Used Sip Schweiz Dividing for sale (2,021)

Year of construction: 2026, condition: new, NEW – - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height Ndodpjd Tyaaofx Ab Aec - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Ndedjz Dibmspfx Ab Aoc Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: used, functionality: fully functional, machine/vehicle number: 33099, mileage: 79,900 km, power: 315 kW (428.28 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 16 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Nedpfxoz Hatxe Ab Aedc Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class EX/II including AT, weight variant 28 t, engine OM471, secondary water retarder, regulated water pump, transmission oil cooler, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, transmission lock for auxiliary drive, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle/rear axle 385/65R22.5, drive axle 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 170 mm), multimedia cockpit, tinted windshield, sunroof, electric windows, comfort central locking system, driver comfort suspension seat, co-driver functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, multimedia radio with touch screen, Bluetooth and navigation, digital tachograph VDO, trip computer, 24 V socket in the co-driver footwell, circuit breaker, pre-wiring for toll collection system, air conditioning, cruise control, refrigerator on engine tunnel, attention assist, turning assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 roof beacons on cab roof, sun visor horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 16 m³ (sludge chamber approx. 15 m³ / water chamber approx. 1 m³), water chamber is welded into the front of the tank with a maintenance opening, hydraulically upward-opening full-size cover with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with graduations every 500 l and internal float, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, discharge apron made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1300 m³/h) hydraulically driven, 4-way valve pneumatically controllable from the operating station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small, hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are available, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED roof beacon at the rear, reversing camera

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 Njdpfx Aoz Az Exeb Asdc In very good condition. Regularly maintained and in continuous operation until today.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Ndedpfx Ajz Nhzdsb Ajc Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Dofra Foodtech 20054743 01 Potato Segmenter Brand: Dofra Foodtech Model: 20054743 01 Ndjdpfjyku Naex Ab Aec Year of manufacture: 2015 Serial No.: 12150350 Power supply: 400 V Net weight: 700 kg Specification & equipment: - Segmentation kit (interchangeable): Longitudinal divider (2-part) Transverse divider (2-part) 4-part segmenting blade 8-part segmenting blade - Control: Control box with speed adjustment function The potato segmenter from Dutch brand Dofra Foodtech is a precise 2015 machine designed for automatic slicing of tubers into equal parts. Thanks to its comprehensive set of blades, the machine allows for rapid changeover of cutting formats – from simple halving to segmenting into 8 pieces, making it an extremely versatile tool for the production of French fries, potato wedges, or vegetables for ready meals. Stepless speed adjustment enables optimal adaptation of throughput to the operational requirements of the production line.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, The VEMAG sausage production line is a complete set of three cooperating VEMAG machines: the HP30E vacuum filler (2012), the LPG 208 length-portioning linker (2014), and the AH212 hanging machine (2016). The set covers the entire process from filling the casing, through portioning and linking sausages into lengths of a set size, to automatic hanging on smoke sticks, enabling efficient and repeatable production in medium and large meat plants. How does the VEMAG sausage production line work? Key advantages of the VEMAG sausage production line Vacuum operation ensures a compact, uniform stuffing without air pockets, improving the appearance, color, and shelf life of finished sausages. The LPG 208 linker allows cooked, fresh, and dry sausages to be produced on one machine, using natural, collagen, cellulose, and polyamide casings, and its automatic casing pusher shortens changeover times. Interchangeable dividing belts with quick-release catches can be changed in under 1 minute, and the linking speed can be set separately for each casing type. Gentle handling protects casings, including overlapped ones, and the hygienic design allows low-pressure cleaning. The AH212 hanging machine allows any hanging pattern (individually, in pairs, in threes, in fours, etc.) and ensures ergonomic work, reducing operator physical strain. All three units come from a single manufacturer and are designed to work together, which simplifies control, operation, and servicing of the entire line. Technical specifications of the VEMAG sausage production line VEMAG HP30E vacuum filler (Filler) Manufacturer: VEMAG Model: HP30E Year of manufacture: 2012 Filling capacity: up to 8,700 kg/h Portion weight: 5 g to 99,999 g Air consumption: approx. 40 l/min Portioning speed: > 600 portions/min Vacuum system: 40 m³/h Capacity: 350 l Ndjdjz N A Nijpfx Ab Aec VEMAG LPG 208 length-portioning linker (Linker) Manufacturer: VEMAG Model: LPG 208 Serial number: 2080470 Year of manufacture: 2014 Power supply: 400–460 V, 3~, 50/60 Hz Rated current: 7 A Power: 4.5 kW SCCR: 5 kA rms Weight: 517 kg Caliber range: approx. 13–40 mm and more Filling rate: from approx. 300 to 4,400 kg/h (depending on casing type and caliber) Linking head: twin, casing change in under 2 s Dividing belt changeover: under 1 min VEMAG AH212 hanging machine (Hanging Machine) Manufacturer: VEMAG Model: AH212 Serial number: 2120444 Year of manufacture: 2016 Power supply: 400–460 V, 3~, 50/60 Hz Power: 0.5 kW SCCR: 5 kA rms Weight: 298 kg

