Used Vibratory Finishing Bowl for sale (4,171)

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Gbedpfxjzw Ukco Akyju Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Year of construction: 2026, condition: new, The ProFruit Industrial Root Vegetable Peeler, Washer & Polisher combines three preparation stages in one machine. It is suitable for preparing potatoes, carrots, sweet potatoes, ginger, taro and other root vegetables for juice pressing, commercial kitchens and food-processing operations. CAPACITY 300–1500 kg/h. OPERATING PRINCIPLE Root vegetables pass through nylon brush rollers that remove the outer layer and polish the product surface. An integrated water-spray system washes the vegetables during processing, producing a clean, uniformly finished product. FEATURES AND BENEFITS • Washing, peeling and polishing in one machine • Nylon brush rollers provide uniform peeling and a smooth finish Gbedpfx Akjz Ndx Hsyou • Controlled brush action helps minimize unnecessary product waste • Integrated spray system cleans effectively while conserving water • Suitable for potatoes, carrots, sweet potatoes, ginger, taro and similar root vegetables • High-capacity processing reduces manual preparation work TECHNICAL SPECIFICATIONS • Processing capacity: 300–1500 kg/h • Peeling and polishing system: nylon brush rollers • Washing system: integrated water spray • Product-contact materials: stainless steel or food-grade materials HYGIENIC CONSTRUCTION AND CLEANING The machine has a robust stainless-steel design. All product-contact surfaces are made from stainless steel or food-grade materials, supporting hygienic vegetable processing and routine cleaning.

Condition: used, Used Machine Features and Technical Specifications: - Max. cutting width: - at a cutting angle of 40°: 250 mm - at a cutting angle of 60°: 165 mm - Max. feed height: 180 mm Gjdpfx Asz I Uflskyebu - Adjustable cutting angle: 0–60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V - Dimensions: 1230 x 860 x 1270 mm - Weight: 385 kg

Condition: used, Year of construction: 2003, Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data - Manufacturer: SIG Corpoplast - Model: BLOMAX 18 Series III Gbedpjz Ng Aaofx Akyju - Year of construction: 2003 - Machine type: rotary stretch blow moulder for PET bottles - Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L - Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base - Blow air pressure: 40 bar - Blow air consumption, nominal: 1,072 m³/h on 0.5 L and 1,724 m³/h on 1.0 L at 27,000 bottles per hour - Connected load: 255 kVA machine, 62 kVA chiller - Working voltage: 400 V, 3 phases + N, 50/60 Hz - Rated current: 480 A, max. fuse 500 A - Control voltage: 24 V DC - Dimensions (L x W x H): 11.5 x 11.2 x 4.2 m including preform feeding - Weight: 30,550 kg - CE marked Scope of delivery - BLOMAX 18 blow moulder with preform heating oven and blow wheel - Two operator panels with touchscreen HMI - Electrical cabinets and media connections - Preform box tipper for octabins and mesh boxes - Inclined preform elevator - M. Tanner preform unscrambler with access platform - Chiller - Spare parts from stock, list available on request Blow moulds are not included in the sale. Condition Used in water bottling until August 2026. The machine is still installed and under power and can be inspected. Availability Dismantling is possible from week 49 of 2026; the machine is available from 30 November 2026.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction with slight frame offset * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate * Integrated mudguard mounting system with stone-repellent surface finish * Spray flaps only on last axle * 1 tarpaulin support bar with holder * 1 aluminium ladder approx. 3,550 mm with side mounting brackets * 2 rear towing hooks * Side-mounted tarpaulin bow holder on chassis ## Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle, additionally electronically controlled from the truck * Includes forced lowering and traction aid * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded pipe routing for easy maintenance * Two non-interchangeable coupling heads at the front * 24 V EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated Note: The trailer may only be operated with towing vehicles ensuring proper ABS functionality. ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve * Axle load detection via EBS CAN bus signal for display in the driver’s cabin ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin and 1 × 15-pin front sockets * 2 additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Steel Tipping Body (HB 400) * High wear-resistant HB 400 steel body construction Gbsdpfszhgkijx Akyou * Sloped front wall with external hydraulic cylinder mounting * Foldable aluminium protective sheet on right-hand side for sliding tarpaulin * External shovel and broom holder on front wall * Internal access ladder at front wall * Side walls: 4 mm continuous steel * Floor: 5 mm continuous steel ### Rear Door System * “Membrane” tailgate design * Two-piece rear door (50/50 split) * One sliding bolt integrated into right-hand door leaf * External rotary locking system with bottom mechanical locking ## Operating Platform & Equipment * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side

