Used Rational Condensation Interrupter for sale (1,237)

Condition: used, mileage: 108,300 km, power: 220 kW (299.12 HP), first registration: 11/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: * TK box body by Kiesling, year 2020 * Rear portal doors * Cold curtain * Aluminum floor * Two lashing rails each on the right and left * Transverse load securing bar * Thermoking T 600R electric/diesel refrigeration unit * Night power supply socket including cable for refrigeration unit power hookup * BÄR 1.5 t tuck-away tail lift * Leather steering wheel * Turn assist * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Predictive Powertrain Control (PPC) * Navigation system * Automatic climate control * Bi-Xenon headlights * Low engine tunnel storage compartment * Overhead storage above the windscreen with cover * Comfort package * Visibility package * 220 Ah battery * CB radio * Interactive multimedia cockpit * 2 air horns on cab roof * Electrical pre-wiring in cab, 24V / 100A * Driving assistance system: Turn assist * 12-speed gearbox, type G 211-12 * Manual (steel) lifting roof * Heated fuel filter * 390 L aluminum fuel tank, left * Reinforced engine brake * Reinforced engine compartment encapsulation * Wheelbase version 5,500 mm * Rear overhang 2,400 mm * Smoker package * Acoustic reversing warning (external sounder) * Tail lift control switch * Additional remote control key * Fleet management system interface * Circuit breaker * Exterior sun visor * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Preparation for 4 surround cameras (display in onboard monitor) * Preparation for auxiliary headlights * Preparation for coolbox/refrigerator * Additional heater (water) * Further equipment: * Emission standard EURO 6 d * Front axle 8.0 t * Actros 5 * Heated front mirror * Trailer brake, 2-line * Connections on the left * Trailer socket 24V / 15-pin * Exhaust outlet centered under vehicle * Batteries arranged side by side, rear axle differential lock * Compressed air connection in cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Driving assistance system: Attention Assist (fatigue detection sensor) Pgodpfx Asxafgyjdleu * Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * Driving assistance system: Lane keeping assist * ClassicSpace, 2.30 m, tunnel 320 mm * LED outline marker lights * Full air suspension front and rear * Electric windows * Tinted windscreen * Urea (AdBlue) tank: 60 L * Central locking with comfort function * Front air intake * Two-stage air compressor * Heated air dryer * Engine 7.7 L – 220 kW inline-6 diesel (OM 936) * Ramp mirror * Disc brakes on front and rear axles * Remote control key * Flashing LED side marker lights * Cab seats: multifunction passenger seat * Front wheel splash guards * 12V socket in passenger footwell * Tachograph / EU control device * Truck Data Center 7 (fleet management system) front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Drop front axle * Gross vehicle weight 18.00 t * Tyres: 315/60R22.5 * and much more. * Subject to errors, changes and prior sale.

