Used Wagner Wm 2000 for sale (8,099)

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Dodozka Hijpfx Ac Hjci Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Dedezkaflepfx Ac Hsci Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Dedszi Uyujpfx Ac Hjci Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: new, Special offer price for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 75 x 2000 S Condition: new Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen sanding table: 460 x 75 mm Dust extraction connection: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: Good sanding performance due to high belt speed Dsdpfx Acofnr Ais Hjci Quick adjustment for horizontal and angled positions Continuous platen sanding surface for optimal sanding of long workpieces Consistent belt tension thanks to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for round sanding Including quick-release system for fast belt changes Simple adjustment of parallel belt run by means of adjusting screw Graphite coating on the platen sanding surface increases the sliding properties of the sanding belt Scope of delivery: - Sanding belt K 80 - Folding protective cover - Sanding and support table - Workpiece stop - Dust extraction nozzle - Separate on/off button - Base frame

Condition: new, Special offer for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New Dcsdpfsb Hhkgex Ac Hji Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen table: 460 x 75 mm Dust extraction connection Ø: 100 mm Motor output power S1 100%: 2.4 / 3.0 kW Motor input power S6 40%: 3.0 / 4.0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg New item in original packaging.

Condition: new, Special promotional price for in-stock items! While supplies last! Price ex warehouse, plus VAT. Belt sanding machine: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 155 mm Platen sanding table: 460 x 150 mm Dust extraction connection Ø: 100 mm Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, ideal for sanding stainless steel - Universally applicable for sanding edges, surfaces and for round sanding - Graphite coating on the platen sanding surface increases the gliding properties of the sanding belt - Consistent belt tension thanks to spring-loaded tensioning device - User-friendly belt change, quick and easy - Good sanding performance thanks to high belt speed - Quick adjustment for horizontal and angled position - Universally applicable for crafts and industry - Large-sized platen sanding surface with protective cover - Including fine adjustment for parallel belt running Scope of delivery: - Sanding belt K 80 - Foldable protective disc - Sanding and support table Dcsdpfx Acjb Hhh Dj Hei - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubberized sanding roller - Graphite coating - Separate on/off switch - Base frame Promotional price ex warehouse Mindelheim, free on board. Art. 05-1249

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Dcedoxzq I Sjpfx Ac Hji Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device Dodjqvmqyjpfx Ac Hoci - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: new, Versatile discharge roller conveyor with height-adjustable legs, scale, and stop. Ideal for the safe discharge of long workpieces. Selected variant: Dcedpfx Acsw I R Utj Hoi AR 2000 Length: 2000 mm Roller width: 360 mm Height adjustment: 620 - 1030 mm Features: - With scale and stop - Height-adjustable - With mounting plate

Condition: excellent (used), functionality: fully functional, CALANDRA 2000 X 6 3 ROLLERS Dsdpfx Acszi Rnuj Hoci USED MACHINE INTERNAL CODE: SVR 420

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR Dodpfx Aozb Ifvjc Hjci 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: good (used), Year of construction: 1998, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1700 x 1010 mm CNC turning machine Loading magazine: LNS Tryton 112 MAIN SPINDLE - Max. bar diameter: 10 [mm] - Travel: 66 [mm] - Spindle speed: 16,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] COUNTER SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 12,000 [rpm] Dcjdpszhxk Iefx Ac Hei - Spindle drive power: 3.7 [kW] --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2003, control FANUC weight of the machine ca. 1,5 t Dcedpfxezhxkzj Ac Hoi dimensions of the machine ca. 1,7 x 1 x 2 m CNC turning machine Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: good (used), Year of construction: 2000, control FANUC weight of the machine ca. 1,5 t dimensions of the machine ca. 1,7 x 1,0 x 2 m CNC turning machine Dsdpfozhxkujx Ac Hoci Loading magazine: LNS Tryton 112 --> Loading magazine dimensions: Length approx. 4800 mm / 450 kg

