Used Renz Cle 70 for sale (13,825)

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 33, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily new vehicle with COC, order vehicle with GSR 3 systems. Ijdpfx Aozw Ubzjpcobb 1 unit in white or customer-specified color. We are the representative of Ferqui in Germany. Ferqui is known for its high-quality fiberglass superstructures. Ferqui has been building with fiberglass since the late 1960s and is thus one of the pioneers in this segment. The vehicles have a permissible total weight of 7200 kg and therefore come with an Iveco warranty. Iveco C70 chassis with automatic transmission and 210 hp. Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, driver's luxury seat with seat heating. - Iveco Daily - School bus / coach on Iveco C70 chassis - Air-suspended rear axle - Telma - Length 8.59 meters, width 2.40 meters, height 3.1 meters - Body made of fiberglass - Frame construction made of galvanized steel - Front air conditioning - Webasto air conditioning in the passenger compartment RT 190 = 19 kW (thus dual AC) - Double glazing - Panoramic windshield - Electrically operated front door with recessed entry - Entry height at the front, without lowering, maximum 300 mm - Emergency exit at the rear - Total capacity (32+1+1) - USB ports at each row of seats in the coach - Fresh air vents at each row of seats - Convector heating - Iveco auxiliary heater with water and timer - Rear luggage compartment - Spare wheel compartment - 1 x side luggage compartment - Exterior color white Price per unit: 159,990.00 euros Net export possible.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Ibodpex Rvciofx Apcob Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Iodpoy Ir Nyefx Apcebb Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, number of injections: 2, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Ibodpfx Aeyzumzjpcsb Model: 520S 1600 290/70 – 2-component machine Year of manufacture: 2009, from first German owner - Total cycles: 12.3 million - Manual operation: 86,565 hours - Automatic operation: 78,099 hours Injection units (2K) Injection unit 1 – horizontal - 290 - Screw diameter: 25 mm - Shot volume: 71 cm³ Injection unit 2 – vertical - 70 - Screw diameter: 18 mm - Shot volume: 21 cm³ Clamping unit Mounting platens: 695 x 695 mm - Maximum platen distance: 925 mm - Opening stroke: 675 mm - Minimum mould height: 250 mm - Electric index rotation: present Extras Hot runner / additional axes - 12-zone hot runner integrated - 3x core pulls - 2x blow-out functions → incl. actuation for needle shut-off - Various customer-specific inputs and outputs Interfaces / Communication - ALS - Connection for temperature control units - Connection for dryers Handling / Multilift H (6 kg) - 2x vacuum circuits - 5x double-acting gripper functions - Z-axis servo-driven, 800 mm stroke - C, G, X, and B axes pneumatically actuated - Various customer-specific inputs and outputs → incl. gripper monitoring Complete maintenance log for the past 3 years - Both injection units re-sealed by Arburg - Clamping unit completely re-sealed by Arburg - Accumulator bottles replaced by Arburg in 2020 Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery (CPT) for reimbursement of freight costs Worldwide delivery Available ex stock in Hannover, Germany Information about our offered machines and company: - We only sell machines that we have purchased from active production, available from our warehouse in Hannover - All offered machines are inspected and tested before dismantling - We do NOT sell insolvency goods; we are NOT intermediaries dealing with third-party assets - All machines offered originate from successful companies where regular maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: good (used), We are offering for sale a used pallet racking upright from the manufacturer Mic Spica. Technical data for the pallet racking upright: Racking system: Mic Spica The scope of delivery includes: 1x Pallet racking upright, used Material color: cream white Ibsdpfx Apegzg Skjcsb Frame profile: 80 x 70 mm Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,780 mm high 1,000 mm deep

Condition: good (used), Technical data of the pallet rack uprights: Shelving system: Mecalux Included in delivery: 01x pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2,00 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled ( screwed truss ) 8.000 mm high 1.100 mm deep Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Iodpfx Aommcd Nepcjbb General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG Ibsdszw Azcepfx Apceb

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,432 h, load capacity: 7,000 kg, lifting height: 4,705 mm, free lift: 1,555 mm, fuel type: electric, mast type: triplex, construction height: 2,710 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Ibodpfx Aozwyf Sjpceb Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 1240Ah Battery type: PzS Battery year of manufacture: 2024 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, rotating beacon, LED, - Air conditioning

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Round: 45mm Ibsdpjzux N Rofx Apcob Square:45mm Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Ibsdpfxjvugv Aj Apcsb Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: used, mileage: 300,000 km, power: 152 kW (206.66 HP), first registration: 10/2021, fuel type: diesel, overall weight: 7,200 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 5,100 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, central locking, navigation system, parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3566]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV (technical inspection) & emission test * Nationwide delivery---- Summer offer: Upon request and for a surcharge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT can be shown German vehicle Accident-free First owner Euro 6 standard Regularly maintained Immediately ready for use Maxi Version XXL Platform length = 5,100 mm Platform + Edscha sliding cover Air suspension Cruise control Automatic climate control Cruise control Auxiliary heating Rearview camera Comfort driver's seat LED headlights Automatic transmission Navigation system Bluetooth multimedia function Special equipment: Iedpszwttcefx Apcsbb ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 AM – 6:00 PM Sat: 9:00 AM – 2:00 PM All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: excellent (used), Kuka Robot KR 70 R2100 SEL Industrial robot KCP 4 KRC 4 Complete Robot control cabinet, cable, panel Ibsdpfxjznkfws Apcsb 2 units in stock

