Used Systemtechnik Hölzer Las 22 Laserbeschrifter - Tischmodell for sale (11,806)

Condition: used, functionality: fully functional, SECOND-HAND MITRE SAW FOR IRON RAIM 22 Dwodpsx Rrltsfx Albjb

Condition: ready for operation (used), HAGEN & GOEBEL / Internal thread cutting machine -Type HG 22 EB Dwsdpszu Nzwofx Albeb -Speed range 180 - 1120 rpm -Thread size up to max. M22 / steel -Thread size / cast iron up to max. M 27 -Thread size aluminum / brass max. M 33 -Smallest thread size M6 -Single stroke / continuous stroke -Table dimensions 600x500mm Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1000 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Auction of a fully demountable, multifunctional commercial hall! TECHNICAL DETAILS Dimensions Hall 1: Width: 22 m Length: 70 m Height: 6 m Dwjdjx T Dgzjpfx Albob Dimensions Hall 2: Width: 23 m Length: 20 m Height: 6 m Roof insulation: EPS approx. 100 mm FEATURES 3 doors & gates Walls: Interior chambered sections filled with insulation bags, cladded with steel trapezoidal profile sheets Steel deck profile sheet roof Secondary steel structure: steel frames and columns Purlins Wind bracing for structural rigidity Note: Approximately 4 trucks are required for transport. The roof sections have a transport length of around 10–15 meters. For the longest components, a truck with an 18-meter loading length will likely be needed.

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Dwjdpfx Ajzlqavolbsb

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 4,946 h, functionality: not functional, machine/vehicle number: 2406.03, turning diameter over cross slide: 150 mm, turning length: 625 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 4,000 rpm, total length: 1,650 mm, total width: 1,450 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 2,200 kg, spindle diameter: 320 mm, distance between centers: 750 mm, Universal lathe with cycle control from DMT - CD 322 The power supply unit for the drives is defective. In addition, the turret is damaged and has been removed from the machine parameters. This will be included. Dwodpfx Aszwpq Dolbob Therefore, after the power supply unit has been repaired, the machine can be operated without the turret. However, due to the age of the machine, the guideways also exhibit corresponding play. Therefore, the machine is sold expressly as defective, for repair or as a source of spare parts, with the exclusion of any warranty regarding functionality.

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 24 station turret, 15kW spindle motor, milling 6000rpm, Dodpezzwgnofx Albjwb C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control system - Operating hours: approx. 15,933 h - Load hours: approx. 7,654 h - Operating pressure: 11 bar - Delivery rate: 1.67 m³/min - Drive: 400 V / 11 kW - Space requirement: approx. W 780 x H 1030 x D 850 mm - Weight: approx. 300 kg - Compressed air tank Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume: 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant: R134 A Dsdpfx Ajzg Uh Tjlbjwb - Cooling air flow: 150 m³/h - Oil-water separator

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Technical specifications: • Max. size: 330 x 250 mm • Min. size: 200 x 148 mm • Max. trimmed size: 330 x 250 mm • Max. trimmed size without lap: 340 x 260 mm • Booklet thickness: 4–6 mm • Mechanical speed: max. 22,000 cycles/hour Equipment: Feeding & gathering: - 2 bundle clamps - 6 stations gathering chain - 5 feeders 416 - 5 Stream feeders 3738 with extensions - 1 Semko - 3 ELTEX static control devices Stitching unit: - Type 410 - 2 stitching heads Trimming: - Three-knife trimmer 304 Controls: Signature reading system (ASIR) Option not included in the price - Extra feeders - Stream feeders - Card gluers 423 - Inserter - stackers Dwodpfxozbulvj Albjb CONDITION OF THE MACHINE, cleaned, good working condition

Condition: used, mileage: 259,028 km, power: 177 kW (240.65 HP), first registration: 10/2019, fuel type: diesel, tire size: 285/70r19.5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2019, Equipment: tail-lift, Tire size: 285/70R19.5 Brakes: Disc brakes Dsdpfxezzz Ntj Albjwb Front axle: Steered; tire tread depth left: 8 mm; tire tread depth right: 8 mm; suspension: leaf spring suspension Rear axle: Double tires; tire tread depth left inner: 9 mm; tire tread depth left outer: 9 mm; tire tread depth right inner: 9 mm; tire tread depth right outer: 9 mm; suspension: air suspension Damage: none

