Used Wegoma Corner Joint Press for sale (15,157)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm Itedpfxsw Sgnks Aa Esi - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Iodpfx Aotnz Ttoa Ejti Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Itedpfxsh D If He Aa Eei Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Itedpsil Hggjfx Aa Eoi User-friendly operation thanks to Siemens PLC control To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Foreign object-resistant conveying screw thanks to cardan suspension The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2026, condition: as good as new (ex-display), Vacuum membrane press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive, thereby increasing performance. Possible applications: Ijdpfsdvltysx Aa Eoti Veneering / Form gluing / Covering... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components The heating system is equipped with temperature control Rubber membrane 2.5 mm Tabletop is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump flow rate: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Available from stock in 54634 Bitburg - free loading -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Isdpfoiidm Nox Aa Eoti Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure Itedpfxexgbxfe Aa Eoi - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Ijdpfx Ajdwh E Aea Esti Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Itodpfx Aaotnz Hbs Eei Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Ijdjcdr E Ajpfx Aa Ejti Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm max. ejector stroke 90 mm max. ejector on the punch side 20 mm Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Itedpfxozd Da Ho Aa Esi Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. No major defects are known to us, and the machine has functioned perfectly up to the present.

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm Itedpskk Exjfx Aa Eei output: 300 St./min.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg. Itsdowuutbspfx Aa Esi Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm Itodpfxeyylhas Aa Eei stroke: max. 310 mm weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. Ijdpfx Aasgwv S Uj Eeti daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg.

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Itsdjzlaitjpfx Aa Eji Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Additional veneer cassette. Itjdjzlaimepfx Aa Eei Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: excellent (used), functionality: fully functional, Titan Erba 5-EM Printing Press Condition: Like new The machine was manufactured in 1977. A complete overhaul of the machine was carried out in 2007 in Germany by Broth! * Maximum sheet size: 1600 × 1000 mm Isdpszazvlsfx Aa Eoti * Safety system * Operating modes: timer / single cycle / continuous operation. Quick-release frame, electromagnetic clutch.

Condition: good (used), Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Iedpfx Aajzlahve Esti Speed: 7000 sheets/h Vacuum feeder

Year of construction: 1976, condition: used, Year of manufacture: 1976, overhauled: 2003 Maximum pressing force: 500 KN, Maximum extraction force: 400 KN, Maximum holding force in the pressing position: 400 KN, Maximum die return force: 20 KN, Upper punch stroke: 120 mm, Upper punch section: 220 mm, Number of strokes: 7-32 1/min, Maximum filling height: 180 mm, Itedpfszmh Rhox Aa Eei Maximum pressing stroke: 90 mm, Maximum extraction stroke: 90 mm, Maximum pressing stroke: 12 mm, Pneumatic upper punch tension: Maximum: 100 mm, Compressed air supply, Air consumption, Intake air: 200 1/min, Total connected load: 18.00 kW, approximate width: 2000 mm, approximate depth: 1700 mm, approximate height: 3250 mm, press weight (approximate): 5,500 kg, press housing: 190 l (running oil), operating noise: 78 dB (A)

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Iedpfxoyrpxxo Aa Esti

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Itedpfx Aasyrpw Is Eoi

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 220 t, stroke length: 470 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, table width: 900 mm, table length: 3,200 mm, throat depth: 400 mm, Equipment: safety light barrier, Machine type Electro-hydraulic servo numerical control bending machine Order Type Non-Standard Basic parameter Pressure 220t Workbench length 3200mm Workbench height 900mm Column spacing 2500mm Throat depth 400mm Slider stroke 200mm Maximum opening height 470mm Fast descent speed 120mm/s Return speed 120mm/s Work speed 10mm/s Rear gauge (X-axis travel) 550mm Maximum operating speed of the X-axis 400mm/s X-axis positioning accuracy ±0.05mm X-axis repeat positioning accuracy ±0.02mm Y-axis positioning accuracy ±0.02mm Y-axis repeat positioning accuracy ±0.01mm R-axis stroke 100mm Maximum operating speed of the R-axis 100mm/s Itodjzgzt Nopfx Aa Eji Working accuracy: Straightness ±0.2mm/m, angularity ±0.5°/m KW Main motor power (servo motor) KW 22KW Rated power (servo motor) KW 25.03KW Fuel tank capacity 200L Oil product model 46# Hydraulic Oil" Overall dimensions (length * width * height) 4200mm*1950mm*2700mm Weight 12T

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Iedoywadwspfx Aa Esti Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008215, Max working length: 2300 mm Itsdpfx Aox A Tihoa Eji Max working width: 1300 mm Pressure Exerted: 15 Kg/cm2 No of Pressing cylinders: 4 No of Daylights: 10