Condition: used, This listing is for a Watson Marlow 620S/R Peristaltic Pumps The units are in full working condition and ready for immediate use Design & Functionality The 620S/R model is part of the 600 Series of cased peristaltic pumps featuring a brushless DC motor equipped with digital keypad control (620S) and a sturdy NEMA 2 / IP31 vented, wipe‑down enclosure suited for dry industrial environments ,It operates at dual voltage (100–120 V or 200–240 V, 50/60 Hz) and includes features like MemoDose for one-shot dosing and wireless guard-switching for safety The casing is chemically resistant, with powder-coated die-cast aluminium construction and an easy-to-clean membrane keypad Ndodjxhdx Depfx Ab Asc Pump Performance Flow range: 0.00026 to ~4.23 gpm (equivalent to ~0.001 to 16 L/min) with the 620R pump head With newer 620RE LoadSure heads, the flow increases up to ~4.76 gpm (0.004–18 L/min) Pressure capability: Up to approximately 60 psi (4 bar) with the appropriate head and tubing Control accuracy: Exceptional 2,650:1 turndown ratio, fine speed control from 0.1 to 265 rpm in selectable increments (0.1, 0.5, 1, 2, 5, or 10 rpm), with 0.1% speed accuracy Pump Heads & Tubing The model supports the following interchangeable pump heads: 620R Mk II (continuous tubing, two rollers) 620RE and 620RE4 (LoadSure elements, two or four rollers) These heads are compatible with various tubing materials (e.g., Marprene™, Bioprene™, Sta‑Pure™, silicone) and sizes (typically 6.4 mm to 17 mm inner diameter) The 620RE and RE4 heads feature retractable rollers for easier cleaning (CIP/SIP) and rapid loading AFAB Lab Resources - Used Lab Equipment Physical Attributes & Construction Ingress Protection: IP31 (NEMA 2) for the standard 620S/R; there are IP66/NEMA 4X variants (e.g., 620SN/R) for environments requiring better dust and water resistance Weight: Around 19.6 kg (with 620R/RE head) to 20.1 kg (with 620RE4) Sound level: Less than 70 dB(A) at 1 m—relatively quiet for continuous industrial operation Advanced Features MemoDose: Delivers precise single-shot volumes—ideal for dosing applications Ramp function & non‑drip: Ramp improves handling of delicate fluids, preventing splashes/frothing, while non-drip minimizes residual drips at dose end (noted in related Di versions but often included in feature suites) Data export: Some models (e.g. 620S/RE) support RS‑232 export of batch records—important for GMP compliance

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) Ndjdpfxez I T Rmj Ab Ajc - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Year of construction: 2026, operating hours: 36 h, condition: used, functionality: fully functional, Product weight 2-500g, power220V/1P/50HZ, 0.6KW, Speed50-150pcs/min, machinesize: L1240*W535*H1130mm, SUS304,Weight 95kg The equipment can accurately divide the dough/pastry into evenly sized small dosages, which is suitable for the productionof variouspasta, and the divided dosage will be automatically beaten into the required shape, which has high production speed and high production efficiency. Nodpfx Abjzx D Dbj Aedc Hopper Material: 304 stainless steel 1. Food standard 2. The hopper is suitable for many kinds of fillings like dry filling, scattered filling and other fillings with poor liquidity. It is more anti-corrosion and stable. Enjoy a long life. Cutter and safety cover Features: 1. Easy to take apart and control product length. 2. Does not stick dough. 3. All the material which can touch food we also use healthy materials. 4. Can make different shapes by changing nozzles. 5. High-quality nozzle material. Used, in good condition, still under 1-year warranty from the manufacturer. Selling due to the factory closure. More videos & photos on request.

