Used Vetter Kran Drehkran Schwenkkran L 3,5M Demag 500Kg Kettenzug H 4M + Dübelplatte for sale (85,379)

Condition: used, Year of construction: 2009, Liebherr crane 160 HC-L 8/16 including remote control: 160 HC-L 8/16 height: 37.5 m, reach 55 m, serial no. 30349039 Year of manufacture: 2009 Incl. the following crane parts: 1 undercarriage cross 2 base ballast A 7.5 to 12 base ballast B 4.8 to 1 boom 611. 10.7m 1 boom 621 8m 2 booms 622 10.35m 1 boom 631 5.18m Hjdpfevx Eccox Ai Nonk 1 boom 641 tip 1 base tower 12.42m 5 tower section 4.14m "Completely repaired, sandblasted and repainted! This crane has been completely overhauled and is in excellent condition. Old paint and rust layers were thoroughly removed by sandblasting before a high-quality new coat of paint was applied. Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see Homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not represent an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Year of construction: 2015, condition: excellent (used), machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Hnjdewgwrqepfx Ai Nok Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: like new (used), 25 linear meters Pallet Racking Nedcon Brand new, see pictures! A top-quality racking system from the major manufacturer NEDCON—subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 3.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity: 3050 kg per level Hnedpjfi U Aisfx Ai Nek Negotiable price: €3,290,-- net ex stock Offer includes: + 10 pre-assembled frames, depth 110 cm, height 3.5 m + 36 beams, length 2.7 m, 3050 kg load capacity per level + 72 safety clips + 20 concrete anchors Load capacity signs, documents, etc. are of course included. You can find additional accessories in the accessories catalogue. Frames in blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m available from stock. Bay load capacity 12 tons, higher bay loads available on request. Beams in orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods available from stock. Transport and assembly available on request. Other configurations available on request. Over 2000 meters available. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5000 linear meters of pallet racking systems from various manufacturers in stock. (Specifications, details, and prices as well as prior sale subject to change and errors excepted! Please refer to our Terms and Conditions. All prices excl. VAT, ex stock.) Purchase / Sale: We are constantly looking for or offering a wide range of items from various sectors: - broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear out or dispose of goods for insolvency administrators. Write to us with a few details and we will get back to you promptly. To visit our website, please click on our logo!

Condition: excellent (used), Loos U-HD 4500kg/h 10Bar Hjdpeu I Rvdjfx Ai Njnk

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: F32/16, ABUS EHB overhead crane crane runway with cantilever supports Dimensions approx. 8.2m x 4.8m, payload / lifting load 1x 250 KG - 0.25to Technical data of the system: Crane runway made from ABUS HB180 rails Approximate dimensions as follows: External dimensions - space requirement approx. 8.2m x 4.8m with 1 bridge 250KG payload Hedpfxemi S A Ae Ai Nonk Top supports 4.05m Top rail 3.88m UK running rail 3.70m Upper bridge 3.62m UK bridge 3.46m Hook height 3.05m Track width 3.8m Internal dimensions of supports 4.46 m Rail length 8.2m Bridge length 4.4m Base plate of the support 50x50cm Support HEA180 Support spacing 7.88m All supports can be set up variably. The system is delivered complete: ABUS HB rails, trolleys, end plates, cable drag, holder/hanger, chain hoist with control bottle, 4x supports, etc. Crane is dismantled and available immediately Inspection book is available Item location is 75053 Gondelsheim Almost new condition, see pictures There are 10 different systems available, please ask for your size! Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve Hnjdoyz Tmyepfx Ai Nek

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... Hnedpjy A N D Rjfx Ai Nek We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. Hnedpfx Aiey A N A Tj Nsk - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Hnodpfxsy A H Sle Ai Nek Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: new, Approx. 14 running meters , H: 500 cm , Shelf load: 4500 kg , Pallet racking , Heavy duty racking , High bay racking , Industrial racking , Shelving Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 500 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 15 x 5 cm, T45. - 60 x safety pins. - Levels: Floor + 3 - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2940,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Hodpjy A H E Sjfx Ai Nenk Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2010, operating hours: 47,000 h, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Hedpsx E A Twjfx Ai Nsnk terms of payment: 100% prior to delivery