Condition: used, mileage: 319,800 km, power: 235 kW (319.51 HP), first registration: 10/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, color: blue, gearing type: automatic, emission class: euro6, loading space length: 8,100 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle no.: 94012A Tail lift MBB 1.5 t Equipment lines and packages * V2F Actros 5 Exterior * D7Q High engine tunnel storage compartment * F1P Actros S / M cab * F6I Heated approach/front mirrors * Trailer socket 24V / 15-pin * K7I Exhaust tailpipe routed to vehicle center * C7J Side-by-side battery arrangement * B1B Electronic braking system (EPB) with ABS + ASR * B4M Steel air reservoir * B4A Air supply unit with condensate monitoring * B1H Medium-sized air supply unit * F6Q Air horn * Cab mounting height: 420 mm * F7X Cab entry: fixed * F3W Cab: hydraulic tilting mechanism * F3A Cab: steel-sprung, standard * Cab floor with 320 mm engine tunnel * Cab width: 2.30 m * F6D Tinted windscreen (with shaded band) * Q9Z Vehicle without trailer coupling * F4H Vehicle without rear window * C9Y Vehicle without rear underrun protection * E1N Alternator 100 A * G1E 8-speed gearbox, type: G 140-8 * K3V Urea tank (AdBlue): 60 L * D8A Manual lift roof (steel) * I6A Body type: chassis * K1E Fuel tank: 390 L aluminum, left * F1S L-cab ClassicSpace, 2.30 m, 320 mm tunnel * LED daytime running lights * C6J Non-adjustable power steering pump * CLW Power steering oil cooling * F5A Roof air deflector (lockable) * M6M Two-stage air compressor * M5U Engine brake * Fog lights * L1I Fog lights with LED daytime running lights * Wheelbase not defined * C4V Rear frame overhang 3000 mm * Ramp mirror * R8P Spare wheel * R8A Spare wheel carrier, side mounted * E9H Tail lift switch for trailer * B2A Disc brakes front and rear axles * L2H Side marker lights LED, flashing * C8I Front mudguard * C6Q Front axle stabilizer * C7F Front underrun protection * I5A Permissible total weight 18.00 t Interior * D7Z Storage net on rear wall * D0S Air connection in cab * E9G Electrical pre-installation in cab 24V / 100 A * Electric windows * B1F Heated air dryer * E2J Circuit breakers * D3T Seat cover/upholstery: co-driver seat velour * D3Q Seat cover/upholstery: driver seat velour * D1N Seats in cab: co-driver function seat * D1C Seats in cab: driver comfort suspension seat * 12V socket in co-driver footwell * E3L Additional 24V socket in co-driver footwell Multimedia * J6B Multimedia cockpit * J6Y Remote online query function * J2U Navigation system * E4B Fleet management system interface * J1O Tachograph / EC control device * J3V Truck Data Center 7 (fleet management system) Psdox Efvxopfx Adlegu Comfort and environment * Autonomous emergency brake assist (Active Brake Assist 5) * M5C EURO 6 standard * S1L Driver assistance system: Attention Assist (fatigue detection sensor) * S1H Driver assistance system: Lane Keeping Assist * S1D Driver assistance system: Stability Control Assist * S1O Driver assistance system: Traffic Sign Recognition * I6X Suspension: leaf / air * Q1S Suspension: front leaf springs 7.5 t, 2 leaves * S5A Speed limiter system * S5Z Cruise control system * F8F Central locking system * M8Y Additional fuel pre-filter * Multifunction steering wheel * Rain sensor * G5G Mercedes-Benz PowerShift transmission * F8B Remote control key (2) * F8H Additional remote control key (2) * J9P Preparation for 4 surround cameras (monitor display) * F8E Central locking with remote control Safety * Vehicle outline marker lights LED * J9D Toll recording preparation Other * A1C Front axle load

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Pgedpfx Aoxxygxedlju Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing Pedpfx Adox Dihcjlogu - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction Pjdpfx Asyu Upujdlsgu For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 1,250 mm, total length: 3,540 mm, total height: 2,200 mm, warranty duration: 6 months, heating capacity: 184 kW (250.17 HP), Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Pgjdpeyzzqtjfx Adlou The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, ZP3000 Battery-Powered Sweeper The modern ZP3000 battery-powered sweeper is designed for intensive cleaning and maintenance of warehouses, industrial facilities, logistics centres, car parks and outdoor areas. With a cleaning performance of up to 4,500 m²/h, the ZP3000 combines efficiency, operator comfort and low operating costs, ensuring thorough removal of dust, dirt, leaves and small debris. The ZP3000 electric sweeper has been developed for the most demanding environments. Its robust construction, durable side and main brushes, and spacious 35-litre waste container allow large areas to be swept quickly and efficiently. Intuitive controls provide excellent operator comfort, even during long working periods, while the battery-powered drive ensures quiet and environmentally friendly operation, making the machine ideal for both indoor and outdoor use. Thanks to its water spray system, the ZP3000 enables simultaneous sweeping, vacuuming and light surface washing. The 105 cm working width and two 45 cm side brushes allow thorough cleaning of even hard-to-reach corners and edges. Using this machine helps reduce cleaning and maintenance costs while maintaining high standards of hygiene. Key Features of the ZP3000 Sweeper Cleaning performance: up to 4,500 m²/h – fast and efficient cleaning of large areas. Battery-powered drive: cable-free and emission-free operation that is quiet and environmentally friendly. Working width: 105 cm – a wide cleaning path for efficient operation. Main and side brushes: 2 side brushes, 45 cm each, for precise cleaning along edges and in corners. Waste container: 35 litres – fewer interruptions and increased productivity. Dust suction and water spray system: more effective removal of dust and light dirt. Ergonomics and safety: stable construction and easy operation. Versatile applications: warehouses, production halls, logistics centres, car parks and commercial facilities. Why Choose the ZP3000? Pedpfx Adjyufwvoljgu With the ZP3000 battery-powered sweeper, maintaining cleanliness in warehouses, industrial halls and other facilities is fast, efficient and hassle-free. This self-propelled sweeping machine effectively removes dust, dirt, leaves and small debris, minimising the time required for cleaning. The ZP3000 electric sweeper with a water spray system is an ideal solution for companies that value efficiency, ergonomics and environmentally friendly operation. The machine operates quietly and without exhaust emissions, while its 105 cm working width and two 45 cm side brushes ensure thorough cleaning, even in hard-to-reach areas. The ZP3000 is a reliable solution for professional cleaning and maintenance – from production halls and warehouses to outdoor areas and logistics centres. Applications of the ZP3000 Sweeper Production halls and warehouses, Logistics and distribution centres, Commercial facilities and large retail stores, All areas requiring efficient, emission-free cleaning. Technical Specifications Sweeping width 1050 mm Cylindrical brush width 435 mm Side brush width 300 mm Waste container capacity 35 l Operating time 3–4 h Cleaning performance 4,500 m²/h Battery 12 V / 100 Ah Main brush motor power 200 W Side brush motor power 90 W × 2 Driving speed 0–8 km/h Dimensions 1080 × 1050 × 1080 mm Weight 90 kg

Condition: used, mileage: 346,460 km, power: 200 kW (271.92 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 10,500 kg, overall weight: 16,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: constant throttle, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. ClassicSpace cabin, Active Brake Assist, short cab, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 8-speed manual gearbox, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO, chassis side coverings, differential lock, work lights, leaf/air suspension, trailer coupling with ball head, underride guard, roof hatch, green environmental sticker. Wheelbase: 4760 mm, 6.1 t front axle, rear axle with 390 Hypoid bevel gear, 11 t, electronic braking system with ABS and ASR, disc brakes on front and rear axle, condensation monitoring for compressed air system, rear axle stabiliser, steel front underride protection, leather steering wheel, classic cockpit, pollen filter, additional thermal insulation, communication interface (KOM), ClassicSpace, LED daytime running lights, headlamp cleaning system, engine brake, ESP (Electronic Stability Program), lane keeping assist, Active Brake Assist, rear engine PTO with hydraulic pump ISO 7653D. Pedpfx Adsxc Nzyslogu Chassis length approx. 5450 mm! Chassis height approx. 940 mm! ACCESSORY SPECIFICATIONS SUBJECT TO CHANGE. Errors, changes, and prior sale excepted.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 368.7 kW (501.29 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,380 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,430 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 411.8 kW (559.89 HP), Aircooled chiller/Heat pump TRANE RTMA105 368.7 kW / 411.8 kW Cooling capacity: 368.7 kW / 104.84 tons (12/7 — 35°C) Heating capacity: 411.8 kW / 117.09 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. 4-pipe system (Hot/chilled simultaneous water production). Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH01-90-340Y (screw) Type of refrigerant: R134а Number of fans: 8 pcs. (Frequency inverter) Dimensions: 5.43x2.25x2.4 m. Weight: 6380 kg Working hours: 4138/1893 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Pgodpfoxp Iz Esx Adlou After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Pjdpfx Ajxb Uz Aedlsgu Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), volume flow: 0.74 m³/h, pressure (min.): 10 bar, Exhibition machine includes 2 x 90-liter pressure tanks / galvanized includes refrigerant dryer includes automatic condensate drain includes oil-water separator includes microfilter includes sub-microfilter Rated power 5.5 kW Podpfx Adsxq Elwslegu Delivery rate at 10 bar: 0.74 m³/h Dimensions (W x D x H): 980 x 755 x 1257 mm approx. 300 kg

Condition: excellent (used), functionality: fully functional, NESS Smokehouse Chamber Installation with Cooling Shower and Smoke Generator Complete NESS smoking installation, designed for thermal processing, smoking, and cooling of meat products. The set includes smokehouse chambers of various capacities, a cooling shower, a wood chip smoke generator, and a condensate tank with Grundfos circulation pumps. The set includes: 1. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 2. NESS Smokehouse Chamber for 2 smoking trolleys Internal dimensions: 2100 × 1100 × 2000 mm External dimensions: 2400 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 3. NESS Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1100 × 1100 × 2000 mm External dimensions: 1500 × 1500 × 3050 mm Control cabinet: NESS UNIGAR with Digitronic RF3 D-N panel, 380 × 230 × 380 mm 4. Smokehouse Chamber for 1 smoking trolley Internal dimensions: 1030 × 1120 × 2000 mm External dimensions: 1350 × 1420 × 3050 mm Control cabinet: ADITEC MIC 200F, 350 × 200 × 550 mm Pgodpfx Aexq Rt Hodlju No door 5. NESS Cooling Shower for 2 smoking trolleys Internal dimensions: 2300 × 1170 × 2060 mm External dimensions: 2400 × 1350 × 2700 mm Control cabinet: NESS Duschmatic, 380 × 230 × 380 mm 6. NESS Wood Chip Smoke Generator Dimensions: 900 × 550 × 2400 mm 7. Condensate tank with 2 Grundfos circulation pumps Tank dimensions: 1100 × 1150 × 1200 mm Pump dimensions: (2×) 250 × 200 × 600 mm The NESS installation is an advanced smokehouse system enabling a complete technological process: smoking, cooking, cooling, and drying. The chambers are equipped with independent control cabinets featuring the Digitronic RF3 D-N system for precise process parameter management. The Duschmatic cooling shower allows for rapid and uniform cooling of products after the smoking process. The wood chip smoke generator and the condensate system with Grundfos pumps ensure reliable and hygienic operation of the entire installation.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 594.2 kW (807.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,005 kg, input voltage: 400 V, total width: 2,250 mm, total length: 7,560 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 675.7 kW (918.70 HP), Aircooled chiller/Heat pump TRANE RTMA170 594.2 kW / 675.7 kW Cooling capacity: 594.2 kW / 168.96 tons (12/7 — 35°C) Heating capacity: 675.7 kW / 192.13 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH51-140-538Y (screw) Type of refrigerant: R134а Number of fans: 12 pcs. (Frequency inverter) Dimensions: 7.56x2.25x2.4 m. Weight: 8005 kg Working hours: 11801/2195 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Pgedpfx Ajxpvztjdlju Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally Pgsdoxaa Ixepfx Adlju . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: new, Year of construction: 2025, functionality: fully functional, The A3 is the standalone series of portable measuring arms from the Trimos A-Line. Its key feature is its compact size, allowing you to take it anywhere without needing to assemble it. The 6-axis configuration arm is available with measuring ranges of 1.3 m and 1.8 m. Carbon fiber tubes and an aluminum mounting base give the A3 arm an extremely stable yet lightweight construction. With its mass balancing system, outstanding handling is guaranteed. The most precise range Extreme portability No special set-up required Autonomous operation thanks to the integrated wireless system Fixed or interchangeable probe Permanent counterweight for perfect, stable, and long-lasting balance Integrated Bluetooth system USB connectivity option Buttons mounted on the probe for improved measurement sensitivity A3 Models: A3 - 1300 Measuring range (m): 1.3 Axes: 6 Accuracy (mm): 0.016*1 Weight (kg): 9.5 Pgjdpsw Dzxvsfx Adlsu A3 Models: A3 - 1800 Measuring range (m): 1.8 Axes: 6 Accuracy (mm): 0.020*1 Weight (kg): 10.4 Operating temperature: +5 to +40 °C Relative humidity: 90% non-condensing Conformity mark: CE Power supply: 110 - 220 V / 50 - 60 Hz Ingress protection: IP 54 Connectivity: Bluetooth and USB Battery autonomy: >8 h Certification: ISO 10360-12 up to 3.2 m      ISO 10360-2 above