Year of construction: 2016, condition: used, overall weight: 4,500 kg, total length: 3,760 mm, total width: 3,000 mm, total height: 2,750 mm, Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling required Automation Loading robot: GF WorkPartner Automatic loading and unloading Depending on magazine configuration, total handling weight can be approx. 400–800 kg Description The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 equipped with an integrated WorkPartner loading robot. The machine is designed for high-precision contour cutting with excellent surface quality and stable process performance. Features such as the automatic wire threading system, integrated dielectric unit and coaxial flushing enable reliable unattended operation. The WorkPartner robot expands the machine into an automated manufacturing cell, allowing longer machining cycles and significantly increased productivity. Gbedpfjz Ivcrex Akyju Weight approx.: 4,500 kg Dimensions (LxWxH) approx.: 3760 x 3000 x 2750 mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and Gbodpezktq Iefx Akyou - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, color channels: 4, Equipment: auto duplex, documentation/manual, raster image processor, In this offer, you are purchasing a used Canon imagePRESS V1000 color production system. Item for Sale: 1 x Canon imagePRESS V1000 equipped with: Prismasync controller, complete with DocBox and Impose Staple Finisher AF1 Paper Deck E1 POD Deck XL A2 Stack Bypass Not the right configuration for your needs? No problem! We can customize the machine according to your requirements. Contact us! Meter Readings: Total: approx. 3,800,000 impressions Color: approx. 3,200,000 impressions Black: approx. 600,000 impressions Condition: This offer refers to a used device, which may show signs of wear (such as minor scratches or discoloration). The machine has been fully tested and is in working condition. A test print can be seen in the photos. Packaging and Delivery: You are welcome to inspect the machine during our business hours. Please arrange an appointment in advance. Seaworthy export packaging and worldwide shipping can be arranged upon request. Before delivery or collection, a functional test will be documented on video for your reference. Gsdpfx Aezghu Tokyebu For further information, please do not hesitate to contact us directly. The stated price is exclusive of VAT.

Condition: excellent (used), Year of construction: 2022, Column-slewing crane, Vetter, 1.500 kg, 6 m jib, 6 m high – unused: Price ex works: now only €9,950 instead of €13,950 (net)! Manufacturer: Vetter Type: Meister M Year of manufacture: 2022 Load capacity P: 1500 kg M15-6.0 Column-slewing crane designed according to the EC Machinery Directive, the applicable standards of EN 13001, and the VDE regulations, for outdoor use at 4 Beaufort (20 – 28 km/h; moderate breeze). Identification No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range SB: 360° ∞ Max. permissible lifting device weight Gk 180 kg Max. permissible lifting device speed VH 16 m/min Outreach A 6000 mm Lower edge of jib UK 6000 mm Overall height B 6470 mm Bolt circle diameter DL 630 mm Flange outer diameter DF 710 mm Girder flange width F 180 mm Approach dimension Aa 250 mm Approach dimension Ai 915 mm Support strut length B1 1540 mm Max. vertical force Vk max. 32 kN Max. moment Mk max. 11575 kNcm Weight 1756 kg Operating voltage 400 V Frequency 50 Hz Control voltage 24 V Paint finish: Tube column for outdoor use (corrosivity category based on C3), steel grit-blasted and coated with a paint finish in daffodil yellow RAL 1007, target layer thickness 120 μm. VETTER-AnchorFix system, consisting of anchor bolts, nuts, washers, lock nuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G) 2400 mm × 2400 mm, foundation depth (Gt) 1000 mm. Flat cable with cable trolley, C-rail, and tension arms for attachment to the girder. Short weather protection canopy, size 2, can be attached to the crane jib to shelter the lifting device in the rest position. Made of a sturdy, hot-dip galvanized steel tube construction with weather-resistant, plastic-coated tarpaulin covering, color rapeseed yellow RAL 1021. Absolutely necessary for outdoor operation. Can be used up to wind force 7. Dimensions (length x width x height): 1320 x 1520 x 1042 mm. Electric chain hoist, manufacturer VETTER, type electrolift® SiXX Designation SiXX8F Drive group FEM 9.511 2m Drive group ISO M5 Number of load strands 2 Load capacity 1500 kg Lifting height 5351 mm Overall height 649 mm Lifting speeds 4 / 1 m/min Lifting motor 1.45 / 0.36 kW Duty cycle 40/20% Weight 65 kg Protection class IP55 Electric travel unit, type SiXX-EF-22-200 Travel speed 24/6 m/min Travel motor 0.2/0.05 kW Duty cycle 40/20% Weight 19 kg Flange width 180 mm Detailed specifications and technical drawings are available upon request as a PDF. Former new price: €18,436 (net) Gbedjyhxk Hepfx Akyeu Condition: very good (this crane is new and unused – a classic mispurchase) Available: immediately Location: 30419 Hannover

Condition: used, functionality: fully functional, mileage: 205,999 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Gjdpjz Inl Eofx Akyjbu Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Volvo Extended Front cab: PART OF AERO CAB Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 7 mm Front right - 7 mm Rear left inner - 13 mm Rear left outer - 12 mm Rear right inner - 12 mm Rear right outer - 13 mm

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift designed for the efficient storage and retrieval of small parts using the goods-to-person principle. It is characterized by high storage density and ergonomic ease of operation. Functions and Advantages Goods-to-person principle: The system automatically brings the requested tray to the access point, minimizing walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access point (LOGI Gate) can be positioned at different height levels to ensure ergonomic retrieval. Optionally, the reach depth into the tray can be further reduced, which reduces the load on the operator. Software integration: The storage lift is equipped with a standard PLC control and can be integrated into customer-side WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system has two helical racks, which ensure robust, precise and reliable vertical transport of the tray, even with eccentric loading. Gsdsylmcnopfx Akysbu The SSI Logimat storage lift is used in many industries for the storage and retrieval of various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The application areas of storage lift systems are diverse: Storage of small parts Item management Buffer storage for production Order picking Storage and retrieval of maintenance and spare parts Storage of semi-finished products Technical data Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Storage Lift Serial No. 916.0498-A1 Control, Type PLC-EasyConnect Touch Display Height of storage lift: 6835 mm Width of storage lifts / tray: 4570 mm / 4025 mm Depth of storage lifts / tray: 3092 mm / 815 mm Useful load of machine 2x 25 t Number of levels/trays 44 Load capacity per level/tray 590 kg Size of storage locations adjustable Power supply: 400 V 50 Hz Nominal operating current: 24 A Max. power consumption: 17 kVA Total weight of machine: 36 t Year of manufacture: 2016 1 x side panel missing The storage lifts are arranged in a block configuration, which is why the inner side panels are missing. The professional dismantling, valued at €5,000 (net), is already included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal layout. Our specially designed storage bins make the most of the tray surface of your SSI Schäfer system (e.g. LogiMat), utilizing every last millimeter. The containers are available in three different sizes (S, M, L) and enable optimal use of the storage space in the lift system. Find the right dimensions for your system in our other auctions. "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." More storage lifts - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Vertical Lift Module The SSI Schäfer Logimat SLL is an automated vertical lift module designed for efficient storage and retrieval of small parts based on the goods-to-person principle. It is characterized by high storage density and ergonomic ease of operation. Functions and Advantages Goods-to-person principle: The system automatically brings the requested tray to the access opening, minimizing travel distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density in a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at different height levels to ensure ergonomic retrieval. Optionally, the reach-in depth into the tray can be further reduced, which reduces the strain on the operator. Software integration: The vertical lift module is equipped with a standard PLC controller and can be integrated into customer-side WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system has two helical racks that ensure robust, precise, and reliable vertical transport of the tray, even with eccentric loads. The SSI Logimat vertical lift module is used in many industries for the storage and retrieval of various goods: E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The application areas of vertical lift module systems are diverse: Small parts storage Article management Buffer storage for production Order fulfillment Storage and retrieval of maintenance and spare parts Storage of semi-finished products Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Vertical Lift Module Serial No. 916.0498-A4 Controller, Type PLC-EasyConnect Touch Display Height of vertical lift module: 6835 mm Width of vertical lift module / tray: 4570 mm / 4025 mm Depth of vertical lift module / tray: 3092 mm / 815 mm Load capacity machine 2x 25 t Number of levels / trays: 47 Load capacity per level / tray: 590 kg Size of storage locations adjustable Power supply: 400 V 50 Hz Nominal operating current: 24 A Maximum power consumption: 17 kVA Total weight of machine: 36 t Year of manufacture: 2016 Side walls missing The vertical lift modules are arranged in a block configuration, therefore the inner side walls are missing. The professional dismantling, valued at €5,000 (net), is already fully included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer vertical lift module! A vertical lift module is only as efficient as its internal layout. Our specially designed storage boxes utilize the tray area of your SSI Schäfer system (e.g., LogiMat) to the very last millimeter. The containers are available in three different sizes (S, M, L) and enable optimal use of the storage space in the lift system. Gsdpfeyllvtsx Akysbu Find the right dimensions for your system in our other auctions. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More vertical lift modules - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, SSI Schäfer Logimat SLL Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift designed for the efficient storage and retrieval of small parts using the goods-to-person principle. It is characterized by high storage density and ergonomic ease of operation. Functions and Benefits Goods-to-person principle: The system automatically brings the requested tray to the access opening, minimizing walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in very high storage density on a minimal footprint. Ergonomics: The access opening (LOGI Gate) can be positioned at different height levels to ensure ergonomic retrieval. Optionally, the reach depth into the tray can be further reduced, which reduces the strain on the operator. Software integration: The storage lift is equipped with a standard PLC control and can be integrated into customer-side WMS or ERP systems (such as SAP) via interfaces. The in-house software solution WAMAS® Logimat is also available. Robustness: The system has two helical rack and pinion drives, which ensure robust, precise and reliable vertical transport of the tray, even with eccentric loading. The SSI Logimat storage lift is used in many industries for the storage and retrieval of various goods: Godpfx Akjyllxzjyobu E-commerce Healthcare & Cosmetics Retail & Wholesale Industry Automotive The application areas of storage lift systems are diverse: Small parts storage Article management Buffer storage for production Order picking Storage and retrieval of maintenance and spare parts Storage of work in progress/semi-finished products Technical data Manufacturer: SSI Schäfer Type: SSI Logimat Type SLL Storage Lift Serial No. 916.0498-A2 Serial No. 916.0498-A3 Control, Type PLC-EasyConnect Touch Display Height storage lift: 6835 mm Width storage lifts / tray: 4570 mm / 4025 mm Depth storage lifts / tray: 3092 mm / 815 mm Load capacity machine 2x 25 t Number of levels/trays 43 Load capacity per level/tray 590 kg Size of storage locations adjustable Power supply: 400 V 50 Hz Nominal operating current: 24 A Max. power consumption: 17 kVA Total weight machine: 36 t Year of construction: 2016 Side walls missing The storage lifts are arranged in a block configuration, which is why the inner side walls are missing. The professional dismantling, valued at €5,000 (net), is already included in the price. Item location: 37308 Geisleden Enhance your SSI Schäfer storage lift! A storage lift is only as efficient as its internal organization. Our specially designed storage boxes utilize the tray area of your SSI Schäfer system (e.g., LogiMat) to the last millimeter. The containers are available in three different sizes (S, M, L) and enable optimal use of the storage space in the lift system. Find the right dimensions for your system in our other auctions. "One-stop shop: We are happy to offer you suitable bank financing for your project." More storage lifts – new and used – can be found in our shop! International shipping costs on request!

