Used Profile-Bending Machine for sale (68,172)

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm Dwedsgh T Hrepfx Albob - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm Dedpfx Aey Em Dgslbewb - Weight approx.: 4500 kg

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Dsdpfoxcx Atox Albowb

Condition: excellent (used), Year of manufacture: 2001 Maximum pipe diameter: 60 mm Maximum bending radius: 30–150 mm Maximum wall thickness: 5.5 mm Dsdpfezxq Rhox Albswb Power: 27 kW Control system: CNC Serial number: 2001-0320

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Dwodpfoxabkhjx Albob - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Dwsdpfsxabm Asx Albeb - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Djdoxabzaepfx Albowb - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Djdpfx Aljxab E Esbowb - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: Djdpfx Alexab Tcebewb - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Dedpfjxabuyjx Albjwb - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment Dodpfx Alexaacvebswb - Digital position display for motor-driven adjustable side roller

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min Djdpfxoxabhaj Albswb work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual Dwjdpsxabhmofx Albob

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW Dodpfxoxabnte Albswb weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Dwedpfx Alsrc Hiisbsb

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec Dedpfx Aloxabtvjbewb return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: Dsdjxabflspfx Albswb - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm Dodpfx Ajy Uwhbelbewb - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels Djdpfx Aoq Nipyelbowb - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Dsdpfx Asxaa Sdolbowb Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, sheet width 2600 mm plate thickness 10,0 mm pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity Dedpfx Ajxaalqslbewb - Operation manual

Year of construction: 2012, condition: ready for operation (used), An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China. Dodpfx Aljxfknaobswb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, shaft diameter: 100 mm, bending force (max.): 28 t, stroke length: 200 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Capacity: 90 mm Shaft diameter: 100 mm Usable shaft length: 280 mm Roller speed: 4.6 rpm Bending force: 280 kN Stroke: 200 mm MACHINE DETAILS Control: Conventional Dsdpfx Ajxmgw Tslbswb Motor power: 12.5 kW Dimensions (L x W x H): 1,600 mm x 1,600 mm x 1,800 mm Weight: 2,800 kg EQUIPMENT CE marking Documentation

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Dwsdpfxoxcux Rj Albob Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, number of axes: 3, overall weight: 2,500 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program Dwsdpfx Aszwk Spolbsb  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons