h): 3300 - Practical area performance (m²/h): 1980 Bsdpfx Aow Ifbnsdredd - Tank capacity, clean/dirty water (l): 40 / 40 - Brush contact pressure (g/cm²): 140 – 160 - Brush rotation speed (rpm): 1200 - Rated power (W): max. 1300 - Drive motor (W): 130 - Dimensions (L x W x H) (mm): 1249 x 620 x 1145

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. Bedpfxskv Urws Adrsdd The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items.

Condition: good (used), We are offering for sale a used shelf connector for double rows of shelving, manufactured by Link 51. The shelf connectors are designed for a shelf spacing of approximately 400 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Bjdpfx Aded Tyizsrjdd Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 515 mm Shelf spacing: approx. 400 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.321 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Here, we offer a used shelf connector for double rows of shelving from the manufacturer Link 51 for sale. The shelf connectors are designed for a shelf spacing of approximately 300 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double rows of shelving Material color: anthracite Overall length: approx. 415 mm Shelf spacing: approx. 300 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.092 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8 Bodpfx Adod Tymderodd

Condition: good (used), We are offering you a used shelf connector for double shelf rows from the manufacturer Link 51 for sale. Bjdpjd Typysfx Adrjdd The shelf connectors are designed for a shelf spacing of approximately 650 mm. Technical data for the shelf connector: Manufacturer: Link 51 Type: Boltless XL The scope of delivery includes: 01x Used shelf connector (consisting of 2 profiles) Suitable for: Double shelf rows Material color: anthracite Overall length: approx. 765 mm Shelf spacing: approx. 650 mm U-profile: approx. 27 x 30 mm Weight/piece: approx. 1.878 kg/piece 04x Hex head screws, M8 x 45 04x Hex nuts, M8 04x Washers, M8

Condition: good (used), Technical data for the pallet racking beam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Clip: 3 HK (hook) Clear width: 2,700 mm Max. load per beam pair: 900 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal beams against unintentional lifting out Bjdpfx Adjkvnm Aorjdd Additional information about the pallet racking beam: Beam type 4 BST is used to insert chipboard, steel panels, etc., which then end up approximately flush with the top edge of the racking beams. This avoids any height loss. Furthermore, the front of the step beam protects the floors or the insertion segments from damage. The beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, etc.

Condition: new, Technical data for the base plate: Manufacturer: Link 51 Type: Boltless XL suitable for frame profile: M,H,E and S Included in delivery: 01x base plate, new Material color: sendzimir galvanized Material thickness: 4 mm Total width: 96 mm Total depth: 137 mm Number of drill holes: 3 pcs. Drill hole Ø: 14 mm Weight: approx. 0.480 kg | pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bedpfjrg D Awjx Adrodd General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow type of truss: B120ZC box profile: 120x50 mm agraffe: 3 hooks clear width: 2.700 mm max. load per truss pair 2.700 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Bdedpfxolwuw Ue Adred General information about the article: This item is offered for pickup only. A desired beyond that Transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: like new (used), Year of construction: 2016, Solid fuel boiler. Bdjdpfx Adey S E Nzsrod

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Bdjdpfx Aoy I Ak Iedrsd Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: ready for operation (used), Year of construction: 2001, A horizontal CNC machining center Makino is available. Travel path X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. workpiece weight: 500kg, indexing: 0.001°, rapid traverse: 84m/min, feed rate: 50m/min. Machine dimensions X/Y/Z: approx. 4650mm/1950mm/2850mm, weight: approx. 8600kg, control system: Fanuc System 16iM/Makino Professional 3. Documentation available. An on-site inspection is possible. Bodpfxey S A Nrs Adrsdd

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 185 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 200 mm, total height: 850 mm, total width: 780 mm, wire diameter (max.): 0.3 mm, overall weight: 250 kg, product length (max.): 800 mm, number of axes: 3, wire diameter (min.): 0.1 mm, This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details. • Spindle speed: 150–2000 rpm • Spindle drive power: 0.75 kW (at 100% duty cycle) • Tool changer: Automatic, 10 stations Bdjdpfx Adjy Hi T Tsred • Tool holder: SK 30 (DIN 2080 / DIN 69871) • Feed rate (X/Y/Z): 5–500 mm/min • Rapid traverse: 500 mm/min • Clamping area: 420 x 125 mm • Max. workpiece weight: 10 kg • Power supply: 230 V / 50 Hz • Availability: Not specified

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Length of the working table 500.4 mm Width of the working table 500.4 mm Maximum table load 700 kg Bodpfx Adsy D Sirersdd Antalet verktyg i magasinet 136 st Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 80-4310-0003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, torque: 245 Nm, controller manufacturer: Fanuc, controller model: System 16 iM, workpiece length (max.): 600 mm, workpiece width (max.): 300 mm, workpiece height (max.): 600 mm, overall weight: 17,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 16,000 h, spindle nose: 350, number of spindles: 1, number of slots in tool magazine: 89, mount diameter: 100 mm, tool weight: 20,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Further detailed information can be found in the attached documents and photos. Sale price upon request, price negotiable. Bjdpfxoy Nm E Se Adrodd

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Bdodjyxn Awepfx Adred

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts * Bdedevfdvbspfx Adrjd

Condition: used, Year of construction: 2005, Technical details: size of pallet: 400x400 mm numbers of pallets: 15 Bdodpfx Ajvc Adlodrsd table load: 400 kg weight of the machine ca.: 0,060 t dimensions of the machine ca.: 0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale *