Used Ropi Ukm 380 for sale (4,313)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Bljdpfx Amjza Agroyjk Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender Bodpfszaz Tkex Amyjlk With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: used, Year of construction: 2004, operating hours: 3,623 h, Equipment: all wheel drive, Equipment: * 3,623 operating hours * Deutz engine with 44 kW * 20 KM/H * Bucket Bodpfx Amsyn Tt Esyelk * Forks * Additional work lights * Quick coupler * Tires: 12.5-20 Other information: * 2 previous owners * German machine * Year of manufacture: 2004 * Total weight: 6,500 kg * Wheel loader, ready for immediate use In November 2009, at approx. 1,300 operating hours, a new tachometer unit was installed. Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special rates. If interested, we are happy to provide you with an individual quote! We welcome trade-ins of your commercial vehicle or construction machinery. If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops. Please note: our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners for an additional charge. The information provided in listings, online, on price tags, and in images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if applicable. Subject to errors and prior sale.

Condition: used, mileage: 422,000 km, power: 279 kW (379.33 HP), first registration: 11/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 5,100 mm, loading space width: 2,300 mm, loading space height: 800 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Volvo FM 380 / 6x4 Tipper 5,10 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2006 ? MILAGE: 422 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 510 x 230 x 80 cm (L x W x H) CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 13R22,5 WHEELBASE: 390/135 cm SUSPENSION: SPRING CRANE: ATLAS TEREX 135.2ME - A2 + REMOTE CONTROL TEL: Bljdpjx Nlnxjfx Amyek * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 39828

Condition: used, mileage: 356,000 km, power: 279 kW (379.33 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,750 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, Renault T 380 Platform 6,75 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 356 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 675 x 245 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 525/135 cm TIRE SIZE: 315/70R22,5 FRONT : SPRING BACK : AIR CRANE: HIAB 111 B - 2 HIDUO + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Bsdpoyg Ag Ejfx Amyslk RADEK - ????? : 0727

Condition: used, mileage: 476,000 km, power: 279 kW (379.33 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,800 mm, loading space width: 2,550 mm, loading space height: 600 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, Renault T 380 Platform 6,80 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 476 000 km EQUIPMENT: Bsdpsyg Ulaofx Amyjlk ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 680 x 255 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 520/136 cm TIRE SIZE: 315/70R22,5 FRONT : SPRING BACK : AIR CRANE: HIAB 111 B - 2 HIDUO + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 0729

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: V: 3x380-400 Watt: 25,900 Blodpfxswu Adbs Amyjk Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: excellent (used), machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Bodpfx Ajqlaifomyolk Shears 300 mm to 12 mm steel on the flat steel shear

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos. Bsdpfjy S Ubtjx Amyelk

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: Blsdpfx Amou Nu Nkoyjk -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: used, mileage: 400,000 km, power: 280 kW (380.69 HP), first registration: 07/2005, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA 114 G 380 8 x 4 HIAB CRANE 2 x LIFT AXLE *ROLL-OFF TIPPER----VEHICLE HISTORY * VEHICLE ORIGINATES FROM THE NETHERLANDS * DELIVERY TO ALL PORTS POSSIBLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL GEARBOX * RETARDER * STEERING AXLE * CRUISE CONTROL * 2 X LIFT AXLE * HIAB LOADING CRANE * TYPE: 105 Z * 7.8 M LONG * TRAILER COUPLING * ROOF SPOTLIGHTS * TOOL BOX * GVW: 36,000 KG * PAYLOAD: 15,032 KG * VERY GOOD TYRES * IMMEDIATELY OPERATIONAL FOR MORE INFORMATION: ----EXPORT DECLARATION, CUSTOMS EXW WITHIN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 TECH. DATA SHEET (DATA TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied. Bledpfx Asy Sq Ehomysk Subject to change, error, and prior sale! More vehicles can be found on our website. Sale only according to our General Terms and Conditions – see website Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of the various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in terms of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, mileage: 522,000 km, power: 279 kW (379.33 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 10x4, wheelbase: 7,730 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories = - Aluminum fuel tank - Digital tachograph - Air suspension - PTO (Power Take-Off) - Radio/CD player - Sun visor = Further information = Technical information Bsdpfx Amey Rtvtsyolk Number of cylinders: 6 Engine displacement: 11,705 cc Axle configuration Axle 1: Tire size: 385/55 R 22.5; Steered; Left tire tread: 35%; Right tire tread: 35%; Suspension: Leaf spring Axle 2: Tire size: 385/55 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Leaf spring Axle 3: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 40%; Left outside tread: 40%; Right inside tread: 40%; Right outside tread: 40%; Reduction: single reduction; Suspension: Air suspension Axle 4: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 30%; Left outside tread: 30%; Right inside tread: 30%; Right outside tread: 30%; Reduction: single reduction; Suspension: Air suspension Axle 5: Tire size: 435/50 R 22.5; Left tire tread: 25%; Right tire tread: 25%; Suspension: Air suspension Weights Unladen weight: 17,860 kg Payload: 32,140 kg Gross vehicle weight: 50,000 kg Condition Damages: none

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX Blodpfxjy D Adto Amyek International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: new, Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Bjdpfx Amsqxtdisyjlk Diameter of spindle 30 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

Condition: new, Type MX5117B+V-380 Work table dimensions 1130x670 mm Spindle speed diameter 30 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 391 kg Bedpfx Asqxtfksmyelk Price 2360 Eur (EXW Jonava, Lithuania)

Condition: new, Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Bljdpfx Aedg Ucuemysk Machine frame - Cast aluminum Feeding direction:Forward/Reverse

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP Bjdpfoyrd U Ujx Amyslk - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: used, mileage: 392,994 km, power: 279 kW (379.33 HP), first registration: 06/2005, tire size: 13r22.5, axle configuration: 8x4, wheelbase: 1,800 mm, color: white, gearing type: mechanical, number of gears: 12, suspension: steel, Year of construction: 2005, Equipment: electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Make of engine: Volvo Axle configuration Tyre size: 13r22.5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Bedpfx Ajy Nld Hsmyjlk Weights Empty weight: 14.320 kg Carrying capacity: 17.680 kg GVW: 32.000 kg Functional Make of bodywork: LIEBHERR

Condition: used, mileage: 341,000 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, Year of construction: 2006, Volvo FM380, Bsdpfx Aey Nikqemyolk 2006, Euro 3 engine but registered as Euro 4! No AdBlue! 341,000 km!! Manual transmission, Old tachograph = More information = Front axle: Steering Rear axle: Double wheels = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 Blsdpfx Amoimr Icoyok OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Bledpfxsh Imvho Amyok Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: used,

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Bledpfx Amov Dvhyjysk Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: excellent (used), machine/vehicle number: YS2R4X20001253740, mileage: 827,465 km, power: 279 kW (379.33 HP), first registration: 10/1999, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 3,700 mm, Year of construction: 1999, Equipment: ABS, differential lock, electric window regulation, fog lights, = Additional options and accessories = Bedpfx Aey Ed Hremyjlk - 1 fuel tank - 1 sleeping place - Airbag - Armrest - Disc brakes - Front suspension: Leaf - Open roof - Rear suspension: Air - Sleeper cabin - Sper = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: reconditioned (used), Year of construction: 2006, 160 tons Krauss-Maffei injection moulding machine built in 2006 with Sepro robot and transport-belt. Screw diameter 35 mm, 2 core pullers, 6 hot runner zones. This machine will be delivered " reconditioned " and can be shown under power ! Bledeh Dh Dujpfx Amyek