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Hnjdpfxofdkb Ue Ai Nek - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), I am offering a professional lifting chain sling from the renowned brand McBULL, designed for use in demanding industrial environments. This set is ideal for: cranes Hnsdpfx Aisyxtdye Nok gantry cranes forklifts construction and transport operations The equipment is fully functional, used – shows normal signs of wear with no damage affecting operation. ⚙️ Technical specifications chain diameter: 20 mm length: approx. 4 m working load limit: 12,500 kg 17,000 kg (depending on configuration) type: chain sling hooks: with safety latch manufacturer: McBULL condition: used, functional, tested ✅ Technical condition no cracks or deformation of chain links hooks functional, safety latches working correctly markings are clear ready for use 📦 Includes chain sling(s) as shown in the photos hooks with safety latch

Condition: used, mileage: 157,285 km, power: 132 kW (179.47 HP), first registration: 11/2005, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro4, total length: 8,300 mm, total width: 2,360 mm, total height: 3,600 mm, Equipment: crane, soot filter, MAN 8.180 Roofer's Crane Klaas K26-24TS with Work Basket 34m Suspension: leaf-leaf Wheelbase: 4.00 m KLAAS roofer’s crane Type: K26 - 34TS Material: aluminium Operating hours: 2200 h 6x hydraulic extensions 4x hydraulic support points 1x remote control and manual control 1x cable winch 1x tipping bucket 1x tile clamp Features: - Engine brake Hedpfxoyx Nvle Ai Nenk - Tachograph disk - Radio cassette - Sun visor - Ball hitch with power connection We are happy to support you with financing/leasing together with our partners. All information provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 11,450 h, * Liebherr LC 926 with approx. 11,450 operating hours – single-owner – German machine * Adjustable boom – quick coupler – hammer line – demolition cab * Slewing ring is cracked and must be replaced * Excavator is currently operational * Overall width: 2,950 mm – overall weight: 29,300 kg Hnjdpsyxbx Sefx Ai Nok * Regularly serviced – German machine – single-owner – 130 kW engine * Viewing by appointment only * Contact: Mr. Andreas Vogel * Information provided online is non-binding. * They do not constitute guaranteed characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to change, error, and prior sale.

Condition: new, functionality: fully functional, Batch of various remote control models available. See photos. For each product it varies whether it is new or used. Can be purchased individually or as a lot. For price information per product, please send a message. We have multiple units of everything in stock. Hnedpfjywyyxjx Ai Nok

Condition: new, Bottom blocks / crane hooks / hooks – 53 pieces: Bottom block – 40 tons for DH / DR / DMR (price and photos on request) Hnodpfx Aioyvvbco Njk Bottom block – 32 tons for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 tons – (1 piece). 2. Bottom block – 12.5 tons – (1 piece). 3. Bottom block – 12.5 tons (without hook safety latch) – (1 piece). 4. Bottom block – 10 tons – (2 pieces). 5. Bottom block – 6.3 tons – (1 piece). 6. Bottom block – 12 / 10 tons / 6.3 tons / 3.2 tons / 2.5 tons – (3 pieces). 7. Bottom block – 5 tons / 3.2 tons – (2 pieces). 8. Bottom block – 4 tons (2 pieces, unused with storage marks). 9. Bottom block – 3.2 tons (2 pieces, used). 10. Bottom block – 2.5 tons, without hook (2 pieces). 11. Hook for chain hoists – 2 / 2.5 tons (1 piece). Abus bottom block / hooks: 1. Abus bottom block – 30 tons (used). 2. Abus bottom block – 12.5 tons (new, without hook safety latch). Konecranes bottom block – 5 tons (used). Hook – 150 tons (2 pieces, new). Hook – 40 tons (1 piece, new). Hook size no. – 2.5 (1 piece). Hook – 15 pieces. Hook – 12 pieces. Hook – 15 pieces.

Condition: excellent (used), DEMAG / ABUS / STAHL / KONECRANES / SCHNEIDER / TELEMECANIQUE – Pendant control stations / Pendant pushbutton stations / Empty enclosures: DEMAG Pendant Control Station / Pendant Pushbutton Station: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). Hnedpfxjyvuakj Ai Nek 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Control Station / Pendant Pushbutton Station: 1. Type: 70268 – 2 units (new). 2. Control cable Type: SC15X1 L., 2000 mm – 2 units (new). STAHL Pendant Control Station / Pendant Pushbutton Station: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). KONECRANES – 1 unit (new). SCHNEIDER Pendant Control Station / Pendant Pushbutton Station: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control Station / Empty Enclosures: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). ROTARY SWITCH – pushbutton – 1 unit (original packaging).

Condition: excellent (used), For sale: a complete crane workstation consisting of two robust VETTER slewing jib cranes and a STAR LIFTKET electric chain hoist. The entire set is in excellent technical condition, ready for immediate use in a workshop, warehouse, or production hall. 1. VETTER Slewing Jib Crane (Year of manufacture: 1984) – Lifting capacity: 1,000 kg – Manufacturer: VETTER Fördertechnik, Germany – Model: G – Heavy-duty industrial design – Nameplates and torque setting instructions in accordance with DIN standards 2. Slewing Jib Crane – Specifications – Working height: approx. 460 cm – Total height: approx. 505 cm – Arm working radius: approx. 575 cm – Arm total reach: approx. 632 cm – Secure mounting to floor/construction 3. STAR LIFTKET Chain Hoist – Lifting capacity: 650 kg – Chain diameter: 7.2 mm – 2 falls – Lifting speed: 5.1 / 2.5 m/min – Power supply: 3~ 400V / 50Hz / 420V – Power: 0.9 / 1.2 kW – Year of manufacture: 2008 – Included: pendant control (up/down) with emergency STOP, trolley, and complete wiring/installation Condition: Devices are fully functional, regularly serviced (last UVV inspection visible on the nameplate). Mechanically in very good condition, ready for immediate installation and operation. Hodpfx Aiow Rc I Ro Nenk Manufactured: 100% Made in Germany – high durability and reliability.

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction • Manual slewing • Complete with trolley and cables ——— Hnjdpew Rddyjfx Ai Nsk - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm Hnodpfxouch Rfj Ai Nsk - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: MING11, carrying capacity per cantilever arm: 1,000 kg, shelf height: 3,000 mm, total length: 18,000 mm, total width: 2,000 mm, total height: 3,000 mm, axle spacing: 1,500 mm, load capacity per stand: 7,000 kg, shelf length: 21,000 mm, throat depth: 900 mm, overall weight: 6,000 kg, Equipment: double-sided, Cantilever racking, long goods racking, heavy-duty racking - double-sided Consists of 13 uprights + 52 cantilever arms Height 3m - uprights IPE200 - upright spacing 1.5m center-to-center Total depth 2m (both sides) Arms 90cm - IPE100 Load capacity per outrigger 1000kg Upright load capacity 7000kg Arms are continuously adjustable Hnodov Smr Sepfx Ai Nek Including crossbars from arm to arm, including wooden inserts Very good condition, see pictures Forklift available for loading Pickup only by appointment in 75053 Gondelsheim Shipping via freight forwarder is possible, please inquire with your zip code

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Hnedpfx Aeyguk Aei Nok Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). Hnjdpfxjyguhho Ai Nsk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Year of construction: 1976, condition: used, machine/vehicle number: TH20010161, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 10t - 10000KG, track 11750mm Outer dimensions with head carriage approx. 12000mm Hodpfx Asv A Sa Nsi Nsnk with steel hoist and floor control Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 3500mm Lifting height of rope hoist 10000mm Crane weight approx. 4000KG incl. 2x 25m guide rails HEB280, incl. conductor rails!!! Beam lengths per side: 1x approx. 10m 1x approx. 15m Support spacing 10m/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred