Used Parker Hose Press for sale (14,482)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Nljdpfx Agsw Sgnko Ish Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Nodpfx Agez N R Umj Iolh Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V Nledpfx Ajz N R Uyog Ijh The machine has documentation, maintenance tools, drills, and a new column

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: Nljdpfez Izrfsx Ag Ioh * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating * Thermoforming * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Nledpfx Aez Iz Dbjg Ieh Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Control system: LVD MNC 95 Total power consumption: 14 kW Machine weight (approx.): 7,700 kg Njdpfx Aez I N Hweg Ielh

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition ! Nodpjz I S Svjfx Ag Iolh

Condition: excellent (used), Year of construction: 2010, Used press brake from MVD Type EAP12 040D Capacity 1250 x 40 tons Delem DA56 CNC control Y1, Y2 and X axes CNC controlled Akas Fiessler laser safety system Includes numerous tools Njdpfx Agoz Il U Ro Ijlh

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to Nsdpfx Aewiqq Ssg Islh 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Nledpfx Agey D Abfj Ijh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Nodpfx Agsz Rrbds Islh Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL Nljdpfx Agjr Hby Ho Ish - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm Nlsdpfxez Rmyhj Ag Ijh - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick - Without hydraulic oil Price on request

Condition: good (used), functionality: fully functional, Year of construction: 1991, stroke length: 180 mm, throat depth: 300 mm, overall weight: 7,400 kg, total length: 3,200 mm, total width: 1,700 mm, total height: 2,250 mm, power: 11 kW (14.96 HP), pressing force: 125 t, clearance between the columns: 2,600 mm, Press brake, bending length 3100 mm, capacity 125 to, control DELEM 58, gap between column 26000 mm, stroke 180 mm, throat gap 300 mm, motor 11 KW, back gauge, dimension 3200x1700x2250 mm, weigth ca. 7400 kgs, 2 frontarms, foot pedal, serveral tools Nodpez Rqlnsfx Ag Iolh

Condition: good (used), functionality: fully functional, Year of construction: 2015, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen Nlsdpfx Agoz Rl Nho Ioh - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 94,201 h, control type: CNC control, bending force (max.): 400 t, installation height: 595 mm, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m Nledpjz Rmcvsfx Ag Ioh + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: excellent (used), Year of construction: 2008, stroke length: 4,000 mm, throat depth: 400 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, overall weight: 23,000 kg, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, power: 42 kW (57.10 HP), pressing force: 320 t, clearance between the columns: 3,150 mm, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nodpjz Rmp Njfx Ag Ielh

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Nlodpfx Agjz Rmg Uj Ioh Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device Nledpfx Aoxd Tiqeg Ioh ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear Nodsy Dfcljpfx Ag Ielh (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Njdpfjzwppyex Ag Islh Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Nsdpfou Nfkxsx Ag Ielh Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. *

Condition: used, Technical details: Nedpfju Nfnkex Ag Islh pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec Nlodpfx Agou Nfq Eo Ish ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm *

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Preparation for heating the boards with hot water - without a boiler Nledevva Syspfx Ag Ioh Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator