Used Screw Compressor Including Refrigerant Dryer for sale (32,649)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. Iedpozu Aibjfx Ah Estl It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 2017, operating hours: 19,178 h, functionality: unexamined, machine/vehicle number: APF220681, power: 160 kW (217.54 HP), operating pressure: 10 bar, pressure (min.): 8.5 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco ZR 160 VSD compressor is an ideal option for those who need reliable and efficient performance in an industrial environment. Even though it is a used model, it maintains its efficiency and reputation for durability. It can operate at a maximum pressure of 8.5 bar, making it suitable for various types of applications requiring constant and stable air compression. Equipped with unique VSD (Variable Speed Drive) technology, this compressor adjusts its speed to optimize energy consumption, which can significantly reduce operating costs. This is a particularly valuable feature in facilities where compressed air requirements often fluctuate. Iodpfoyx Ez Djx Ah Eotl Built by ATLAS COPCO, a leader in the field of compressed air solutions, the ZR160 VSD is synonymous with advanced technology and robust design. Despite being a used model, this unit guarantees high reliability and is capable of meeting the most stringent industrial requirements while ensuring excellent energy performance.

Condition: excellent (used), - 30kW engine - built-in dryer Ijdpfx Aswlcq Neh Eetl - Max. working pressure 7.5 bar

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Isdjzwmlrepfx Ah Eetl Technical specifications: Capacity: 3.60 m3/min; Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack Ijdpsztx Anofx Ah Eetl -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: excellent (used), Year of construction: 2004, operating hours: 116,000 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,520 m³/h, pressure (max.): 8 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser ESD441 250 kW 8 bar 42 m3/min Itjdpfx Aetn Utloh Ejl Year of manufacture: 2004 Operating hours: 116,060

Condition: excellent (used), Year of construction: 2007, operating hours: 9,667 h, PROD. KAESER TYPE ASD57 T S/N 1187 YEAR 2007 POWER (kW) 30 CAPACITY (m3/min) 4.65 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 9667/21953 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER yes, R134a 1.1kg HEAT EXCHANGER no Iodpfxeztqvye Ah Eetl COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Year of construction: 2008, condition: ready for operation (used), Max. operational pressure: 11bar, motor rotational speed: 2945/min, nominal power: 30kW, operational hours counter: 67,685h. Itedpel Dxmfofx Ah Eol

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Itjdpfx Aexdbvreh Ejl Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Iodpfx Aezvllneh Ejtl Serial number: AIF042384

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE DSD202SFC S/N 1937 YEAR 2013 POWER (kW) 110 Itsdpfezu Inpjx Ah Eel CAPACITY (m3/min) 4-17.3 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: good (used), MANUF. CompAir MODEL L132-7.5A S/N 349021/0688 Year 2003 Power (kW) 132 Output (m³/min) 20.4 Iodpjyn Ef Tjfx Ah Eotl Pressure (bar) 10

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Itsdpfsity Ecex Ah Eel Weight: 198 kg Operating hours: 0,5 Bh Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Year of construction: 2014, machine/vehicle number: APF194822, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Isdpezclgaofx Ah Eotl Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: good (used), Year of construction: 2011, Refrigerant dryer Manufacturer: Atlas Copco Type: FD150 Year of manufacture: 2011 Iodpfx Ahozvqwcs Eetl Power: 1 kW Volumetric flow rate: 9 m³/min

Condition: like new (used), Parts shown by hand not come. Itedpfx Ahsgvl Dno Eol

Condition: excellent (used), Year of construction: 2014, S016896 PROD. ATLAS COPCO TYPE GA75VSDFF Itsdpezi Dbhofx Ah Esl S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: new, Year of construction: 2022, feed pressure 10.0 bar Effective free air delivery 1.950 L/min motor 400 V 0 250 Liter weight of the machine ca. 467 kg. total power requirement 15.0 kW Ijdpfxsw U U Sce Ah Eetl range L-W-H 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in Germany Furnishing: - with container and dryer / can be used immediately - Microprocessor control SOLID base control - Network pressure sensor - Belt driven drive system - low compressed air temperature due to effective aftercooler - lying underneath compressed air tank - including cold compressed air dryer * automatically working with pre- and post-filter ( mounted ) (also available with 7.5 bar)

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, Hello, For sale: SCS 30-08A screw compressor. Isdpfx Ahezhux Uo Ejtl In good working order. Ready for use. The price stated in the advertisement is the net price, to which VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Please contact us by phone between 7:00 AM and 3:00 PM.

Condition: used, Year of construction: 2011, Manufacturer: BEGA capacity: 21 m3/min Itodpfx Ahsuk A Enj Eel

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Isdpst A Uyuofx Ah Eetl Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 44,918 h, functionality: fully functional, power: 275 kW (373.90 HP), volume flow: 2,662 m³/h, pressure (max.): 7.5 bar, Equipment: refrigerant dryer, type plate available, Second-hand oil-free Atlas Copco ZT275FF. Year of manufacture: 2014, with around 44,000 operating hours. 275 kW, 7.5 bar, with 44.38 m³/min. Integrated drum dryer. Itjdpfx Ahexr U Rxs Esl

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 dimensions 1200 x 900 x 1200 mm Itedpfx Ahjvuz Rhe Eel weight of the machine ca. 150 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 6,700 h, Kaeser SM 12 (2016) – Screw Compressor in Excellent Condition For sale: Kaeser SM 12 screw compressor from 2016 in excellent, well-maintained condition. Reliable, quiet, and energy-efficient compressor – ideal for workshops, print shops, or manufacturing facilities. Technical specifications: Iedpfxjxprwkj Ah Estl Manufacturer: Kaeser Kompressoren Model: SM 12 Year of manufacture: 2016 Motor power: 7.5 kW Free air delivery: approx. 1.1 – 1.3 m³/min (depending on pressure level) Operating pressure: 8 / 10 bar Voltage: 400 V / 50 Hz Integrated Kaeser Sigma Control Basic Low-noise operation, compact design

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 Itedpszq Aluefx Ah Esl PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED