Used Stop-Choc M16 for sale (7,855)

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 72164xxx, The Moba maxipacks Worldwide, the Moba maxipack M16 and M22 are the only machines that are able to package entire chickens in a bag, both frozen and fresh. The maxipack is an extremely reliable machine. Therefore, these machines are well-known in the chicken slaughtering industry for decades. The maxipack is made of stainless steel and high-quality, wear-resistant plastics. These ensure that the maxipack is able to continue to run for years in the production process after extensive mechanical, electrical and electronic revision. Moba M16 The Moba M16 taper machine is, suitable packing smaller chickens with a range of 900 to 1200 grams per chicken. - The machine consists of four protective covers with an interlock system that immediately deposits the machine when opened. In combination with the emergency stop, this ensures that the machine is safe to use. - Plastic bags can be easily changed by using the change function. This function ensures that the turntable rotates a quarter turn to ensure enough space to change the bags. - The compressed air system on this Maxipack is adjustable by means of a pressure reducing valve. The pressure reducing valve ensures that the moisture is filtered out of the compressed air. - The maxipack is also equipped with a pressure regulator, that ensures the maxipack to switch off if the pressure drops below 5 bar. Revision Moba M16 Maxipacks that arrive at Bos Technical Support are thoroughly cleaned before starting the revision. For the revision, original Moba high qualitiy components are used. Each maxipack is equipped with a new PLC (Program Logic Controller) that includes the latest software. The 8 pneumatic cylinders that this machine includes are all checked and replaced when necessary. The electrical cabinet is being rebuilt and provided with new wiring. All machines come with an instruction manual and will be extensively tested to determine whether the machine is ready for a prolonged period of time in the production proces. More information? Fjdpsh Ri A Aefx Ad Ijgd We have multiple Moba M16 and M22 machines in stock for sale and rental. For more information see also our website Specifications Moba Maxipack M22 taper: - Capacity: 800 chickens/hour (per machine) - Tape: 9-12 mm wide (optional 19 mm tape) - Machine weight: 540 kg - Machine size (L-W-H): 2395-850-1700 cm - Weight range: 900-1200 grams - Electrical 3 phase, neutral and ground - Voltage: 400 V - Power consumption: 1.4 KVA/hour - Frequency: 50/60 Hz - Airpressure: 6 bar - Maximum dewpoint: 3 Celsius - Air consumption: 7500 L/hour Bos Technical Support import-export packaging machines. Sorteermachine eier verpakkingsmachine eiersorteermachine egg gradingmachine sortiermachine sortieranlage eierverpackungsmachine Maxipack, Moba, Sanovo, Staalkat, Prinzen, Rational, Kletec

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Fodpet Eabiofx Ad Iogd Clamping table with grooves Type: FL-WB

Condition: new, impact length 2000 mm Fsdpfx Adovkiw Io Ijgd Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 73 kg length in width 620 mm length in total 2400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, impact length 3000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 117 kg Fgodpovkivqefx Ad Ijd length in width 620 mm length in total 3400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length.

Condition: new, impact length 4000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 137 kg length in width 620 mm length in total 4400 mm Roller conveyors including stop system. Stable execution. Fedpovkiv Rsfx Ad Ijgd are available from 2 to 6 meters in length.

Condition: new, measuring length bis 2000 mm Tube length 2280 mm Fodpfxevkiwzo Ad Iogd numbers of toolholders 3 Rohr galvanisch Verzinkt dimensions 2,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: new, thread dia. M3 - M16 metrisch 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Includes connection for cutting oil supply! Adjustable angle. Quick-change chuck with slip clutch. Display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Documentation in English! Fgjdpst Eahpjfx Ad Iod Optional: Tiller table type: FL-WB

Condition: new, load capacity: 1,600 kg, lifting height: 4,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 400 Ah, battery voltage: 48 V, fork length: 1,220 mm, front tire type: cushion tires (non-marking), empty load weight: 3,240 kg, Equipment: CE marking, sideshift, TECHNICAL SPECIFICATIONS - 1.6 Tonnes Fjdpfjmxkf Asx Ad Ijgd - Fuel: Electric - Model: 3W - Fork length: 1220 mm - Mast: Triplex 4.8m Full Free - Specs Tank / Battery: 48V / 400Ah AVAILABLE OPTIONS - Side Shift - Non-marking tyres - OPS System - Charger - Suspended seat Available from stock

Condition: new, Year of construction: 2025, functionality: fully functional, Exenso Comfort Automatic Length Stop • For use on cross-cut saws, drilling machines, punching presses, and more • Automatic positioning of the material stop • Stop and pusher modes available • Network-capable control unit with numerous software options and interfaces Fjdpfx Asxmh Uyjd Ijgd Ideal as an add-on to customer-owned saws or as a component in complete saw systems. Different adjustment lengths available – short delivery times! Customizable interfaces and software extensions possible. Contact us!