Condition: used, Year of construction: 2002, functionality: fully functional, Conveyor Belt SCHUMA PRO-WA500/2000/300/S20 (2002) Dsdpfx Acjzhuzie Heci Dimensions (m): 2,5x0,51x1,35 (LxWxH)

Condition: good (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, control voltage: 24 V, Fat baking machine, Riehle Line 2000 Tilting basket for a maximum of 36 pieces Lifting and lowering controlled by the system 1 proofing trolley with 10 aluminum tipping trays Baking process fully automatic Steam hood, electrically operated, proofing cabinet at the bottom Stainless steel construction Connection 400V, 16A CEE plug Used machine Dcsdpfx Ajy H Urzsc Hei We have many more fat baking machines in stock!

Condition: used, functionality: fully functional, mileage: 87,500 km, power: 162 kW (220.26 HP), first registration: 05/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, number of seats: 9, Year of construction: 1998, Equipment: additional headlights, The LHF 16 fire engine was in service at a major airport. The condition is good and it is ready for operation. Dsdpjy S Thfjfx Ac Hoci The equipment shown in the photos belongs to the vehicle and will be included. Water tank: 1230 liters Foam tank: 130 liters

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Dcsdpfx Acszi A S Ej Hei Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 Dcsdpfxozizkyj Ac Hei For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2021, operating hours: 538 h, functionality: fully functional, machine/vehicle number: 0503330621, total width: 920 mm, total length: 1,550 mm, total height: 1,300 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, fuel: diesel, overall weight: 725 kg, water tank capacity: 53 l, volume flow: 6 m³/h, noise level: 89 dB, power: 37 kW (50.31 HP), pump capacity: 10 l/min, Equipment: type plate available, used machine – fully functional – standard accessories available as optional extras Dcjdpfx Acszizicj Hji

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 robot, serial number 910491, industrial robot including control cabinet 57470. The KUKA KR 240 L210-2 robot is a {axis}-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications of the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, finishing, material handling, palletizing, remote TCP. Specifications Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Dodsziyfiepfx Ac Hoci Weight: 1277 kg Serial number: 910491 Control cabinet: 57470 Year of manufacture: 02/2008 Used – shows normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning warranty. No further guarantee. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L180-2 2000 robot, serial number 913761, industrial robot including control cabinet 52330. The KUKA KR 240 L180-2 robot is a {axis}-axis robot arm, with a payload of 180 kg and a reach of 3100 mm. Manufacturing applications include remote TCP. Dcjdpfxjzix Tre Ac Hei Common applications for the KUKA KR 240 L180-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, and remote TCP. Specifications Manufacturer: KUKA Model: KR 240 L180-2 2000 Type: Robot arm Axes: 6 Payload: 180 kg Reach: 3100 mm Repeatability: 0.12 mm Weight: 1277 kg Serial number: 913761 Control cabinet: 52330 Year of manufacture: 10/2008 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L180-2 2000 Robot, serial number 913762, industrial robot including control cabinet 64689. The KUKA KR 240 L180-2 robot is a {axis}-axis robot arm with a payload of 180 kg and a reach of 3100 mm. Manufacturing applications include remote TCP. Common applications for the KUKA KR 240 L180-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications Dcsdpfxozix Rks Ac Hsi Manufacturer: KUKA Model: KR 240 L180-2 2000 Type: Robot arm Axes: 6 Payload: 180 kg Reach: 3100 mm Repeatability: 0.12 mm Weight: 1277 kg Serial number: 913762 Control cabinet: 64689 Year of manufacture: 10/2008 Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm Dcjdpfxew Stndo Ac Hoi - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA robot KR 240-2 2000, serial number 910465, industrial robot including control cabinet 52697. The KUKA KR 240-2 robot is a {axis}-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, polishing, material handling, palletizing, remote TCP. Specification: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Serial number: 910465 Control cabinet: 52697 Year of manufacture: 01/2008 Used item – normal signs of wear. Further details, article numbers and pictures available on request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Free loading / ex works. Dcjdpfszixv Hex Ac Hji The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs abroad on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.