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 1,550 mm, type of input current: three-phase, input voltage: 400 V, We offer a rotary die-cutting machine, HMB Rotary Die-Cutter 1.5, which has seen little use, manufactured in 2005. For sale, we have a fully functional, Polish-made rotary die-cutting machine for corrugated cardboard. This machine is made by the renowned manufacturer HMB Mikołów, model 1.55. The machine is designed for the fast and precise cutting of shaped, flap, and grid-patterned packaging, as well as dividers, from corrugated cardboard using rotary dies. Technical specifications: Njdpez Iwp Hjfx Ab Ajdc • Manufacturer: HMB Zakład Mechaniczny Mikołów • Type / Model: ROTARY DIE-CUTTER 1.55 • Year of manufacture: 2005 • Working width: 1550 mm (1.55 m) • Certificate: CE • Power supply: 400 V Equipment and advantages: • Cleaning section (brush): Integrated shafts with brushes effectively remove cardboard waste immediately after die-cutting. • Take-off table: Includes the grid-patterned table shown in the pictures for collecting the finished cut sheets. • Polish design: Very durable construction, simple adjustment, and easy access to spare parts from the manufacturer in Mikołów. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters Nsdpjz Iww Refx Ab Asdc • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: excellent (used), Year of construction: 2010, 1,0 ST. gebr. Spritzgiessmaschine Hersteller: NETSTAL Typ: EVOS3500-2000 Ndjdpfez Iy N Ajx Ab Ajc Baujahr: 2010 Schließkraft: 350 Tonnen Holmabstand: 730 x 730 mm Schneckendurchmesser: 70 mm Spritzteilgewicht: 916 g/PS Ausstattung: Kernzüge 3 x DS / 2 x AS Schnittstelle Roboter

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: Nodpfxsz Irfvj Ab Aodc - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 3,820 mm, total height: 2,105 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 380 mm, product length (max.): 2,000 mm, input voltage: 415 V, compressed air connection: 6 bar, input current: 43 A, working height: 1,105 mm, length of welding knife: 1,370 mm, passage height: 380 mm, overall weight: 1,180 kg, power: 26.7 kW (36.30 HP), film width: 1,350 mm, input frequency: 60 Hz, year of last overhaul: 2026, space requirement width: 2,010 mm, Equipment: documentation/manual, safety light barrier, For sale is a used Saropack / SMIPACK BP1402AS strapping machine with an integrated shrink tunnel, manufactured in 2017. The machine was used in our facility, regularly maintained, and is in fully functional and ready-to-use condition. Suitable for the automatic or semi-automatic packaging and strapping of various products with shrink film. Technical data: - Manufacturer: SMIPACK S.p.A. / Saropack - Model: BP1402AS - Year of manufacture: 2017 - Serial number: 63604 - Connection: 3PH + N + PE - Voltage: 380–415 V - Frequency: 50–60 Hz - Power: 26.7 kW - Current consumption: 43 A - Sealing bar: approx. 1,370 mm - Maximum product height: approx. 380 mm - Automatic and semi-automatic operation Ndodpsz I Sz Rsfx Ab Asc - Motorized film unwinding - Integrated shrink tunnel - Suitable for shrink film / LDPE film Condition: Used, regularly maintained, and fully functional. Normal signs of wear and tear consistent with age and use. The machine can be inspected and demonstrated in operation by arrangement. Location: Kestenholz, Switzerland Price: EUR 22,900 (negotiable) Transport and loading by arrangement.

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 12,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,400 mm, loading space length: 6,500 mm, loading space height: 800 mm, first registration: 01/2026, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel construction, flap, lashing eyes, swing-out flap. Construction: Roll-off container with folding side walls and swing-out flap, approx. 12.5 m³, archive photos of roll-off container, roll-off flatbed: approx. 12.5 m³, with side walls and swing-out flap that can be driven over, with spring relief. Spring relief for the side walls and flap. Manufactured according to DIN 30722-1. Internal dimensions: 6500x2400x800mm. Nsdpfxsz Ng Tfe Ab Aedc Floor: 5mm - S235, wall: 3 mm - S235. Frame: INP 180. Floor / side wall 90 degrees. Side wall 800mm, divided in the middle with spring relief, removable stakes!! Front wall 1700mm high!! Last spars: C-profile 160mm. 8 x lashing eyes recessed in the floor (4 per side). Rollers: Length 300 mm, diameter 159 mm + greaseable hinges. Ladder screwed onto the front wall. Net hooks. Hooks: Ø 50 made of steel S355 | height: 1570 mm. Container inspected and approved according to DGUV 114-110. Surface / paint: Primed: Inside, outside, each 80 µm. Painted outside, RAL color: 40 µm. Color: RAL 7016 - hydrodynamic method. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Ndjdsz Ht Ebepfx Ab Aec Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: used, functionality: fully functional, machine/vehicle number: 32059, mileage: 98,300 km, power: 235 kW (319.51 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 10.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Nodjz E Hg Nepfx Ab Ajdc Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, front axle with leaf springs, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with multiple stages, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), 2 seats, air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-equipment for Toll-Collect, digital tachograph CONTI, Connectivity-Board module (RIO Box), sun visor on driver's door Cylindrical container designed as a tipper (tipping angle min. 35°), container wall thickness 6 mm, total air volume approx. 10.5 m³ (sludge chamber approx. 10 m³ / water chamber approx. 0.5 m³), vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel for 60 m HD hose DN 13, 40 m installed, spray gun, water chamber is welded into the front of the container with inspection opening, water chamber level indicator made of flexible, transparent hose, filling via a Storz "C" connection and free flow path, rear door hydraulically opens upwards over the entire cross-section with pipe breakage protection, hydraulic latch, sludge chamber level indicator with external scale with division every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blind cover, discharge chute made of stainless steel, 2 pneumatically operated slide valves, container emptying: free discharge through the lower suction connection or by tilting backwards, 4-way valve pneumatically controlled from the operating station, over-suction protection, oil separator, operating station made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, transport hose reel for suction hoses with hydraulic drive mounted on the floor flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), waste container made of stainless steel, tiltable at the rear left, toolbox made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left on the container, 1x LED rotating beacon at the rear, reversing camera