Condition: new, 2000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 800 kg height adjustment 650 - 950 mm weight of the machine ca. 0,045 t dimensions 2,07 x 0,48 x 0,21 m Simple roller conveyor with 2000mm length. Fgedpsupxuiefx Ad Ijd

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm Fjdpfefv Attjx Ad Iogd roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: new, thread dia. M3 - M16 mm Fodpfod Iinmex Ad Ijgd max. 187 U/min. working area 180 - 1000 mm engine output 0,7 kW weight 22 kg

Condition: new, impact length 6000 mm Weight of Material maxium 300 Kg/m Wheel width 350 mm roll diameter 60 mm work height adjustable 840 - 950 mm weight 195 kg length in width 620 mm length in total 6400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. Fgodpfevkivwox Ad Ijd

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Fgedpfx Adexdcylo Iod Length: 400 – 12.000 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 808 h, functionality: fully functional, machine/vehicle number: P20512, turning length: 200 mm, spindle speed (max.): 12,000 rpm, turning diameter: 16 mm, counter spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 36, Automatic lathe with only 808 spindle hours! Equipped with bar feeder and additional accessories! TECHNICAL DETAILS Max. turning diameter: 16 mm Max. turning length: 200 mm Max. drilling diameter: 10 mm Max. drilling diameter counter spindle: 8 mm Main spindle max. speed: 12,000 rpm Counter spindle max. speed: 12,000 rpm Spindle bore: 20 mm Tool size: 10 mm Main spindle tool holder: FC261-M Counter spindle tool holder: WF0660-M Tool stations: 36 Rapid traverse: Rapid traverse all axes (except X2, Y2, Y3 & B): 32 m/min Rapid traverse X2 axis: 16 m/min Fsdpjw Raxmsfx Ad Iegd Rapid traverse Y2 axis: 8 m/min Rapid traverse Y3 axis: 32 m/min MACHINE DETAILS Weight: 2,950 kg Operating hours Spindle hours: 808 h Power-on hours: 2,635 h EQUIPMENT Mueller CL1 high-pressure pump FOX WS 2-1000 mist separator Minimag 20 bar feeder Microconic MASA ultra-precision collet for the counter spindle Note: The machine has minor sheet metal damage, but only the outer covers are affected (see photos). The machine is fully operational.

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: Fgjdpfx Adjy Hkgbo Isd External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Fsdey Hkd Hopfx Ad Isgd Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Fgjdpfxezhkfqj Ad Isd Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Fsdpfxszf Ibke Ad Iegd Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Fedpfey H Hk Asx Ad Iogd Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph Fgodpfx Aeuqcnced Ied

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x double-stop brake roller, new Roller material: Polyamide wheel Plain bearing with bearing marks Roller material color: cream white Material color frame: galvanized Total height: 135 mm Castor Ø: 100 mm Castor width 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Fgjdpfx Adsrtplns Ijd Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.908 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 2006, functionality: fully functional, For sale is a Kolbe SW D-114/1 meat grinder/sausage stuffer, made of V2A stainless steel. 1 speed, 400V, 5.5 kW, 16A. The machine is in good condition and ready for immediate use. Further details upon request. Fedpszcwu Aefx Ad Isgd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C Fedpfxjvpagds Ad Isgd For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Year of construction: 1995, condition: excellent (used), REIFENHÄUSER RAM 160 PIPE HITCH - 6 Caterpillars Year of manufacture: Approx. 1990 Caterpillars: 6 Diameter: Min. 30 mm, Max. 160 mm Haul-off speed: 0.2 - 10 m/min With central chain lubrication Renewed gear motor and frequency converter With remote control and approx. 10 m cable Condition: Very good, ready for operation The haul-off is my property Fjdpfxswq E Eto Ad Ijgd We speak Spanish We speak French We speak English Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany