Used Rmg 56-0776-85 for sale (5,568)

Condition: good (used), The Ruhle IR56 injector, equipped with a set of 56 needles and a corresponding number of incision blades, is designed for processing various types of meat – both with and without bones, including poultry, meat and fish. Thanks to the use of advanced microprocessor control technology, it is possible to precisely regulate all process parameters, resulting in uniformity and high quality of final products. The injector allows precise dosing of brine to each needle, which increases the efficiency and accuracy of the process. Features: – individual supply of brine to each needle separately, allowing for greater precision and efficiency of injection – productivity of the machine up to 5,000kg/hour Fedorwmndopfx Alqspg – tenderizer – an additional bar with a system of incision knives – independent cut-off of brine supply to individual needles preventing formation of so called brine deposits when a needle hits a bone – integrated brine preparation station, the design of which excludes contact of used brine with fresh brine – 350mm wide feeding belt – 200mm product clearance The construction of the device together with the high-performance brine pump are made entirely of stainless steel Power 7.5 kW Power supply 400 V 50 Hz / 3N L: x 1600 x W: 750 x H: 2020mm Weight 750 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Fedpfx Aled Tiu Ejqjpg Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Fpjdpfxoyx Dw De Alqjg Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 85 t x 2500 mm Weight: 9000 kg (without tools) Fpodpfeyxri Isx Alqjg Between columns: 2050 mm Service: In 10/2023, the pump was replaced by TRUMPF at a cost of EUR 10,000. Since then, the machine has operated approximately 200 machine hours.

Condition: used, Year of construction: 2016, operating hours: 6,760 h, 2016 | Eurocomach Es 85 Zt with 3 buckets | Used Midi Excavator 7t - 12t | 6760 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 70 inspection points 64 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fpedpfx Aleyc N R Asqog Good general condition of the hydraulic excavator, a leak on the boom cylinder needs to be reported, the belt of the left track is heavily worn. Alarm 90 is reported on the dashboard. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39701 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, power: 15 kW (20.39 HP), Year of construction: 2014, For inquiries regarding the construction equipment, Mr. Herden will be happy to assist you (Tel. ). Wacker Neuson RT 56 SC-2 remote-controlled trench roller / Operating hours: 552 h / Year of manufacture: 2014 / In stock & immediately available Price: €8,890.00 net / €10,579.10 gross - Operating weight: 1,560 kg - Drum diameter: 520 mm - Drum width: 560 / 813 mm - Overall dimensions (L x W x H): 1,855 x 560 x 1,230 mm - Displacement: 1,028 cm³ - Max. rated output: 15.5 kW (2,600 rpm) - Operating speed: 2,600 rpm - Fuel consumption: 5.64 l/h - Fuel tank capacity: 24 l - Vibration frequency: 41.7 Hz - Static linear force per drum: 10.1 N/mm - Dynamic linear force per drum (max.): 45 N/mm - Low travel speed: 20 m/min Fpsdpfx Alsyxaghjqjg - High travel speed – forward only: 40 m/min - Surface capacity: 990 m²/h - Gradeability without/with vibration: 50/45% - Turning radius – inside: 1.6 / 1.7 m Mr. Herden (Tel. ) will be happy to assist you. We are also pleased to provide you with a financing offer upon request. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. !!Subject to errors and prior sale!! Internal ID: 259956 = Further information = Unladen weight: 1,560 kg For further details, please contact Marius Herden.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 85-70, Self-cleaning overband magnet with frame. Suitable for conveyor belt width of 1200 mm. Working length 1470 mm x working width 645 mm. Fpsdpfx Alex Tid Ejqeg

Condition: excellent (used), Year of construction: 2019, Agfa Arkana 85 plate processing machine Year of manufacture: 2019 Excellent condition Fedpfsywvausx Alqjpg

Condition: used, mileage: 552,546 km, power: 353 kW (479.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 5,550 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,200 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Differential lock - Remote central locking - Lift axle Fpjdpfx Alew Dr H Rsqog - Towing jaw (Maulkupplung) - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Remarks = HMF 8520 OK6 Scanreco radio remote control. 4 x hydraulic outriggers. 6 x hydraulic extensions. Winch: 2,500 kg. 4.48 m – 16,030 kg 6.33 m – 11,100 kg 8.23 m – 8,310 kg 10.23 m – 6,520 kg 12.33 m – 5,300 kg 14.51 m – 4,440 kg 16.75 m – 3,820 kg Adjustable fifth wheel. Stainless steel toolboxes. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Tyre size: 315/70R22.5; Twin tires; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20% Front axle 3: Tyre size: 385/55R22.5; Steering; Tyre tread left: 60%; Tyre tread right: 60% Weights Kerb weight: 25,390 kg Payload: 11,110 kg Gross vehicle weight: 36,500 kg Functional Crane: HMF Financial Information Price: On request Identification Model number: TGX 37.480 8x2-6 / HMF 85 t/m CR = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: used, mileage: 552,546 km, power: 353 kW (479.95 HP), first registration: 04/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 5,550 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 8,200 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, seat heater, traction control, trailer coupling, = Additional options and accessories = - Differential lock - Remote central locking - Refrigerator - Lift axle - Towing jaw - PTO (Power Take-Off) Fpsdpfxsxrdave Alqeg - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = HMF 8520 OK6 Scanreco radio remote control. 4 x hydraulic outriggers. 6 x hydraulic extensions. Winch: 2,500 kg. 4.48 m - 16,030 kg 6.33 m - 11,100 kg 8.23 m - 8,310 kg 10.23 m - 6,520 kg 12.33 m - 5,300 kg 14.51 m - 4,440 kg 16.75 m - 3,820 kg Adjustable fifth wheel. Stainless steel toolboxes. = Further information = Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tyre size: 385/65R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70% Front axle 2: Tyre size: 385/65R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70% Rear axle: Tyre size: 315/70R22.5; Twin tyres; Tyre tread inner left: 20%; Tyre tread outer left: 20%; Tyre tread inner right: 20%; Tyre tread outer right: 20% Front axle 3: Tyre size: 385/55R22.5; Steered; Tyre tread left: 60%; Tyre tread right: 60% Weights Unladen weight: 25,390 kg Payload: 11,110 kg Gross vehicle weight: 36,500 kg Functional Crane: HMF Financial information Price: On request Identification Model number: TGX 37.480 8x2-6 / HMF 85 t/m CR = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po russki. We strive to provide correct information; however, no rights can be derived from the information provided.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Fpjdpfx Aew Eu Akslqeg 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: new, AUMA 07.1-F10 Multi-turn actuator New -Auftragsnr: 23078028 -NR: 2218NS66675 -PTB 01 ATEX 1119 -SKE0 56-2/80 -Art nr: Z048.703 - AZ F-3-S-ISO-STD Fjdev Uaicepfx Alqspg

