Used Rms Shaker Vibration Test System for sale (48,209)

Condition: used, Horiba Nodpfx Aezdy Rneg Rewn Type: Mexa 7100D Horiba exhaust gas system Mexa 7100D Including JAG-10-000-061 cylinder cart, approx. 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust aftertreatment, evaluation of exhaust aftertreatment systems Modal analysis (dynamic or transient analysis) during non-stationary operating conditions Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 kg Year of manufacture 2016 Collection from our location Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Nwedpszii A Dofx Ag Rjn Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Eos EOSINT Here, we offer an Eos EOSINT plastic laser sintering system. The following items are included with the EOS P380 system: Build chamber Powder container Overflow container 3DM 8-zone process chamber heating, 250°C Each zone can be adjusted individually, homogeneous temperature field ± 1°C Kelvin Njdszdyxlopfx Ag Rjwn 350mm x 350mm x 610mm Voltage 3/N/PE/400V AC Frequency 50 Hz Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class open 4 Laser class closed 1 Weight 850 kg EOSINT P 380 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Nodpezyl Siefx Ag Rswn Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, type of input current: AC, input voltage: 230 V, overall weight: 723 kg, travel distance X-axis: 235 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 600 mm, input frequency: 50 Hz, workpiece length (max.): 600 mm, ZOLLER genius 3 threadCheck – CNC measuring and setting device for threading and cutting tools, year of manufacture 2016 The machine is in technically perfect condition and fully functional. THE STRENGTHS – WHAT DISTINGUISHES THE threadCheck FROM THE genius - One machine for all measuring tasks: The threadCheck can do everything the genius can, and with the appropriate adapter holders, it can also perform setting and measuring tasks like a venturion or smartCheck – instead of two or three devices, one is sufficient. - The threading specialist: The 6th CNC axis and the pivoting optics carrier (± 30°) align the optics with the helix angle. Thread drills, milling cutters, and thread forming tools are measured without distortion, contact-free, and with µm precision – the genius cannot do this. - Threading programs without programming: Flank diameter, pitch, flank angle, lead angle, back taper, taper; metric, UNC/UNF, Whitworth, trapezoidal, and round threads. - Grinding wheels and grinding wheel packs are detected and automatically measured via type selection (MP 410). - Fully automatic, operator-independent measurement with test protocol – reproducible, documented, and ensuring reliable handling of complaints. - Spindle ace: Run-out ≤ 0.002 mm, changeover accuracy 0.001 mm (according to the manufacturer). - Full enclosure protects against dirt and stray light – can be used directly in production instead of in the measuring room. Nwsdpfxo Advh Hj Ag Ren TECHNICAL DATA - 6 CNC axes · Tool length Z max. 600 mm · Tool diameter D max. 310 mm · Y-axis ± 50 mm - Connection 1 kVA, 230 V, 50 Hz · Compressed air 6 bar ± 10 % · Weight approx. 723 kg · gray EQUIPMENT - Software update 2023 to Windows 10 with pilot 4.0 V1.19 - Optics carrier genius 4 1:1/HR70, through-light camera 1:1/HR70, top-light camera HR70 with LED lighting, CNC pivoting device - HG spindle ace size I/AF/HLG with autofocus, hollow encoder for high-resolution C-axis - Operating unit cockpit-pilot with 23" touch display, keyboard, mouse · Control cabinet ventilation - Software threadCheck with photorealistic input dialog and protocol on monitor and printer - Measuring program package inspectionPremium (target/actual comparison, item statistics, cost analysis, TMS “Silver”) - MP 212 flank diameter · MP 370 thread former · MP 851 first full tooth · MP 410 grinding wheels/packs · Macro editor lasso - Collet set Ø 4–16 mm (10 pieces) · Extraction tool · Color laser printer SERVICE AROUND THE MACHINE On request, complete technical support from a single source – according to individual agreement: Software upgrade · Installation and commissioning · Operator training · Support during operation · Demonstration · Warranty according to agreement. PROCESSING Machine in transit, delivery from 16727 Velten near Berlin · FCA Velten including loading · 100% advance payment · Delivery date by arrangement · Inspection by appointment. Data sheet attached as a PDF. Technical data according to manufacturer’s documents and information from the previous owner (information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB). We will confirm individual values bindingly during the inspection. Errors and prior sale are reserved.