Condition: used, Safop Leonard 70 CNC Roll Turning 30 ton capacity 1000mm Swing 6000mm between centres Twin saddle Hydrostatic bed 1000mm 4-jaw chuck Powered tailstock Swarf conveyor (2) Fume extraction cabinets EATA chiller safety enclosure Siemens Sinumerik 840c controls Iodpfx Aozwmkhepcobb Date of manufacture: 2000 Serial No. 5298

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm Ibjdpfxot Hwfnj Apcsb - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm Iodpfjk Ablpex Apcsbb height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Iodpfxok Abf Us Apcjbb Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Ibjdpfx Apok Abazjcob Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Ibjdpfx Apezwgrlecob Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: Ibjdpfx Ajxn I Sujpceb SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: Ijdpjxnzuiofx Apcebb The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: used, mileage: 406,827 km, power: 132 kW (179.47 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 5,100 kg, maximum load weight: 1,900 kg, overall weight: 7,000 kg, axle configuration: 4x2, wheelbase: 5,200 mm, brakes: other, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 6, loading space length: 4,550 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, cruise control, fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, * German vehicle * 1st owner * Condition: see photos * Specialized vehicle for temperature-controlled art and furniture transport * Polaris special chassis * Carrier refrigeration unit, type Supra 550 Nordic Silent Iedpjzwdvnjfx Apcsbb * Diesel and electric drive * Furniture container, dimensions 4.55 x 2.45 x 2.15 m * Walls with felt lining * Lashing rails in the walls and roof, and wooden floor * Palfinger tail lift * Type C 1000 L with remote control * Portal doors * Side door * 6-seater double cab * 2 air-suspended comfort seats with armrests * 2x seat heating * Auxiliary heater * Automatic climate control * Automatic transmission * Multifunction steering wheel * Cruise control * Bluetooth telephone with hands-free system * Traction control system (ASR) * Rear view camera with display * Electrically adjustable and heated mirrors * Electric windows * Wheelbase 5,200 kg * Gross vehicle weight (GVW) 7,000 kg * Unladen weight 5,100 kg * Payload 1,900 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the opportunity to inspect and examine the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without warranty. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, Directly from a mold-making shop: DECKEL MAHO DMC 70 V Control system: Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper size 40, 18000 rpm, 30-tool automatic tool changer, Iodozwdfvepfx Apcsbb direct path measurement, internal coolant system 40 bar, enclosed cabinet, chip conveyor, LTA emulsion mist extraction system, Year of manufacture: 1999, only 14,400 spindle hours EUR 11,900,- + VAT * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements can be carried out at any time. * Prices ex works, internal transportation and loading included.

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm Ibedpsp E Efvjfx Apcjb speed: approx. 15 m/min working direction: any work roll diameter: 80 mm

Condition: ready for operation (used), Year of construction: 2022, overall weight: 2,800 kg, load capacity: 70 kg, arm reach: 2,050 mm, total width: 2,250 mm, total height: 2,900 mm, product length (max.): 2,800 mm, number of axes: 6, This 6-axis HALTER LoadAssistant Universal Big 70 was manufactured in 2022. It features a robust design with a maximum loading table capacity of 3000 kg and can handle workpieces ranging from 10 to 300 mm in diameter. The integrated FANUC M-710iC/70 robot arm offers a maximum payload of 70 kg, enhancing its versatility. If you are looking to get high-quality automation capabilities, consider the HALTER LoadAssistant Universal Big 70 robot arm we have for sale. Contact us for further details. HALTER LoadAssistant Universal Big 70 (2022) • Control Unit Brand: HALTER • Control Unit Model: SmartControl • Touchscreen: 21 inch • Programming: Graphically supported programming (12 steps) • Number of CNC Machines: Up to 4 • Robot Interface: Standard interface for CNC machines • Power Supply: 400 V • Maximum Current: 16 A / 32 A • Required Air Pressure: 6.5 bar • Rotating Loading Table: Yes • Maximum Loading Table Capacity: 3000 kg Isdpfx Apjzuc Tascjbb Workpiece Capacity: • Workpiece Diameter: 10–300 mm • Minimum Workpiece Size (L × W): 10 × 10 mm • Maximum Workpiece Size (L × W): 300 × 300 mm • Robot Payload: 35 kg / 70 kg • Maximum Total Weight on Loading Table: 3000 kg • Maximum Number of Workpieces (10–35 mm): 206 • Maximum Number of Workpieces (23–55 mm): 112 • Maximum Number of Workpieces (23–85 mm): 62 • Maximum Number of Workpieces (23–115 mm): 46 • Maximum Number of Workpieces (23–175 mm): 28 • Maximum Number of Workpieces (23–195 mm): 24 • Maximum Number of Workpieces (23–300 mm): 18 Shaft Loading Capacity: • Workpiece Diameter: 10–40 mm / 10–80 mm • Minimum Workpiece Size (L × W): 10 × 10 mm • Maximum Workpiece Size (L × W): 40 × 40 mm / 80 × 80 mm • Workpiece Length: 300–600 mm Installed Options: • Turning Gripper Universal Big 70 • Turning Station • Status Indicator Light • Grid Plate 23–175 mm Big • Machine Interface Box • Machine Connection Cable Set • Complete Machine CE Certification With FANUC Robot Arm: • Manufacturer: FANUC • Model: M-710iC/70 • Robot Type: Industrial Robot • Number of Axes: 6 • Maximum Payload: 70 kg

Condition: new, Indramat SCS 70 6SK120310101 DSF 02 SN-S rotary encoder, VDC 7 - 12V, SN 64S020661, unused, 100% functional, scope of delivery as shown in the photos. Ibedpfx Aoztul Espcob