Year of construction: 2001, operating hours: 22,539 h, condition: ready for operation (used), This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. Application Types Sawing (Wood) Fpodpsx D Exdsfx Alqsg

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information. Machine Benefits Technical Machine Benefits • Cross cutting aggregate • Cutting length: 1600 mm Fsdpeyaii Hsfx Alqjpg • Depth cutting aggregate • Cutting length: 5600 mm • Vacuum feeding device – for precise and automated material handling • Outfeed roller conveyor – ensures smooth transfer of cut parts Extra Information Machine still under power

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,710 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 1,600 mm, mast type: duplex, construction height: 2,300 mm, fork length: 1,200 mm, empty load weight: 5,000 kg, total length: 2,200 mm, construction width: 1,200 mm, Electric 4-wheel forklift Load centre: 500 mm Fpsdpfx Alsyrvbyoqog ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 0 - 20% Rear tyre type: Superelastic Rear tyre condition: 0 - 20% Battery voltage: 80V Battery capacity: 500Ah Battery manufacturer: Kapatest 85% Battery year: 2018 Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, windscreen, heater, full cabin, impulse control, full free lift, CE certificate, safety light,

Condition: used, mileage: 253,419 km, power: 353 kW (479.95 HP), first registration: 05/2018, tire size: 315/80/22,5, axle configuration: 4x2, wheelbase: 3,830 mm, brakes: intarder, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: electric window regulation, Tyre size: 315/80/22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.743 kg Carrying capacity: 11.257 kg Fedpfx Aljuc Ew Noqjpg GVW: 19.000 kg = Additional options and accessories = - PTO - Tipper hydraulics

Condition: new, axle configuration: 6x4, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro3, Front axle: Steered Rear axle 1: Dual tires Rear axle 2: Dual tires Damage: None Fsdjyv Ip Sopfx Alqspg

Condition: used, mileage: 801,000 km, power: 340 kW (462.27 HP), first registration: 05/2009, fuel type: diesel, empty load weight: 11,575 kg, maximum load weight: 14,350 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2009, Equipment: hydraulics, retarder, Intarder XLRAS85MC0E807454 6x2, Euro 5 Leaf/air suspension Wheelbase: 4.80m Fsdpfeh D Urpox Alqspg Austrian vehicle! Tel. 44

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Fedpsyv Aa Sefx Alqjpg Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Year of construction: 2000, condition: ready for operation (used), Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection is possible. A package sale of all items is preferred. Fodpfx Aleyu T Ehsqepg

Condition: new, neu ca. 4 Monate ab Auftragse Italien 78000 € 1474.2 € 85 to 500 mm 900x600 mm 600 mm 105 mm/s 7 mm/s 58 mm/s 7.5 kW 2250 mm 1150 mm 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation Fpedpeynm Ivsfx Alqog stroke adjustment pressure adjustment

Condition: new, neu ca. 4 Monate ab Auftragse Italien 89700 € 1695.33 € 85 to 500 mm 700x400 mm 800x600 mm 600 mm 300 mm 105 mm/s 41 mm/s 7 mm/s 58 mm/s 7.5 kW 1200 mm 1600 mm 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Fpjdpfx Aoynmxzelqeg Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Year of construction: 1996, condition: excellent (used), Used very clean, well maintained Trumpf V series hydraulic down stroke cnc pressbrake for sale Trumpf v85 2metre x 85ton – 4axis cnc pressbrake in good condition – video at the bottom of the listing Make: Trumpf Model: Trumabend v85 Year: 1996 Max. pressing force: 850 kn / 85ton Max. stroke: 215mm Brake time: 79ms Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Complete with: • Daylight: 390mm daylight • 2 axis back gauge Fjdpfx Alsi Igi Seqopg • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,290 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,350 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: IBH Battery year: 2022 Battery condition: 80 - 100% Description: Price includes new safety inspection (UVV), with original STILL parts fitted, new paintwork (original STILL), overhauled and tested battery from 2022 with Kappa Test 85% (value EUR 1,950.00 net), roof window will be retrofitted, matching charger with plug included. We are happy to organize low-cost transport for you. Lease-purchase possible! Sideshift, 3rd valve, rear work lights, front work lights, roof cover, full free lift, CE certificate, Multiple levers. Fsdpfx Aowct Tcslqspg

Condition: new, Year of construction: 2026, number of rollers: 3, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor Fodpfxoucqqus Alqepg - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V