Condition: excellent (used), mileage: 409,294 km, first registration: 08/2014, fuel type: diesel, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 600 l, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, = Further Options and Accessories = - Power brake booster - Roof spoiler - Low noise emission - Speed limiter - Air suspension - Air horn - Particulate filter - Sleeper cab - Sun visor - Stability control - Auxiliary heater (parking heater) - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 10,300 kg Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FH 500 6X4 Tractor Unit EURO 6 L PACKAGE 500 HP DRIVE 6X4 PLANETARY AXLE AIR SUSPENSION WHEELBASE 320 CM FH GLOBETROTTER CAB OPTIONS: Nedeuxvx Eopfx Ag Rswn - AIR CONDITIONING (CLIMA) - NAVIGATION SYSTEM - REFRIGERATOR - MICROWAVE OVEN I-SHIFT AUTOMATED TRANSMISSION ALUMINIUM FLOOR LED HYDRAULIC CONNECTIONS LARGE DIESEL TANK 600 LITERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Year of construction: 1998, operating hours: 2,010 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 95/A/8419, We offer this refurbished Gearing & Watson V617 electrodynamic vibrator, manufactured in 1998. Model: V617 Maximum sinusoidal force: 4.6 kN Maximum random force: 4 kN Maximum shock force: 4.6 kN Maximum acceleration: 70 g Maximum velocity: 1.5 m/s Maximum displacement (peak-to-peak): 51 mm Frequency range: 5–3000 Hz Coil diameter: 174.5 mm Moving mass: 10 kg Maximum payload: 120 kg Coil resonance frequency: 2200 Hz Magnetic field: 5 mT Electrical power (400 V three-phase): 11.4 kVA Cooling: air-cooled Njdpfx Age Adtgge Rswn Total weight: 850 kg Dimensions (L × W × H): 1400 × 600 × 910 mm If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2015, overall weight: 900 kg, Used dust extraction system Höcker Polytechnik Vacumobil VT350-L, manufactured in 2015. Technical data: Extraction connection: 350 mm Nominal flow rate: 6,580 m³/h Nodpfx As Advdzeg Rown Maximum flow rate: 8,500 m³/h Motor power: 11 kW Weight: approx. 900 kg The system is located in our warehouse. Inspection and collection by appointment only. Loading and transport can be arranged. Price on request. Contact: DS-Maschinen – owner David Schulz. High-quality machines sourced from Germany, Austria, or Switzerland. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: new, mileage: 1 km, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 4,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Equipment: crane, General Information Year of Construction: 2026 Technical Information Number of Cylinders: 6 Engine Displacement: 12,900 cc Transmission Transmission: ZF TraXon, 12 gears, automatic Njdpfx Aezi D Hdeg Rswn Axle Configuration Brakes: Disc brakes Front Axle: Tire Size: 385/65R22.5; Max. Axle Load: 9000 kg; Tire Tread (left): 100%; Tire Tread (right): 100%; Suspension: Parabolic spring suspension Rear Axle 1: Tire Size: 315/80R22.5; Max. Axle Load: 13000 kg; Tire Tread (left): 100%; Tire Tread (right): 100%; Suspension: Air suspension Rear Axle 2: Tire Size: 315/80R22.5; Max. Axle Load: 13000 kg; Tire Tread (left): 100%; Tire Tread (right): 100%; Suspension: Air suspension Functional Lifting Capacity: 20,000 kg Crane: AJK HL 20-5430, Year of Construction: 2026, mounted behind the cab Condition Overall Condition: very good Technical Condition: very good Optical Condition: very good Damage: none Warranty Warranty: None

Condition: excellent (used), mileage: 934,865 km, first registration: 02/1984, fuel type: diesel, tire size: 12.00 R20, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, = Additional Options and Accessories = - Aluminum fuel tank - Radio/cassette player - Sun visor - Analog speedometer = Additional Information = General Information Year of manufacture: 1984 Cab: simple Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 12.00 R20; Max. axle load: 7500 kg; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle: Tire size: 12.00 R22.5; Max. axle load: 12000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 7,150 kg Condition Nsdpfxezin H Uj Ag Rewn Technical condition: very good Optical condition: very good Damage: none

