Used Scm Mini Max Dolnowrzecionowa Formula T1 for sale (29,241)

Condition: ready for operation (used), Year of construction: 2022, working width: 1,350 mm, Belt sander manufactured in 2022. This SCM DMC SY TC 1350 features a working width of 1,350 mm and includes three sanding units: longitudinal, transverse, and longitudinal brush. If you are looking to get high-quality sanding capabilities, consider the SCM DMC SY TC 1350 machine we have for sale. Contact us for further details. • Condition: Used, not rebuilt, sold without warranty • Configuration: • 3 sanding units: Longitudinal – Transverse – Longitudinal • Brush unit Dkodpozyap Aofx Albst

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Dkjdjxy Tmnepfx Albst

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Dedpfxjyymz Ue Albokt Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, Year of construction: 2011, Usable working width: 520 mm Thickness table dimensions: 520 x 900 mm Max. working height: 300 mm Min. working height: 3.5 mm Min. workpiece length: 220 mm Max. material removal: 8 mm Cutterhead diameter (number of cutters): 120 mm (4 pieces) Cutterhead speed: 4500 rpm Feed rate: 5-8-12-18 m/min Motor power: 7 kW Dust extraction port diameter: 150 mm Dust extraction volume: 1300 m³/h Weight: approx. 680 kg Dimensions: 1150 x 1100 x 1250 mm Dkjdpfx Ajzimbdslbjt Storage location: Garbsen

Condition: excellent (used), Catalog number 7775 TECHNICAL DATA Dksdpfx Alezx Sx Tsbjt - roller width 640mm - number of knives 4 pcs - max. thickness of the workpiece 300mm – from top to bottom: - feed rollers - toothed, pulling, and twisting infeed roller - pressure roller - planing roller - pressure roller - 2 smooth, pulling, rubber feed rollers - digital thickness display - motor 5.5kW - electric table lifting 0.7kW - stepless feed rate adjustment 6-20m/min - feed motor 1.1kW - diameter of dust extraction nozzle 150mm - dimensions L/W/H 1000x1400x1200mm - weight 950kg ADVANTAGES - Italian made - electric thickness display - electric table lifting - used thickness planer, very good condition, original DTR documentation, CE Net price: 28500 PLN Net price: 6790 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8052 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 pcs - Maximum thickness of workpiece: 240mm - From top to bottom: - Feed rollers/kickers - Toothed, pulling, and twisting infeed shaft - Pressure roller - Planing shaft - Pressure roller - 2 smooth, pulling, metal outfeed shafts - Motor: 5.5kW - Electric table lifting - 4 feed speed settings: 6/9/12/18 m/min - Feed motor: 1.1kW - Diameter of dust extraction port: 160mm - Dimensions (L/W/H): 1300x1100x1400mm - Weight: 1060kg ADVANTAGES - Made in Italy Djdpfx Alszx Sr Tobekt - Electric table lifting - Used thickness planer, very good condition, complete with DTR documentation Net price: 19900 PLN Net price: 4738 EUR (depending on the exchange rate of 4.20 EUR) (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8037 TECHNICAL DATA - Max. width of the workpiece: 1100 mm - Max. height of the workpiece: 160 mm 2 units: 1) Metal, grooved roller for calibrating 2) Rubber, grooved roller + pneumatic sequential apron + metal roller - Motor power: 15 kW - Brake - Top: - Rubber roller, slip, split - Unit - Rubber roller, slip, split - Unit with apron - Rubber, slip, split output roller - Bottom: - 2 metal rollers, slip - Conveyor belt - 2 metal rollers, slip, output - Pneumatic belt oscillation with photocell - Electric table lifting - 2 feed speed types Dedpfxszx Sm Do Albskt - Feed motor: 0.45 kW / 0.8 kW - Grinding thickness potentiometer - Working pressure: 8-10 bar - Diameter of dust extraction nozzle: 2 x 160 mm - Overall dimensions (L/W/H): 1900 x 1700 x 2000 mm - Weight: 1413 kg ADVANTAGES - Made in Italy, SCM brand - 2 units - Grinding thickness potentiometer - Pneumatic sequential apron - Not painted - DTR documentation - Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (the price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted Djdpfxszx R Tcj Albokt – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical data: - max width of workpiece 900mm - max height of workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - rubber roller, slip roller I unit - 2x rubber roller, slip roller II unit - slip roller, rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - working pressure 6-8 bar - diameter of dust extraction nozzle 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Advantages: – Italian production, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6890 EUR, depending on the exchange rate of 4.20 EUR Dsdpfxjzx Rzyj Albekt (Prices may change due to significant fluctuations)

Condition: excellent (used), CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Author 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Author 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Author 912: mm 100 /1000 (o 500+500) 238400A) Loader (Bridge Frame) "MAHROS" single station, Mod. Runner 238400B) Connection transfer unit, with tilter (180°, up-side-down) "MAHROS" Mod. Rib 238400C) Gantry (Portal) CNC (Drilling and Routering) "MORBIDELLI" Author 912 - N.2 Vertical electro-spindles (on the Y-axis) for fittings - N.2 upper drilling units, each consisting of: - 2 vertical 36-spindle heads (72 in total per unit) Dkedpfx Aljzx R Akebet - 1 vertical 14-spindle heads (on the Y-axis) for fittings - 2 horizontal spindles (4 in total per unit) on the Y-axis - N.2 heads with 3 vertical spindles (for hinges) - N.2 horizontal units (1 R + 1 L) with N.2 21-spindle heads (21 + 21 = total 42) per unit 238400D) Stacker (Bridge Frame) "MAHROS", single station Mod. Runner

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm Dkodpfx Ajt Hal Djlbst PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Djdpju Tyx Aofx Albskt Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning Dkedpfx Alsixxwmebet POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: used, Year of construction: 2015, Numeric Control Startouch Control System Panel height mm. 60 Edges in PVC/Abs rolls mm. 3 Solid wood in strips mm. 6 Feed speed up to 11 m/min Working height adjustable electronically by C.N. Panel support guide with adjustment Dkjdpfetxtzksx Albet Side roller conveyor with idle wheels for panel support Anti-adhesive group Adjustable two-motor rectifier unit Reel holder plate Gluing group for EVA glue Edge pressure unit on straight profiles with adjustable pressure rollers Trimming unit with 2 motors with automatic inclination adjustment Gleaning unit electronically adjustable by C.N. Multifunction rounding unit (edner + rounder) adjustable by C.N. Edge scraper unit Glue scraper unit Oscillating brush group

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control MAESTRO consolle "eye-M PRO" Software “3D PROBE" per controllo automatico dimensioni pannello Djdpfjzx Dvdex Albokt Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Total installed power (A) 43 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC (power Kw 3.9) with spindles: - No. 21 Independent vertical boring spindles - No. 10 Independent horizontal boring spindles (6 in X + 4 in Y) - No. 3 Independent boring spindles (for hinges) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 7,5 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions)

Condition: used, functionality: fully functional, SCM Sandya 5 wide belt sander Working width: 1100 mm Sanding height: 4 – 170 mm 1 metal sanding unit 2 combi sanding units Dodpfx Aszx Afqolbokt Electric height adjustment Optical oscillation

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Dodpfxezxzgms Albjkt Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Dkodpfx Alszzbfzsbst Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Height: 1440 mm

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: AA1/8677, functionality: fully functional, overall weight: 3,570 kg, Equipment: documentation/manual, For sale: SCM Method K window manufacturing machine Includes: - slotting spindle - cross-cut saw - 2 profiling spindles - assembly spindle - top spindle (roller shutter groove) - Stehle IV 68 window tool set - floppy disks + complete documentation Year of manufacture: 1995 Very good condition Dksdpfoyti R Rox Albet

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: AH/115881, functionality: fully functional, overall weight: 2,364 kg, Equipment: documentation/manual, Element thickness: 60 mm Edge thickness: 8 mm Feed speed: 18 m/min Soundproof cabin: Yes Dedpfsytkczex Albskt Glue tank: Yes Touchscreen control (10 inches) Height adjusted manually from the control panel 4-axis milling machine, manually operated from the panel Cross cutting Two wrapping units, profile scraper

Condition: excellent (used), functionality: fully functional, planing height: 230 mm, spindle diameter: 40 mm, planing width: 170 mm, spindle speed (max.): 6,000 rpm, workpiece height (max.): 170 mm, workpiece width (max.): 230 mm, number of spindles: 6, Equipment: motor brake, SCM SUPERSET CLASSIC 230 6 spindles Spindle diameter: 40 mm Spindle arrangement: 1 - Bottom (7.5 kW) 6,000 RPM 2 - Right (7.5 kW) 6,000 RPM 3 - Left (7.5 kW) 6,000 RPM 4 - Top (7.5 kW) 6,000 RPM 5 - Top (7.5 kW) 6,000 RPM 6 - Bottom (7.5 kW) 6,000 RPM Feed rate: 5.5 kW / 6 - 36 m/min One driven roller in the table at the outfeed. Dkodpfxozw Umwe Albet

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 Dkodpfxsyudwzj Albet - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No Dedpfx Ajyll Snelbokt - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Profiles / mouldings wrapping line Composed by: a) “DOUCET” loading-infeeding system, Model MSP-APV-408 b) “SCM” moulding machine, model SuperSet XL c) “BARBERAN” wrapping machine, model PUR-31-LD Dksdpfx Aszxrakslbst d) “NORDSON” PU glue melter-dispenser, model VersaBlue

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: AB/165172, functionality: fully functional, power: 7.5 kW (10.20 HP), planing width: 180 mm, total length of planing tables: 3,250 mm, total width: 1,050 mm, total height: 1,600 mm, overall weight: 890 kg, Equipment: CE marking, documentation/manual, Offering for sale an SCM planing machine, Sintex XL model, with a Tersa cutterhead. The machine comes from a small business and has seen little use. Year of manufacture: 2004 Planing width: 180 mm Planing height: 105 mm Minimum planing width: 23 mm Minimum planing height: 6 mm Number of spindles: 4 Minimum workpiece length: 300 mm Main motor: 7.5 kW Feed rate: 6 + 12 m/min Pre-planning cutter available Dedpfx Ajzy R Ntslbskt Manual coolant pump Motor brake available Protective guard CE marking with declaration of conformity Extended infeed table, 2300 mm Dust extraction connection: 160 mm Weight: approx. 890 kg The machine is still connected and can be tested.