Operating hours: 43,927 h, condition: good (used), FOBA Laser FOBALAS 94S Nd:YAG laser marking system, marking laser FOBALAS F 94S laser marking system Laser type: FOBALAS 100 CW/Q-switch - Nd:YAG Power class 4 P max = 120 W 1.064 μm XY/2-100 HPM Type: Foba Gbedpfx Akew U Timjyeu Volts: 15 V Wavelength 1064 Operating hours: 43927 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF AgieCharmilles CUT 1000 Gedsz I Ni Sjpfx Akysbu Year of manufacture: 2018 Travel ranges (X/Y/Z): 220 x 160 x 100 mm Travel ranges (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.02 mm to 0.20 mm (including optional KIT F20) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, overhauled, and thoroughly tested by our specialists. We will gladly commission the machine at your facility and provide training on the control system and machine operation.

Condition: good (used), FOBA FD84S sensor for YAG laser marking systems For sale is a used FD84S sensor from the manufacturer FOBA. This sensor is intended for use in YAG laser marking systems. Technical details: Gsdpfxjxlq Exs Akyebu Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / laser control component Laser class (system application): 4 Wavelength: 1064 nm Laser power (system application): 70 W Pulse power: 10 kW Pulse duration: 70 ns Application area: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at affordable prices – Buy from the professional for the professional – You will find other attractive offers in our SHOP.

Condition: good (used), Horizon HCB-2 semi-automatic machine for producing hardcover books The machine is in very good condition, little used. The task of the machine is to produce a finished cover, assemble the book block into the cover and joint forming in the finished book. The machine is very easy to set up, operate and service. The machine is equipped with the following elements: touch control monitor table for mounting the cover with a laser pointer module for wrapping veneer edges ironing rollers Gjdpfx Aksz N Shnsyebu barcode scanner Technical data: – cover size: max. 680.6×340.8mm; min. 322.4 x 169.7 mm – spine thickness: min. 3mm; max. 25mm – cover weight range: 105 – 160 g/m2 – speed: max. 150 cycles/hour – dimensions: 1,800 x 1,050 x 1,536mm – weight: 456kg Power supply: 230 V / 50 Hz instruction manual included and a large set of materials. Ask About The Product

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. Gsdpfx Akjzdnlajysbu The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 1999, functionality: fully functional, Diosna spiral mixer SP 120 A with two bowls Telephone number: Export price: €14,500 Gbodpfsz N Hkqsx Akyeu

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, HEPA filter, filter cassette Gsdpsz N Hncsfx Akyjbu -Manufacturer: Filt Air, Air filter type GT4-13AE-YACO -Front frame dimensions: 1210 x 600 mm, see photo of the type plate -Connection: Ø 255 mm -Quantity: 1x air filter included -Dimensions: 1210/130/H600 mm -Weight: 16 kg

Condition: used, functionality: fully functional, overall weight: 2,100 kg, total length: 6,000 mm, total height: 2,400 mm, USED storage containers/sea containers, 6m long (20-foot) READY FOR USE, windproof and waterproof With valid CSC plate Wooden floor We offer you… Delivery including unloading possible for an extra charge a customized offer Desired paint finish Modification of the container according to your exact requirements All offered containers are in stock Gedpfx Aozh Rb Ejkyebu Other: • Dimensions & weights available upon request PLEASE CONTACT US

Year of construction: 1995, condition: ready for operation (used), A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible. Gsdpfx Akjw Exr Neyobu

Condition: excellent (used), Duplo DBM-500PRO + DBM-500T DBM-500PRO Bookletmaker - Maximum speed: Up to 5,000 booklets/hour, depending on paper and format - Minimum sheet size: 120 × 170 mm - Maximum sheet size: 356 × 508 mm - Sheet size with small-format kit: 105 × 297 mm - Booklet capacity: Up to 25 sheets / 100 pages, depending on paper - Side and corner stitching capacity: Up to 30 sheets of 80 gsm paper - Stitching heads: 2 Hohner heads - Functions: Saddle stitching and folding, side stitching, corner stitching and fold-only - Control: Touchscreen with 12 job memories - Automatic job changeover - Automatic fold roller gap adjustment - Dimensions (L × W × H): 1,610 × 700 × 1,005 mm - Weight: 412 kg - Power supply: 230 V / 50 Hz / 3.8 A DBM-500T Trimmer - Trimming function: Booklet fore-edge trimming - Untrimmed booklet size, spine to fore-edge: 85–250 mm - Untrimmed booklet size, head to foot: 120–356 mm - Finished booklet size, spine to fore-edge: 75–250 mm - Trimming margin: 1–25 mm - Trimming capacity: Equivalent to 50 layers of 81.4 gsm paper / 25 folded sheets - Speed: 4,500 A5 booklets/hour or 3,900 A4 booklets/hour with 10-sheet booklets using 81.4 gsm paper - Settings adjusted through the DBM-500 control panel - Dimensions (W × D × H): 635 × 700 × 1,094 mm - Weight: 241 kg - Power supply: 220–240 V / 50 Hz / 3.3 A Specifications may wary Gbjdpfxez Nwt As Akyou

Condition: used, functionality: fully functional, overall weight: 1,200 kg, - bowl capacity: ± 350 liters - bowl diameter, internal: 99 cm, external: 103 cm - bowl depth: 50 cm - bowl and mixing arm made of stainless steel - equipped with thermal motor overload protection - suitable for a maximum of 150 kg of flour - for bread dough: 240 kg of dough - (bowl capacity: ± 350 liters) - bowl diameter, internal: 99 cm, external: 104 cm - height to the bowl rim: 83 cm Godoz Imzrspfx Akysbu - automatic/hydraulic bowl locking system - equipped with a special stainless steel mixing arm for butter dough - or, optionally, with a new stainless steel kneading spiral - equipped with motor overload protection - bowl drive via roller drive - stainless steel/plastic dust cover - machine weight: 1200 kg, bowl carriage: 280 kg - motor power, kneading spiral: 14.1 kW - motor power, bowl drive: 1.1 kW - PLEASE NOTE! Without bowl carriage and AS IS.

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Gbedpfx Akjz Ixkxjyou Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works