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,780 mm, loading space volume: 94 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,790 mm, color: yellow, Equipment: ABS, = Additional Options and Accessories = - EBS - Rear doors - Lift axle - Air suspension - Disc brakes - Sliding roof Nodpfxez Air Eo Ag Rjwn = Notes = Very nice Krone Profi-Liner curtain-sided semi-trailer (year of manufacture 03/2021) with RSAB system (snow protection system, prevents the roof from sagging in case of snowfall), KRONE axles with disc brakes, ABS/EBS, 1st axle = lift axle, pallet box, sliding roof, rear doors, Multilock, 3 supports per side with 28 aluminum planks, internal dimensions 13.62 x 2.49 x 2.78 m, tires 385/65-R22.5 (L: 10/7/15 mm; H: 11/13/8 mm), unladen weight: 6,500 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until 05/31/2027 = Further Information = General Information Year of construction: 2021 License plate: OX-33-JP Axle Configuration Tire size: 385/65-R22.5 Axle brand: KRONE DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 65% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 75%; Tire tread right: 80% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 95%; Tire tread right: 50% Weights Unladen weight: 6,500 kg Payload: 32,500 kg GVW: 39,000 kg Functional Body brand: Krone SD Sliding roof: Yes Maintenance, History and Condition APK (Technical Main Inspection): Valid until 05/2027 Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2020, suspension: air, color: white, = Additional Options and Accessories = - Rear doors - Refrigeration/freezer unit - Air suspension = Notes = Schmitz Cargobull SCB*S3B - Frigo Schmitz - Hooks/rail system/meat hanging - ATP/FRC - Pallet box Year of manufacture: 11-6-2020 WSM000005243735 Hooks/rail system/meat hanging Pallet box Hours: diesel 20,429 / Electric: 777 Box: 13.40 - 250 - 264 = Further Information = General Information Year of construction: 2020 Axle Configuration Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,762 kg Payload: 32,238 kg Njdpfx Asz Dfu Neg Rswn GVW: 42,000 kg Functional Cooling: 20 °C to 20 °C Body manufacturer: Schmitz Cooling engine: Diesel and electric Condition Technical condition: good Optical condition: good

Condition: used, EDAG EDAG Huf Endurance Testing Stand Intended use: This testing stand is intended exclusively for testing components that are capable of rotational and/or translational movement within the scope of an endurance test and within the limits of the following technical specifications. Technical data: Dimensions: Width 1565 mm x Depth 615 mm x Height 1655 mm Weight approx. 450 kg Operating voltage 400V / 50Hz Control voltage 5, 24 Preliminary fuse 16 A Testing device: Nodpszh U Rdsfx Ag Rswn Maximum stroke 194 mm Maximum axial force 500 N Maximum torque 5 Nm Breakaway force (manually operated slide) 15 N Sliding force (manually operated slide) 10 N Other equipment: Ρ4, 24" TFT monitor (1900 x 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards: 1 card, NI PCI-6251, 1 card, N1 PCI-7044 Drawer 500 mm (full extension with automatic closing) Additional load 500 N Drawer cabinet, lockable, 3 drawers The teach-in endurance testing stand is a device for carrying out endurance tests on test objects that can rotate and/or move translationally, e.g., cylinder locks, door handles, key functions. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone. Nedpfx Aszd Uh Ieg Rown

Condition: used, 3D systems Here, we offer a 3D printer. Nsdpszd Tt Ajfx Ag Rjwn Solid-State Nd:YVO4 with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr™ coating system: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominally 0.13mm in standard mode Large line detection: Nominally 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Large line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Size (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Iridex Type: Iridex OcuLight SLx Laser: IRIDEX Oculight SLx Tri-Mode 810 nm diode laser Description: Designed for longevity, with a thermal management system to enhance laser conversion efficiency and reliability. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repetitive exposures. The LongPulse mode delivers laser energy over extended periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top device Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot SLAs, LIO, and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also offers some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, Nsdpozd Uubofx Ag Rjwn transscleral cyclophotocoagulation for refractory glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser Indirect Ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in a supine position. It features a unique optical design that eliminates the need to adjust the laser focus and allows for a wide range of working distances. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, SHI Machines Type: BlueBox As good as new, with only 250 operating hours! Technical data: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Nwsdpfoy Tg R Nsx Ag Rjn Max. torque: 720 Nm Adapter mounting tool CISPR 25 test table made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Loadable up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Activated carbon filter Weight approx. 900 kg Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Nsdpfx Aezizpcjg Rswn Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Automation Assistant Oy Linear Guided Free Fall Tester Automation Assistant Oy LG2750 Professional linear guided free fall test stand for reproducible drop and impact tests For sale is a used Linear Guided Free Fall Tester from the manufacturer Automation Assistant Oy. The test stand is suitable for reproducible drop and impact tests in research, development, quality assurance, and industry. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Machine type: Linear Guided Free Fall Tester Made in Finland Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: Concrete garden brick 300 × 300 × 50 mm Dimensions (approx.): Width: 850 mm, Depth: 900 mm, Height: 2750 mm Total weight: approx. 210 kg Test tower: approx. 155 kg Impact table: approx. 55 kg Equipment: Touchscreen control panel Enclosed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper Nwodpfszn Uqdjx Ag Ren SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Accessories as shown in the pictures Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Scope of delivery: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) Nwjdpfx Agszix Nme Rjn We will be happy to answer any further questions you may have by telephone.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 Nwsdpfxszg U Tio Ag Ron For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station Nodpfx Agozgr I Ro Rown The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Nodezdy Iajpfx Ag Rjwn Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Panasonic SUNX Type: LP-431-C Laser Marker Product Features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Nwedpfezdqpzjx Ag Ren Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0 - 40 degrees Celsius Permissible humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix, and bar codes Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: new, IPETRONIK Type: Interior Climate Simulation Box Technical data and description of the system: IPETRONIK Interior Climate Simulation Box (new and unused) The interior climate simulation box is designed to simulate the passenger compartment for testing in a recirculated air mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and fed into the interior. The interior climate simulation box is used to test only rear evaporators installed in the passenger compartment. The insulating housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulating chamber: Dimensions: External: Width 1,860 mm Depth 2,360 mm Height 1,360 mm Internal: Width 1,700 mm Depth 2,200 mm Height 1,200 mm Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with embedded eccentric locking catches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM diamond pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with the wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N/rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, leading downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heater tapes silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, heated viewing window, 500 x 500 mm, 3-pane glazed, surface heating (230 V), frame heating (230 V), heating controlled externally, silicone-free edging Sliding wall: 1680 x 1180 mm, 80 mm polyurethane rigid foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective film, closed with sheet metal on the reverse side (The rear wall can be adjusted manually and continuously to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is conveyed via a radial duct fan (Cosmo); heating is provided by an electric heater (Türk und Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk und Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Nwjdezd Ukpspfx Ag Rsn Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC system: S7 300 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.