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Dwedpozxzagofx Albeb Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: good (used), mileage: 247,614 km, power: 163 kW (221.62 HP), first registration: 04/2004, fuel type: diesel, tire size: 295 / 60 / R22.5, axle configuration: 6x2, wheelbase: 5,670 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: air, number of seats: 2, total length: 9,450 mm, total width: 2,550 mm, total height: 3,800 mm, permissible axle load (axle 1): 6,700 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 6,700 kg, loading space length: 7,360 mm, loading space width: 2,410 mm, loading space height: 2,210 mm, Year of construction: 2004, Equipment: ABS, electric window regulation, power mirror, tail-lift, Technical information Number of cylinders: 6 Engine capacity: 5.480 cc Transmission Transmission: Volvo, 6 gears, Manual gearbox Axle configuration Tyre size: 295 / 60 / R22.5 Make axles: Volvo Brakes: disc brakes Suspension: air suspension Front axle: Max. axle load: 6700 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60%; Reduction: single reduction Rear axle 2: Max. axle load: 6700 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 9.429 kg Carrying capacity: 12.071 kg GVW: 21.500 kg Functional Tail lift: Zepro, tail lift Make of bodywork: Becx Carrosserie Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = Dwjdpfxjzzyc Es Albjb - 12 volt socket - Radio/CD player - Speed limiter - Stability control - Visor

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Dwjdszzm N Eopfx Albjb Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection).

Condition: ready for operation (used), JUNG D22 Internal cylindrical & surface grinding machine - Machine suitable for internal cylindrical and surface grinding - Smallest bore to be ground: 14 mm - Largest bore that can be ground: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece speeds: 46 - 270 rpm - Spindle head / Swivels to the right and left, each by 30 degrees - Distance from the spindle axis to the center of the table: 250 mm - Largest distance / Workpiece spindle - grinding support: 935 mm - Work table / Tilts forward/backward, each by 5 degrees - Automatic and manual operation - Steady rest - Three-jaw chuck Dwodjztl Rrepfx Albjb - Replacement grinding spindles (see photos) - Coolant system Dimensions: L x W x H 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Dodpfxsgmfa As Albewb Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Dodew Nyfwjpfx Albswb Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 1986, used, good condition, low hours Brand: Weinig Model: P22N Year of manufacture: 1986 Machine no.: 226-670 Number of spindles: 4 Spindle arrangement: bottom - right - left - top Motor power kW: 4.0 - 7.5 4.0 Motor brakes Planing width approx. mm: 220 Planing height approx. mm: 120 Spindle diameter mm: 40 Table length approx. mm: 2,000 Pre-cutter Cardan feed Lateral pressure rollers Protective hood Infeed before the jointer Infinitely variable feed speed 4 - 20 m/min Profiling Sliding rollers: 1 piece Electric adjustment: thicknessing shaft Digital displays: width-height Extraction connection mm: 120/120/120/140 Space requirement approx. 3600 x 1400 x 1400 mm Weight approx. 1,500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition, as inspected, Dsdpfx Asy Apfzslbewb without any warranty or guarantee

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Djdpfx Alozuz Hljbowb Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Djdpfxezyl T Ts Albswb Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Dwjdpfxjy Hcd So Albeb Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x Videojet Laser Marking Systems for date/batch coding and marking with 1 x AD Oracle laser fume extraction system. Date of manufacture - 2019. The marking of the product surface is performed by the effect of intense laser radiation on the product material. The laser beam is focussed onto the product surface and heats up the topmost layer of the material, which causes a color change or a vaporization of the topmost dye layer. Dedszyu Igopfx Albewb Laser Marking System model – 3340 IP54 LASER MARKING SYSTEM. Laser Marking System serial numbers - V1098/498 and V1908/499. Laser Marking System electrical requirements - 100-240 V / 50-60 hz / 1 phase. Fume extraction system model - AD Oracle. Fume extraction system serial number - 50067797003. Fume extraction system electrical requirements - 115-230 V / 50-60 hz - 1 phase.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Dwedpfx Asv Rpxlslbob If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Dwjdow Nygnepfx Albeb Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Dwsdpfx Alevtgaxjbeb

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm Djdpoxw Ukvefx Albswb # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Dwjdpfjzzci Ujx Albeb Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device