Used 1994 Elumatec Mgs 205 for sale (1,685)

Year of construction: 1994, condition: used, Max. saw blade diameter: 550 mm Manual swiveling with digital display Motor-driven axis for tilting the saw blade with digital display and speed setting via potentiometer Stepless saw blade feed Minimum quantity spray device Tedpfjynacyjx Amyea Weight: approx. 1,000 kg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0733337017, Swivel range: 0° to 45° adjustable in both directions, steplessly. Locking points: At 15°, 30°, and 45°. Saw blade diameter: 380 mm. Saw blade speed: 2800 rpm. Power output: 3 kW. Compressed air connection: 7 bar. Tjdpfx Aszphi Nsmyja Dimensions L x W x H: 850 x 900 x 1450 mm. Weight: 250 kg.

Condition: used, Year of construction: 2007, Technical data: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Tjdpfx Amorwlwvjyea Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Year of construction: 2005, condition: used, Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of the angles between 45 and 90 degrees Digital Angle Indicators Feed with 2-hand operation Tsdszf Agzjpfx Amyoa Roller beds and length stops on request Weight: approx. 1,000 kg

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Todpfxey Uyfpj Amyoa

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Tedpfx Asuiy Ngemyea Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, power: 14 kW (19.03 HP), input current: 80 A, workpiece length (max.): 4,000 mm, machine/vehicle number: 6080008129, TECHNICAL DETAILS Maximum profile width: 130 mm Maximum profile height: 205 mm Maximum workpiece/profile length: 4,000 mm Processing capacity: 80 units MACHINE DETAILS Tsdpozlnvuefx Amyoa Connection: 3 N/PE 400 V Frequency: 50 Hz Current: 80 A Power: 14 kW EQUIPMENT Powered, continuously adjustable gripper Lifting function for smooth feeding Profile guidance on rollers Internal gripper to prevent damage to the profiles Integrated measuring sensors for workpiece length control Workpiece removal via outfeed table Portal design for high profile cross-sections Industrial PC with Windows operating system Barcode scanner

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Todpfx Amszhuyfjyja Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Tedpfx Ameznczksyja Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm MACHINE DETAILS Air consumption: approx. 50 l/cycle Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Tjdpfezqbp Eex Amyea Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Year of construction: 1996, condition: used, Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm Automatic positioning of the saw head via E 255 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides Tjdpfx Ameznyyqeyoa 2-Hand-Bedienung Machine is partially disassembled on squared timbers (about 3000 mm assembled)

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Tsdpfx Amjzqdw Esyja Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function depending on machine configuration MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Todpfx Aezqbltjmyoa Power supply: 230/400 V, 3~ Frequency: 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. Tedpfxozpwzbe Amysa The machine is in perfect working order and ready for operation.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 420 mm, total length: 6,100 mm, total width: 1,200 mm, total height: 1,400 mm, type of input current: three-phase, air pressure: 7 bar, Elumatec DG104 double-blade saw. Todpfxsznn Ivo Amyoa

Condition: excellent (used), I am offering for sale a professional fire-fighting pump, a PFJ GmbH Jöhstadt TS 8/8 model, manufactured in Germany according to DIN 14410. This unit is designed for use by fire departments, rescue units, and for applications involving pumping large volumes of water. The pump is equipped with a powerful gasoline engine, a control panel with electric start, pressure gauges, and a complete set of fire hose connections. The unit is in very good condition – it was used sparingly and shows only minor signs of storage. Technical specifications: Manufacturer: PFJ GmbH Jöhstadt Model: TS 8/8 DIN 14410 Year of manufacture: 1994 Pump type: FP 8/8 DIN 14420 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Rotational speed: 2725 rpm Gear ratio: 1.9 : 1 Weight: 147 kg Fuel: lead-free gasoline Country of manufacture: Germany Advantages: Todpfx Aszlknyemysa Very low operating hours – approx. 9.4 operating hours Robust German construction Electric start and manual starter Complete set of indicators and pressure gauges Ready for use Ideal for volunteer fire departments, professional fire departments, collectors, and companies involved in water management.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 26126, cutting length (max.): 4,500 mm, total length: 6,000 mm, total width: 1,950 mm, total height: 2,000 mm, We are offering this ready-to-use Elumatec DG 104/01 double miter saw, manufactured in 1993. The machine is fully functional. 6 m long, 3 axes. Manufacturer: Elumatec Model: DG 104 Year of manufacture: 12/1993 Machine type: Double miter saw Saw blade diameter: 420 mm Distance between saws, max. at 90°: 4,500 mm Distance between saws, min. at 90°: 335 mm Distance between saws, min. at 45°: 335 mm Saw blades can be tilted up to 45° Main motor: 4 kW Saw units can be swiveled Saw blades can be tilted Spray device Pneumatic clamping system Digital display Positioning control Cutting from below Control: ELUMATEC E 255 Conformity marking: CE mark Space requirement, length: 6 m Space requirement, width: 1.95 m Space requirement, height: 2 m Tjdpfxszmrk So Amyoa If you have any questions or require further information, please send us a message or call us. Subject to errors and omissions, all information without guarantee.

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tedpfx Aozmrhkemyea Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Todpfozmn N Rex Amyea Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm - Machining direction (front and back) Tedpezktdzjfx Amyja - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: used, Year of construction: 2013, We are offering for sale a two-head Elumatec ZS 720/00 LV welding machine, manufactured in 2005, designed for welding PVC profiles for the production of windows, doors, and frames. The two-head configuration allows for the simultaneous welding of two corners of the frame, ensuring precise processing and good productivity. The machine is characterized by its robust Elumatec construction and is suitable for professional use in companies that manufacture PVC window and door frames. Technical specifications: Manufacturer: Elumatec Model: ZS 720/00 LV Year of manufacture: 2005 Type: two-head welding machine Application: welding of PVC profiles Electrical supply: 3/N/PE – 380/400 V Frequency: 50/60 Hz Installed power: 5.2 kW Operating pressure: 7 bar CE marking Made in Germany The machine is used and is available at our location in Termini Imerese, Palermo. Tedpfx Aezmhuaomyja It can be viewed by appointment. Additional photographs, technical information, and videos can be provided upon request.

Condition: used, Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Tedpezi A Uaefx Amyoa Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), functionality: fully functional, ELUMATEC SBZ150 5-axis CNC profile machining center, manufactured in 2004. 5-axis CNC machining center for aluminum and thin-walled steel profiles. Todjylbvijpfx Amyea

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Tedpfsywxwpsx Amysa

Year of construction: 2001, condition: used, Manual length adjustment via handwheel with digital display Todpezh Iucofx Amyoa For attachment to any Elumatec single-head saw (right) Max. insertion length: 4,500 mm Pneumatic parking brake