Used Siemens Machine Control Panel for sale (94,900)

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Crodpfx Alswz Rifsbjg Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Programming console, operator panel, robot control panel Robot Teach Pendant, Teachbox, handheld control station, handheld console BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualizing IndraLogic, IndraMotion MLC, and IndraMotion MTX. 2. Setting up machines and systems. 3. Operating and diagnosing extensive handling systems. 4. Visualizing simple operator panels for assembly lines. Type No. VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No. R911170692-104-08W34-I-B-H-T Serial Number Year of manufacture 2008 Firmware FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of manufacture: 2008 Operating system Windows CE 4.2 Interface 1x Ethernet (RJ 45) Rated voltage 24 VDC Rated current 0.7 A Power consumption max. 14 W Display 8.4" Touch TFT, 800 x 600 pixels Crjdpfod Ab D Sox Albsg Operation Touch and button operation with 34 buttons Protection class IP 65 - Connection cable approx. 8 m - Connection plug 19-pin - Three-stage enable switch - Flexible use thanks to hot-plug principle Weight 3 kg Fully functional, tested Good condition

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. Csdpfx Aloq U N T Robsrg The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel Csdpfx Ajf Ih Hcolbjrg For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: good (used), functionality: fully functional, functionally tested; the item originates from the dismantling of equipment from an automotive supplier SINUMERIK Push Button Panel Crsdpfx Aljyq Sdnsbog MPP 1500D Connection: Industrial Ethernet AND PROFINET with interface for HT8

Condition: refurbished (used), Manufacturer: Siemens Series: SINUMERIK Credpfoyryggjx Albog Type: Operator panel front Part number: 6FC5203-0AF02-0AA0 Item number: 204558 Drawing number: 90210001109

Year of construction: 2000, condition: used, Like-new precision drill press, Speed adjustable via continuously variable Vario belt drive with 2 motor stages, Speed range, stage I: 275 rpm to 1800 rpm Speed range, stage II: 550 rpm to 3600 rpm Quill stroke: 90 mm Quill diameter: 52 mm Column diameter: 98 mm Overhang: 190 mm Spindle taper: MK 2 Table surface: 350 mm x 350 mm Table fixed, drill head height-adjustable via rack and pinion (approx. 360 mm) Table working height: 960 mm Dimensions: max. 2150 mm x 750 mm x 750 mm with table Accessories / Special equipment: Chip guard with electrical shut-off, Csdpfxsct I H Ae Albsrg Fine-adjustable depth stop, Halogen work light, machine documentation

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Credpjx S U I Hsfx Albsg Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Crsdpfoyzhlqox Albeg Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Condition: good (used), Control panel Application: Lisec LBH-25 butyl extruder Width: 570 mm Crsdpfxjyyauno Albjg Height: 255 mm Depth: 100 mm Weight: 2800 g Condition: Good, second-hand

Condition: good (used), BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control panel AC 230V/115V/0,4A/0,8A Cjdpfx Ajpufqhelberg Item condition: Used H2R3C11_2_RD

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. Credpexv A Srofx Albeg A control panel designed and built for WFI system

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable Crodpfx Asyymhuslbog via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Crodefu Ivzspfx Albjg Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Crsdpfjtpn S Iox Albjg Type of machine: NEF Plus 500 Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) Codpexu Uhvofx Alberg - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: ready for operation (used), Siemens A5E00302096 Panel system NEMA4 Touch 12" TFT SN: LBU9003862, serial number as per photo, used, slight signs of use, 100% functional, scope of delivery as per photos Csdpfx Aezu Em Aolbsrg

Condition: new, Siemens A5E00228005 Panel system NEMA 4 Touch 12" TFT SN: ST-S42025925, serial number as per photo, used, slight signs of use, 100% functional, scope of delivery as per photos Csdpfxexahkue Albsrg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer Crjdpfx Ajznr Sljlbog • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology Cjdpfxsxt Dk Rj Albjrg - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2026, functionality: fully functional, rapid traverse Y-axis: 20 m/min, spindle speed (max.): 60,000 rpm, mount diameter: 3 mm, total width: 800 mm, type of input current: AC, table length: 320 mm, table height: 560 mm, warranty duration: 12 months, working width: 560 mm, ambient temperature (min.): 18 °C, ambient temperature (max.): 30 °C, compressed air connection: 6 bar, working length: 320 mm, number of axes: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format production panels, small series of larger format, and cost-conscious manufacturing. PCB materials with breakout tabs can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive operating from above. The machine’s highlight is its easy and straightforward switch between small (320 x 280 mm) and large (320 x 560 mm) working areas. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technique • Flexible handling • Suitable for PCBs with breakout tabs • Milling spindle adjustment with servo-drive technology • Extraction device • User-friendly operation • Excellent price-performance ratio Crsdpfjxmfdxox Albsg Manual Depaneling – flexible and cost-effective The concept of manual depaneling offers significant advantages when it comes to flexibility and cost-effectiveness. Medium production volumes can be separated quickly and with minimal dust using the LOW MINI. Standard equipment includes dual loading with linear motor technology, while single-shuttle operation is available to expand the working area. Ease of maintenance and user-friendly operation, combined with its outstanding price-performance ratio, ensure convenient operation and make investing in this depaneling machine a worthwhile choice. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm Codsvuw R Ropfx Alberg - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate Crsdpfjxwvruox Albeg - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: excellent (used), Schunk Here we offer you a material separator. Crsdpfx Aezd Sq Telbjg Technical data: External dimensions: Width: 1325 mm Control panel width: 565 mm Depth: 1300 mm Shuttle overhang: 730 mm Height: 1870 mm Light column overhang (top): 350 mm Operator height: 900 mm Speed: X, Y: Linear motor axes 2000 mm/s Z: Linear motor axes 1000 mm/s Weight: approx. 1500 kg. Accuracy Repeatability: 0.02 mm Positional accuracy: 0.02 mm Separation accuracy: 0.10 mm with vision system 0.15 mm without vision system Working area Max. separation area X, Y: 430 mm x 350 mm Max. material size X, Y: 430 mm x 350 mm LP thickness: 0.5 - 3.2 mm Supply 400V / 50 Hz / 16 A Condition: used Type: SAR-1300 B Scope of delivery: As shown in the picture (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2016, functionality: fully functional, Operational condition - checked and confirmed by Cencorp OEM team June 2026. Health report upon request! Ask for additional information and pictures! Crsdpfx Aeyup Swolbjg