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Pjdexhgd Nspfx Adlogu Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: used, Year of construction: 2011, functionality: fully functional, cooling capacity: 256 kW (348.06 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,119 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,070 mm, total height: 2,230 mm, warranty duration: 6 months, Aircooled chiller McQuay MCEnergy MONO 073.1 SE ST 256 kW Cooling capacity: 256 kW / 72.79 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. McQuay HSA204QS11YA (screw) Type of refrigerant: R134a Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara LNEE 65-125/55/P25 VCS4, expansion vessel. Dimensions: 3.07x2.24x2.23 m. Weight: 3119 kg. Working hours: 16221 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Pgjdpfx Adewz H Ikelou Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, feed pressure / bar liter capacity / l Air consumption / m³/h For sale is a powerful ALUP Solo 18 screw compressor with 18.5 kW motor power, ideal for industrial use. The compressor is offered including a high-quality DRYPOINT RA refrigeration dryer from Kaeser - for reliable and efficient compressed air drying without moisture problems. The ALUP Solo 18 is a compact, oil-injected screw compressor, which is suitable for medium to large operations. It is characterised by its energy efficiency, low noise levels and high reliability Technical specifications Motor power: 18.5 kW Max. Operating pressure: 13 bar Delivery rate: up to 200 m³/h Low-noise and energy-efficient Including DRYPOINT RA refrigerant dryer for dry, clean compressed air Including compressed air tank for pressure stabilisation and condensate management Psdpfx Aowz Ry Dedlogu Perfectly suited for demanding industrial applications Technical data taken from publicly available sources

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 26.5 kW (36.03 HP), type of input current: three-phase, type of cooling: air, overall weight: 365 kg, input voltage: 400 V, total width: 1,150 mm, total length: 1,950 mm, total height: 1,400 mm, warranty duration: 12 months, heating capacity: 31 kW (42.15 HP), Aircooled chiller/Heat pump KAMPMANN WSAN XSi 14.1 26.5 kW/31 kW Cooling capacity: 26.5 kW / 7.53 tons (12/7 — 35°C) Heating capacity: 31 kW / 8.81 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric LNB65FAEMC (rotary, inverter) Type of refrigerant: R410a Number of fans: 1 pcs. ZKSN-750-8-10 Hydraulic module: 1 pcs. water pump WILO BAC40-125-0,75 Dimensions: 1.95x1.15x1.4 m. Weight: 365 kg. Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Pgodpewbdhnjfx Adlou Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, overall weight: 475 kg, total length: 1,890 mm, total width: 720 mm, total height: 1,600 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 110 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Hertz HGS F 15 Compact (10 bar) screw compressor Delivery volume: 2.2 m³/min - Energy-efficient IE3 motor with star-delta configuration - 500-liter compressed air tank - AD2000 certificate - Integrated refrigerant dryer - Pre- and post-filters - Condensate drain - Digital control system Logic 9 Pedjwum N Iepfx Adlegu Upon request, the compressor can be delivered within a 200 km radius of our company headquarters (unloaded). Delivery costs upon agreement.

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Pgedpfxsykn T Se Adleu Specifications: Capacity: 550 L Construction Material: Stainless Steel Horsepower: 5 hp Dimensions: 44.8819 x 32.0866 x 39.9606

Year of construction: 2022, condition: ready for operation (used), This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine. • Max. measuring length (W × D × H): 10,000 mm × 3,500 mm × 5,000 mm • Certified measuring range (W × D × H): 3,000 mm × 1,500 mm × 1,500 mm • Measurement accuracy: ±(28 + 5 L/1000) μm* • Repeatability: ±10 µm • Minimum display unit: Distance: 0.001 mm, Angle: 0.001° • Rotation angle of the measuring head: Horizontal ±90°, Vertical ±30° • External input 2 voltage-free inputs • Communication • Bluetooth communication Bluetooth 5 • USB communication USB 3.0 • Infrared communication 945 nm • Power supply: Powered via supplied mains adapter • Rated voltage: 24 V DC • Current consumption: 1.7 A • Environmental conditions: Operating ambient temperature +10°C to +35°C • Operating relative humidity: 20 to 80% (non-condensing) • External dimensions: 327.7 mm × 250.9 mm × 357.3 mm Additional equipment • Measuring Head WM 3000 • USB Cable • Power Supply • Measuring Probe WMP3000 • Probe Tip Ø 5 mm • Calibration Device • Tripod • 3D-CAD Add-on Software • Transport Case • 4x Batteries for Measuring Probe Machine Benefits Technical Machine Benefits • Battery charger Podpfx Adox D Sdaolegu • Dongle for measuring software Extra Information Machine still under power

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". Pgsdpoxv Af Eefx Adleu The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Pgedsxv A T Nepfx Adlsu Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Podpfx Aoxzg Ubjdlsgu Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max