Used Yamato Dataweigh Adw-E-1014S 14-Head Weigher for sale (79,615)

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Weight: 1,500 kg Guodpfx Ajxz Ehmjk Usg Used machine

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 290 mm turning length 900 mm Guedpfx Akevki Efe Usg turning diameter in the gap mm turning speeds 40 - 2000 U/min centre height 210 mm spindle bore 38 mm total power requirement 4,0 KW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions

Condition: good (used), MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connecting cable -Length: 10 m -Version: Dinse plug, gas hose, control cable -Connector: 14-pin Gedpfx Aoucmpysk Ujug -Transport dimensions: 620/600/H160 mm -Weight: 14.8 kg

Condition: good (used), Direct from UK factory where it was filling water based solutions into bottles. Single head version also available. Guedpfxjyzcv Ds Ak Usg

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request. Gjdpfxoibzbhe Ak Usug

Condition: good (used), Year of construction: 2015, operating hours: 7,885 h, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, Empty weight: 3.626 kg Lifting capacity: 1.400 kg Technical condition: good Visual appearance: good Gedpfx Ajzffmwsk Uoug Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2017, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 94 kW (127.80 HP), We are offering this used ROQ ROQPRINT ECO P14 XL screen printing machine, year of manufacture 2017. Includes a ROQ screen printing dryer from 2014. Both units are in good working condition with no known issues. The package includes numerous accessories such as various pallets, screen printing frames specifically designed for the Roq click system, squeegees, and extra squeegee rubbers. Optionally available: a table for fitting the click system onto the frames, a film printer, and a machine for sharpening squeegees. In short, everything you need to start immediately or take a significant step towards more professional production. Model: ROQPRINT ECO P14 XL Serial number: RPE-1601 Year: 2017 Active power: 94 kW Voltage: 3×400 VAC Power: 94 kW Air pressure: 0.7 MPa (100 Psi) Gedpfoyzr Sujx Ak Ujug You are always welcome to visit and inspect the equipment. Some accessories are also sold separately. If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Compact welding cell ABB Robotics IRB 1400 with manual rotary table and Fronius TPS 4000 welding machine. Guedpfjzmq U Nox Ak Uog Overall dimensions: approximately 4000x2350mm Robot: ABB Robotics IRB 1400 Controller: S4-M98A Max. working radius: approximately 1450mm Payload: 5kg Year of manufacture: 1998 Used – normal signs of wear and tear. Further details, article numbers and pictures available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city and postal code. Freight costs available upon request – please specify delivery address.

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Guedpfjwz R Iujx Ak Ueg Delivery time: by arrangement Freight basis: ex-works

Condition: new, *AVAILABLE IMMEDIATELY* Includes: E & emergency hand pump, full steel floor Equipment: - 18 lashing points - Battery charger - Electric pump Net price: €8,277.31 / Gross price: €9,850.00 Article number: UDK235422011.01 Technical data: • Brand: Unsinn • Model: UDK 4220-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 426 x 204 x 35 cm • External dimensions (L x W x H): 575 x 221 x 120 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,140 kg • Payload: 2,360 kg • Chassis: Low loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber suspension axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Attachment option at all 4 corners for tarpaulin frames, grille attachments, side wall attachments or front wall extension • Sturdy toggle lever locks • Full steel floor, 3 mm hot-dip galvanized - extremely robust • Drawbar and frame, hollow profile construction welded together and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All cross and longitudinal members rest on the ground • 18 lashing eyes countersunk in the steel floor, (symmetrically distributed), with pot magnet (1,500 DaN/kg) • U-profile on the rear, for easier placement of the ramps • Ramp compartment • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency pump, manual, incl. socket insert, for tipping by hand when the battery is empty • Removable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber suspension axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg • Premium jockey wheel with ratchet strap roller _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair workshop for over 30 years. Gjdpfx Aezugh Uok Ujug - Errors, omissions and prior sale excepted -

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 7.385 kg Axle 1: left 10 mm right 10 mm Guedpfjxqn Hqsx Ak Uog Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB 1400 S4C + M2000 robot with a rotary table and Fronius TPS 3200 welding machine, as well as a Fronius burner cleaner. Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of manufacture: 2003 Scope of supply: Robot, controller, cables, teach pendant, circuit diagrams Floppy disk drive for data backup, Fronius TPS 3200 pulse welding machine, rotary table, Fronius robot hose package. Used item – shows normal signs of wear, but is fully functional. Further details, article numbers and pictures available on request. Gujdpfx Ajzl Anxjk Usg Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Year of construction: 2007, condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Gsdpfx Aev Dkcfek Ueug

Condition: used, functionality: unexamined, mileage: 5,100 km, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 8,000 h, Powerscreen Chieftain 1800 Double-Deck Screen 2007 Double-deck - 3 fractions, the screen for sale will have an additional fourth conveyor Two independent sieves for improved screening of fine fractions Upper deck area 4800x1350 mm Lower deck area 4200x1350 mm Capacity up to 200 tons per hour with a fraction of 0-31-63 mm Maximum material inlet 100 mm Hydraulically opening grate on the hopper CAT 100 HP engine Guedpjzii Tisfx Ak Uog Weight 34 tons

Condition: new, Year of construction: 2014, functionality: fully functional, Lightweight robot, Cobot KUKA iiwa 14 R820 Sunrise, cabinet, new/original packaging Gedpszmtrqefx Ak Uoug Serial number: 981258 Year of manufacture: 12/2014 Number of axes: 7 Max. payload: 14 kg Max. working range: approx. 820 mm Scope of delivery: Robot, controller, cables, teach panel Used item – normal signs of wear. Further details, article numbers and pictures available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Due to the weight and size of the robot, it could be shipped within Germany for €95 gross. Shipping costs to foreign countries on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm Gusdpewunwyofx Ak Usg 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, overall weight: 50 kg, In very good condition, includes an aluminum round table. Tabletop dimensions: 220 mm. Drive motor: standard brake motor. Weight: 50 kg. Gsdpfx Akozgvwce Ueug

Condition: used, Year of construction: 1996, overall weight: 860 kg, We are offering this used Hotung pallet stacker, model 2/141/PW1, manufactured in 1996, for sale. Guodpfx Akozv Tt Ts Uog Due to the relocation of our production facility, we have undergone technical changes and no longer require it. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), functionality: fully functional, electrical fuse: 16 A, input frequency: 50 Hz, input voltage: 400 V, power: 2 kW (2.72 HP), funnel diameter: 650 mm, ejection height: 1,100 mm, type of input current: three-phase, DGUV certified until: 07/2027, overall weight: 500 kg, Weighing system Scheurer SV 140 E LED display for weight adjustment with central lubrication robust technology machine is mobile with 2 locking mechanisms belt: Mehler discharge conveyor belt, height-adjustable, long connection: 400V, 16A-CEE plug used machine Optional: Guodpeyaki Iofx Ak Ueg Maintenance contract Spare parts box Service package Delivery service Instruction and commissioning Visit our large showroom!

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Gjdpjzk N Amjfx Ak Usug Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Gusdpfozqvhvjx Ak Uog

Year of construction: 1990, operating hours: 21,834 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 059700605, Bobst SP 142-CER from 1990 for sale – Reason for sale: replacement investment made. The machine can be inspected in production. Dismantling and transport at buyer's expense. Gusdpfx Aey Htxgjk Uog

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min Gsdpfsxpvbtjx Ak Ujug MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Gjdpfx Ajzbyn Njk Uoug Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Gedpfewlkcasx Ak Uoug Payment terms: 100% before takeover of the machine, net