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Location: 3608 Thun, Switzerland Availability: immediate Ndedpfx Aboz Iuiqe Asc Inspection: possible by appointment Sale: preferably as a complete package The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Ndedpfxez Hkdno Ab Asc Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or Nsdpfjz D U Hnex Ab Ajdc bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 140 h, machine/vehicle number: 60005678, load capacity: 408 kg, empty load weight: 1,967 kg, transport length: 2,320 mm, transport width: 840 mm, construction height: 2,290 mm, fuel type: electric, Equipment: UVV, Skyjack SJIII 3220 – electric scissor lift Year of manufacture 2015, 140 operating hours, serial number 60005678. Working height approx. 8 m, load capacity 408 kg, weight 1967 kg. Dimensions L x W x H: 2.32 x 0.84 x 2.29 m. Electric wheel drive (2WD). Nodpfx Aoyzdlgeb Asdc Batteries, service, and SUVA check have been renewed according to the offer. Please confirm the inspection date, scope of inspection, and agreed services for the specific machine. Purchase price EUR 8550 net, plus applicable VAT. Transport costs are separate and will be quoted. Availability and condition will be confirmed in person. Inspection and collection in Ringgenberg by appointment.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Saddle compartment, leaf spring suspension, door/ramp combination Equipment: - Aluminum walls - Aluminum floor - Ramp/door combination Net: €11,756.30 / Gross: €13,990.00 Article number: IBX626110111.01 Technical data: • Brand: Ifor Williams • Model: HBX 506 • Vehicle type: Horse trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 326 x 167 x 229 cm • Exterior dimensions (L x W x H): 430 x 214 x 275 cm • Loading height of the floor: 38 cm • Permissible total weight: 2,600 kg • Tare weight: 880 kg • Payload: 1,720 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: KNOTT leaf spring suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Suspension with leaf springs for high driving comfort • Large XL saddle compartment with: adjustable saddle holder, bridle holder, storage compartments • Aluminum floor • Aluminum walls • Tie-down option outside • Tie-down option inside • Divided box bars with plastic protection • Center post partition, can be swivelled and removed at the front and rear • Side padding on the walls and on the center partition • Awning rail • Height adjustment for box bars • Depth adjustment for box bars • Panic release • Extra padding on breast and rear bars • Entry door on the right side, lockable • Door stop on the entry door • Single wheel mudguards, plastic (black) • 12mm thick rubber mat loose on the floor • Hay net rings • Kick protection on side walls (GFK plastic) • Doors above the rear ramp with panic release - can also remain open while driving • Towing handles • Front window/top doors can be opened on both sides (ventilation and swivel) incl. protective grille from the inside • Roof hatch • Lifting device, gas pressure shock absorber on the rear door • Ramp & door combination on the rear door • Step on the rear door • Lockable cast iron ball coupling • LED interior lighting • Spare wheel with bracket mounted Nedpjx S Ri Hofx Ab Ajdc • Lighting system with reversing light • 3rd brake light at the rear • 13-pin plug _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Ndedpsw E D Ivjfx Ab Aoc

Condition: excellent (used), Full automatic Saw blade diameter 450 mm Cut range diameter 150 mm Cut off lenght 1000 mm Nedpfxey H Dmne Ab Aodc Misc. accessories MARCELS MASCHINEN AG