Used Traub Tnc 42/65 for sale (12,027)

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Temperature test specifications: Temperature range: -42°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Crodpoziypnsfx Ailjd Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Climatic test specifications: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1% to ± 3% r.h. Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are checked and carried out on all our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If needed, fresh filling with legally compliant refrigerant 3. Leak check with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Subject to prior sale, changes and errors in technical data and specifications reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Crjdpfxsziyb Re Ailsd Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Syntec control system, Spindle bore 42 mm, 9 driven tools, Counter spindle, Part collector, Chip conveyor, Codpfx Aisziwqijlerd Loading magazine 3 m.

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Year: 2009 new spindle: 2026 SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Crjdpfx Aezi Dz Ioilsd Caliper: Renishaw Tool setter: Blumlaser 3D Quickset Electronical handwheel New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas Cedpfsvyli Eex Ailerd turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders (see picture) 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: used, Year of construction: 1987, pressure 65 t distance between columns 930 mm stroke 1100 mm distance table/ram, stroke up 1300 mm table surface area 1340x1084 mm hole in the table 604 x 404 mm table height over floor 1000 mm side window 705 mm ram surface 1230 x 990 mm speed down 620 mm/s speed up 207 mm/s working speed 320 mm/s oil volume 450 l power requirement 15,5 kW weight 8,0 t dimensions (WxDxH) 2,8 x 2,6 x 4,85 m Csdpfjvuk Szox Ailsrd SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet Crjdpfx Aieziny Ijlsd - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction Crjdpezill Uefx Ailjd * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,205 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 65 MonoBlock was manufactured in 2011. It features impressive X, Y, and Z travels of 735 mm, 650 mm, and 560 mm respectively, along with a spindle speed of 18,000 rpm. The machine is equipped with a tool changer that has 30 magazine positions and utilizes a Heidenhain iTNC 530 control type. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 MonoBlock vertical machining centre we have for sale. Contact us for further details. Crsdpfx Aozidqcoiled

Condition: good (used), Year of construction: 1995, - Max. turning diameter: 160 mm - Max. bar diameter: 65 mm - 2 x tool slides, travel 70 mm - 2 x cross slides, travel 70 mm - 8-position turret, non-powered - Max. main spindle speed: 7,500 rpm - Chip conveyor Accessories - Bar feeder IEMCA TAL 65/32 Crodpfxjzidcrj Ailed Dimensions (L x W x H): - Machine with chip conveyor: 4200 x 1385 x 1800 mm - Bar feeder: 4000 x 800 x 1400 mm Total weight: 6,500 kg

Condition: used, Year of construction: 1998, OVERVIEW This ABC 4HA-4-LT high-pressure reciprocating air compressor, manufactured in 1998, is designed for the supply of compressed air in PET bottle blowing applications. The compressor is manufactured by ABC – Arizaga, Bastarrica y Cía S.A. from Eibar, Spain. The machine is a 4-stage reciprocating compressor with oil-free cylinder compression design and a nominal pressure of 42 bar. It is belt-driven. The compressor is mounted on a structural steel skid and includes interstage piping, pressure monitoring, cooling water connections, main drive motor, belt-drive safety guard and integrated control cabinet. The machine is equipped with an analog pressure gauge panel showing the final stage, intermediate stages and oil pressure. The control cabinet is fitted with status lamps for temperature, water, oil, thermal relay and dryer fault indications, as well as an hour meter and emergency stop.   TECHNICAL DATA - Manufacturer: ABC – Arizaga, Bastarrica y Cía S.A. - Manufacturer Location: Eibar, Spain - Model / Type: 4HA-4-LT - Machine Type: High-pressure reciprocating air compressor - Year of Manufacture: 1998 - Application: High-pressure compressed air supply for PET bottle blowing - Compression Design: Oil-free cylinder compression - Number of Compression Stages: 4 stages - Nominal Pressure: 42 bar - Regulation Air Pressure: 8 bar - Suction Pressure: Not specified - Flow Rate: approx. 546.9 m³/h - Compressor Speed: 725 rpm - Motor Power: 150 CV / 110 kW - Total Power to Install: 158 HP / 115 kW - Transmission: Belt-driven - Power Voltage: 380 V - Control Voltage: 220 V - Frequency: 50 Hz - Cylinder Diameter, 1st Stage: 250 mm - Cylinder Diameter, 2nd Stage: 160 mm - Cylinder Diameter, 3rd Stage: 105 mm - Cylinder Diameter, 4th Stage: 75 mm - Piston Stroke: 150 mm Csdoziawrspfx Ailord - Cooling System: Water-cooled - Cooling Water Flow Rate: approx. 6.5 m³/h - Ambient Temperature Range: 0 – 40°C - Cooling Water Temperature Range: 5 – 40°C - Compressor Weight: approx. 2,900 kg - Motor Weight: approx. 830 kg - Complete Equipment Weight: approx. 7,230 kg - Pressure Gauges Observed:Final stage: approx. 42 bar 3rd stage: approx. 16 bar 2nd stage: approx. 6 bar 1st stage: approx. 2 bar Oil pressure: approx. 3.5 bar - Control Cabinet: Integrated electrical control cabinet, marked T2/7 - Operator Elements: Status lamps, analog hour meter and emergency stop - Status Indications: Temperature, water, oil, thermal relay and dryer fault - Safety Equipment: Belt-drive / flywheel safety guard and emergency stop - Construction: Green painted multi-stage compressor on structural steel skid - Additional Equipment Observed: Interstage header pipework, vertical separator / receiver vessel and overhead piping - Certification: CE-marked - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2008, operating hours: 11,507 h, lifting height: 4,040 mm, fuel type: diesel, mast type: duplex, fork length: 1,100 mm, fork width: 1,150 mm, total height: 2,690 mm, total length: 3,000 mm, total width: 1,450 mm, color: orange, Empty weight: 6.900 kg Lifting capacity: 4.000 kg - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30419 - Operating hours: 11507 - Lifting capacity: 4000kg - Lifting height: 4040mm Cedezh U Ucjpfx Ailerd - Overhead clearance: 2690mm - Fork length: 1100mm - Maximum fork width: 1150mm - Minimum fork width: 790mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3000mm x 1450mm x 2690mm (l x w x h) - Transport weight [kg]: 6900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, Knoll TG50-42/55480 centrifugal pump, 200523114, serial number: 268828, with AM 112M BA2 motor, serial number: 424615, unused, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Cjdszh Scqopfx Ailsrd

Condition: new, Knoll TG50-42/55480 pump, serial number 200921578, SN: 413462, with AM 112M BA2 engine, serial number: 644637, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request separate quotes for packaging and shipping costs! Csdpozh Scwofx Ailord

Condition: good (used), Year of construction: 2007, operating hours: 49,000 h, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Csdpjxdih Nsfx Ailsrd All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, Crjdpfx Ajzh Nczjiljd through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW Crsdpfx Aiehvan Ioljd scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,400 h, load capacity: 4,500 kg, lifting height: 3,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: TOYOTA, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,100 mm, fork length: 1,400 mm, fork width: 130 mm, fork thickness: 60 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 300-15, rear tire type: superelastic tires (black), rear tire size: 7.00-12, overall weight: 12,176 kg, empty load weight: 7,676 kg, total height: 2,300 mm, total length: 3,050 mm, total width: 1,400 mm, color: yellow, Equipment: cabin, lighting, pallet forks, trailer coupling, 🔍 Looking for a Reliable Forklift? We Are Industry Experts! We specialize in selling high-quality forklifts, offering tested machines in excellent condition. ✅ Check out our offer and find the perfect equipment for your business! 🚜💼 🔥 In this listing, we present: 🚀 COUNTERBALANCE FORKLIFT - TOYOTA - 42-4FD40 - DUPLEX 3700mm 📏 - Year 2011 🏷️ - 6117MTH ⏳ - DIESEL ⛽ - CONDITION 5/5 🌟 This forklift is in excellent technical condition, ready for immediate use. ⚙️🔧 📌 Key Features and Technical Data: 📍 Model: TOYOTA 42-4FD40 Csdpfxezi E Euo Ailord 📍 Year of manufacture: 2011 🏗️ 📍 Lifting capacity: 4500 kg 🏋️‍♂️ 📍 Operating hours: 6117 MTH ⏱️ 📍 Mast type: Duplex 🚜 📍 Lifting height: 3700 mm 📏 📍 Drive type: Diesel ⛽ 📍 Load center: 600 mm 🎯 📍 Engine manufacturer: Toyota ⚙️ 📍 Power: 75 HP 🔥 📍 Total weight: 7676 kg ⚖️ 📍 Tires: Solid, Superelastic, in good condition 🛞 📍 Front tires: Superelastic - 300-15 - 50% tread 🔄 📍 Rear tire: Superelastic - 7.00-12 - 50% tread 🔄 📍 Overall height (collapsed mast): 2500 mm 📐 📍 Technical condition: Fault-free, after a service inspection 🛠️ 📍 Visual condition: Very good 👌 📍 Fork length: 1400 mm 🔩 📍 Overall height: 2300 mm 📊 📍 Total length: 3050 mm 📏 📍 Total width: 1400 mm 📐 📍 Positioner width: 1100 mm 🔧 🎯 Equipment Included: 💡Lighting 🔧 Adjustable boom 🦾 Pallet forks This forklift is the perfect solution for industries that require efficient transport of heavy loads in demanding environments, such as construction 🏗️, logistics 🚛, and manufacturing 🏭. Thanks to its powerful diesel engine ⛽, it provides high performance, durability, and reliability, making it ideal for both indoor warehouses 🏢 and outdoor operations 🌳. 🚀 Additional Features: ✔ Strong and efficient diesel engine 🔥 for demanding applications ✔ Comfortable operator cabin 🛋️ with ergonomic controls ✔ High reliability in intensive use 🔝 ✔ Excellent performance on rough terrain and in outdoor conditions 🌍 Designed for heavy-duty operations, this forklift ensures precise maneuvering, high lifting capacity, and optimal warehouse efficiency 📦. 🛠️ Condition: ✅ Fully functional ✅ Regularly serviced ✅ Ready for immediate work! 🚛💨 📦 We offer transport across Europe 🌍 and provide a FREE initial inspection 🆓! 💰 Pricing & Formalities: 💳 We provide full support for financing options, including quick leasing and credit approvals 💰, even for new businesses 🚀 or companies in challenging financial situations. ✔ Leasing decision in just 2 hours! ⏳ ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & start-up program for new businesses 🚀 ✔ We are an authorized supplier for most leasing companies 🏦 ⚡ FAST / SIMPLE / AFFORDABLE FINANCING 💼

Condition: good (used), Year of construction: 2022, operating hours: 2,280 h, mast type: telescopic, fuel type: diesel, Year of manufacture: 2022 Drive: Track GVW: 13.000 kg Lifting capacity: 454 kg Working height: 2.180 cm CE mark: yes Technical condition: very good Visual appearance: good Genie S-65 XC TraX – Year 2022 | 2,250 Operating Hours | 230V Platform Power | Hydraulic Generator | 2.40 m Platform For sale: a very well-maintained Genie S-65 XC TraX from 2022 with 2,250 operating hours. This powerful telescopic boom lift from the XC (Extra Capacity) range is equipped with the TraX track system, providing outstanding performance on soft, muddy and rough terrain. With a working height of approximately 21.8 metres and a horizontal outreach of approximately 17.1 metres, this machine is ideal for construction, industrial maintenance and installation work. The high-capacity XC platform allows operators to safely carry additional tools and materials, increasing productivity. This machine is fully equipped with a 230V power supply in the platform, a hydraulic power unit for operating hydraulic tools, and an extra-wide 2.40 metre platform, offering maximum efficiency and working comfort. Key Features: Year: 2022 2,250 operating hours Working height: approx. 21.8 m Horizontal outreach: approx. 17.1 m XC (Extra Capacity) model TraX tracked undercarriage 230V power supply in platform Hydraulic power unit Extra-wide 2.40 m platform Crsdpozi Elbjfx Ailjd High platform capacity Well maintained Ready for immediate use A fully equipped, high-performance telescopic boom lift designed for professionals who demand maximum capability in all working conditions. Contact us for more information or to arrange a viewing.

Condition: like new (used), Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! Crodpfsx E Dncox Ailed CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending radius (min.): 90 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program Cedpfx Aozi Aiwjilsrd  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: used, Year of construction: 1991, functionality: fully functional, Hot water circulation pump Csdszix A Tepfx Ailord KSB Type ETANORM 6-65-250 Capacity 90 m³/h

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz Credpfsv Uh Ndjx Ailjd - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter • 1 set of soft jaws for SMW 175-BBD Codpjzhkl Djfx Ailord • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump acity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgIEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetAdded options:I-V50011 Collet chuck Type "MPF 65/140" without axial feed for main spindle max. diameter: mping elements and other equipment:I-V50025 Manual collet changer type "SACO MPT65/140 and MPF65/140"I-V50092 Differential pressure for counterspindle, possibility of setting two different clamping pressures.I-V50083 1 set of soft jaws for chuck type "SMW 175-BBD"I-V50080 Chuck type "SMW 175-BBD" For counter spindle, including adapter for adapting the spindleI-V60050 Tool holder for drilling tools with internal cooling and cylindrical shank Ø 32mm,with clamping shank according to DIN 69880 (VDI 30) - 4pcsI-V60010 Radial tool holder for external machining type C1 with clamping shank according to DIN 69880 (VDI 30) - 5pcsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 colletsVarious new spare parts are included. Crodpfozhklwjx Ailed Technical Specification Counter Spindle Yes Driven Tools Yes