Used Wotan Rapid 1 R/3 Cnc for sale (120,221)

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. Gbedpfx Abjuh Rzqogen The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 | 12 MM 200 EURO| 6 MM 125 EURO|3 MM 100 EURO| INCL VELG. Gbodsxva Udepfx Abgen

Condition: excellent (used), mileage: 98,000 km, power: 331 kW (450.03 HP), first registration: 04/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, operating hours: 4,893 h, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Accessories = - Aluminium fuel tank - Low noise emission - Speed limiter - Intarder - Refrigerator - Alloy wheels - Air suspension - Rear-view camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication - Towing hitch = Additional Information = Axle configuration Suspension: Air suspension Front axle 1: Alloy wheels; steerable Front axle 2: Alloy wheels; steerable Rear axle 1: Alloy wheels Rear axle 2: Alloy wheels Weights Unladen weight: 29,100 kg Payload: 7,900 kg Gross vehicle weight: 37,000 kg Functionality Gbjdpjv Uavvjfx Abgon Crane: Palfinger PK 165.002 TEC F + JIB PJ 300L F, year of manufacture 2017, mounted behind the cab Body brand: Palfinger PK 165.002 TEC F + JIB PJ 300L F CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional Gbodotx Nwnopfx Abgjn

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Gedpfoxdy R Iex Abgobn Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Gbsdjxvbauopfx Abgjn GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 8 MM 150 EURO 6 MM 125 EUR 4/3 MM 100 URO INCL VELG.

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2026, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head Gsdoxfq Dbopfx Abgsbn - Compact print head dimensions - Motor power 1.5 kW

Condition: new, B&R 0PS3200.1 Power Supply / Power Supply Unit SN: AF651013647 – 3-phase / 24VDC / 20A, unused in opened original packaging (film is still sealed), 100% functional, scope of delivery as shown in the photos. Gbedey Npwqopfx Abgsn

Condition: new, B&R 0PS3200.1 Power Supply / Power Unit SN: AF651013330 - 3-phase / 24VDC / 20A, unused in opened original packaging (protective film still sealed), 100% operational, scope of delivery as per photos. Gsdpfx Aox Ht A Eebgjbn

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S Gsdpfjp Rb Hcjx Abgjbn - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls Godpsyxg Tuefx Abgobn - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine Gjdpfx Ajyxg Tnobgobn - fully functional manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 manufacturer no.: 3NC150.6

Condition: used, B&R 2010 DO430 digital output - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional Gbsdpfjw Ah Nxsx Abgsn manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 manufacturer no.: 2DO430.6

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine - fully functionalmanufacturer: B&R Gbedpfxjw Ah Nre Abgsn manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 230 V, total length: 6,100 mm, total width: 1,270 mm, total height: 1,520 mm, overall weight: 1,112 kg, conveyor belt width: 910 mm, M&R Radicure 36/10 Dryer - Selling due to business closure £7,500 + VAT (ono) Located in Mid Wales, UK Excellent condition Dimensions & Power Specs Belt Width: 36 inches (91 cm). Chamber Length: 10 feet (305 cm). Infeed Extension: 5 feet (152 cm). Outfeed Extension: 5 feet (152 cm). Total Length: 20 feet (610 cm). Electrical Draw: 208/230 Volts. Phase Requirement: 3-phase electrical setup Gbedpfx Ajzb N Swjbgen Sold separately or part of a package in another listing We can provide contact details for experienced machinery relocation specialists who are familiar with dismantling, transporting and reinstalling screen-printing equipment. The purchaser will be responsible for dismantling, transport and installation of the equipment. Everything clean and ready to use.

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. Gbodetximvspfx Abgsn EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R Gbjdpfxjr Hnglo Abgsn 12 compartment

Condition: excellent (used), For sale: Siemens 1FK6042-6AF71-1GH0 servomotor. The unit is in very good visual and technical condition. It was removed from a functioning industrial machine. The motor rotates smoothly, and the shaft has no play. Normal signs of use are visible. Gbedpfx Aboy Umndjgjn Technical specifications: Manufacturer: Siemens Model: 1FK6042-6AF71-1GH0 Type: 3-phase servomotor Stall torque M0: 3.2 Nm Rated torque MN: 2.3 Nm Current I0: 2.8 A Rated current IN: 2.2 A Maximum speed: 8500 rpm Rated speed: 3000 rpm Encoder: A-32 Brake: 24VDC 13.4W Protection class: IP64 Made in Germany Condition: Used Functional Normal signs of use Condition as shown in the photos Included: Siemens servomotor

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine Gbedpfswfdm Eex Abgsn EPS cutting machine with 4 independent moving axes and variable machine table.

Condition: excellent (used), For sale: professional KOMET KFK 1 M02 02360 boring head with micrometric adjustment – a top-tier tool for high-precision hole machining in industrial production and toolrooms. Very good condition – the tool is fully functional and ready for operation. The precise micrometric scale allows adjustment with an accuracy of 0.01 mm, ensuring the highest surface finish quality. • Manufacturer: KOMET • Model: KFK 1 – M02 02360 • Mount: SK40 / DIN 69871 • Scale: micrometric 0.01 mm • Range: precision boring and finishing of holes • Condition: used – very good technical and visual condition. Gbsdpfoxk T H Nsx Abgon

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Gedpfx Aow Sy D Ejbgsbn

Condition: excellent (used), I am offering a circulation pump from the renowned brand WILO, model TOP-E 40/1-10, equipped with electronic control. The pump is intended for heating systems, HVAC, and industrial applications. It features an electronic module with a display and operation adjustment, which allows for the optimisation of energy consumption and performance. 🔧 Technical data: Manufacturer: WILO Model: TOP-E 40/1-10 Power supply: 230V / 50 Hz Type: electronic circulation pump Connection diameter: DN40 (approx. 40 mm) Insulation class: F Degree of protection: IP43 Pressure: PN6 Medium temperature: up to 110°C Rotation speed: 850 – 2850 rpm Power: 30 – 570 W Gbedpfx Aey Abf Hebgjn Current: 0.45 – 4.80 A 📦 Condition: Used item. Shows normal signs of use but is in good technical condition and fully functional. 📌 Additional information: Electronic operation regulation High-quality workmanship – made in the EU Ideal for central heating, industrial, and circulation systems Robust construction

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos Gbedpfxjyzulwe Abgon 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: excellent (used), I offer robust centrifugal fans (blowers) in excellent condition – equipment is virtually unused. Perfect for industrial applications, ventilation, extraction, filtration systems or workshop installations. Godpfjyypgtsx Abgjbn ⚙️ Technical data (from the nameplate) Power: 0.75 kW (1 HP) Supply: 3-phase 200/400V Frequency: 50 Hz Speed: ~1395 rpm Protection rating: IP54 Motor type: TECO 3-phase induction motor 📏 Dimensions (approximate) Inlet diameter: approx. 24–25 cm Construction: steel housing + metal impeller ✅ Advantages ✔ condition very close to new ✔ solid industrial build quality ✔ efficient 3-phase motor ✔ compact size ✔ ideal for dust, chip extraction, and ventilation systems - PRICE INDICATED PER UNIT.

Condition: new, For sale: Industrial electric motor, 7.5 kW, flange-mounted design. The motor comes from warehouse stock and has never been used. Visible storage marks and significant rust on the housing – condition as shown in the photos. Ideal for industrial applications, pumps, fans, machinery, and production equipment. Technical data: Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 380–420 V Frequency: 50 Hz Power supply: 3-phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Gbodpfx Aoyv Utkjbgjn Weight: approx. 65 kg Flange-mounted design Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: New old stock Never used Visible rust on the housing