Used Paint Stripping Automat for sale (26,162)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator Iijdpfxjzlktpe Aa Eed RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Ijdpfxjzli Ulo Aa Esid

Condition: new, Year of construction: 2026, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Isdpov Iqaxjfx Aa Eoid Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: good (used), functionality: fully functional, Cutting capacity 90° round: ø260 mm Cutting capacity 90° square: 230 × 230 mm Cutting capacity +45° round: ø170 mm Cutting capacity +45° square: 150 x 150 mm Cutting capacity -45° round: ø230 mm Cutting capacity -45° square: 230 x 230 mm Iodpfozi Ahmox Aa Ejid Cutting capacity 60° round: ø120 mm Cutting capacity 60° square: 110 x 110 mm Mitre cutting left/right: 45° / 60° Cutting speed: 35/70 m/min Feeder clamp stroke: 860 mm Blade size: 3,150 × 27 × 0.9 mm 5" touch screen: Manually, Semi-automatic, Fully automatic Included: Cooling unit, Full automatic bandsaw, Additional bandsaw Country of origin: Italy Motor power: 1,5 - 2,2 kW Machine (L×W×H): 220 × 310 × 130 cm Machine weight: 1,500 kg

Condition: reconditioned (used), warranty duration: 6 months, Fortuna 3 semi-automatic dividing machine - used - refurbished - weight range: 30-90 g Ijdpfxszlhb Ds Aa Ejid - motor power: 1 kW / 400V - 3 working trays - very good technical condition - 6-month warranty - pick-up from warehouse / shipping option available - price on request

Year of construction: 2021, condition: used, ILKE FIRAT FBK 8000 M paint booth Power: 380 V 50 Hz Lighting: 230 V 50 Hz Total power: 25 kW All further information can be found on the nameplate in the additional images. Color: white Year of manufacture: 2021 Isdozizvvjpfx Aa Esid Machine number: 032112105 Dimensions L/W/H: 800x307x400 cm Condition: Used

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Iodpfx Aaoziyrie Eoid Manufactured in 2020. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Iiodpfsziyq Sjx Aa Eod Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: used, Year of construction: 2022, Technical details: cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. Isdeu Nig Rjpfx Aa Eoid *

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting width (max.): 440 mm, control type: PLC-controlled, total height: 1,600 mm, total length: 3,300 mm, total width: 1,500 mm, overall weight: 4,700 kg, cutting range round steel at 90°: 440 mm, Equipment: CE marking, documentation/manual, Automatic band saw for Aluminium, capacity Ø 440 mm, 90°-cut, cutting speed 200-1100 m/min stepless, motor 22 kw, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device with filter, dimension 3300x1500x1600 mm, weight ca. 4700 kgs Iodpsy Awagofx Aa Ejid

Year of construction: 2026, condition: new, functionality: fully functional, total width: 3,310 mm, total height: 2,830 mm, lifting height: 1,800 mm, mast type: triplex, drive type: elektrohydrauliczny, permissible axle load: 4,500 kg, arm reach: 1,400 mm, arm spacing: 2,820 mm, platform width: 2,820 mm, section length (min.): 110 mm, machine/vehicle number: TW240E, control type: manual, Equipment: 3rd hydraulic function, CE marking, documentation/manual, double-sided, type plate available, The Digima TW240E car lift is a professional, automatic two-post lifting system designed for everyday use in automotive workshops, mechanical service centres and vehicle maintenance facilities. With a lifting capacity of 4,500 kg, it is suitable for safely lifting passenger cars, SUVs and selected light commercial vehicles. The maximum lifting height of 1,800 mm provides convenient access to the underbody and allows mechanics to perform repairs, inspections and maintenance work comfortably. Ijdpfx Aaszlgc Hs Eeid The TW240E features a robust base-frame construction with a floor-mounted connection between the columns. This solution makes the lift suitable for workshops with limited ceiling height. The overall height of the unit is 2,830 mm, the total width is 3,310 mm, and the clear distance between the columns is 2,820 mm. A minimum lifting height of 110 mm also makes it easier to service vehicles with low ground clearance. The lift is equipped with an electrohydraulic drive system powered by a 2.2 kW motor and a 380–400 V power supply. The automatic electromagnetic Solenoid Lock safety system allows the locking mechanisms to be released conveniently from the control panel. A 24 V low-voltage control system, emergency stop button and aircraft-grade cable synchronisation ensure stable, even and safe lifting of the vehicle. Universal two-stage and three-stage lifting arms make it possible to adjust the support points to vehicles with different wheelbases and body lengths. Adjustable rubber lifting pads with a height of 80 mm protect the vehicle sills and make correct positioning easier. Self-lubricating UHMW sliders and reinforced C-shaped arm holders increase the durability of the structure, ensure smooth operation and allow the lift to withstand intensive daily use. The Digima TW240E is a solid, functional and easy-to-operate lift for workshops that require a universal solution for servicing different types of vehicles. Its high lifting capacity, automatic safety systems, strong construction and CE certification make it a safe and durable addition to a professional workshop.

Condition: reconditioned (used), functionality: fully functional, overall weight: 550 kg, total length: 730 mm, total width: 770 mm, total height: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider-Rounder Fortuna Automat A 4 H Dough dividing and rounding machine Iisdpfx Aasy Rhg Te Eod TOP model bun press Very robust engineering! With rounding deactivation Head cleaning position Dividing head newly overhauled, 30-division Spare parts service With NEW stainless steel blade Only from us: DGUV V3 tested 3 rounding plates Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (W x D x H) Refurbished and SAB-tested used machine With warranty Visit our large showroom!

Condition: excellent (used), Urschel GRL strip cutter for French fries. The machine has been serviced and is ready to work. SPECIFICATIONS Length: . . . . . . . . . . . . . . . . . . . . . . 59.25" (1505 mm) Width: . . . . . . . . . . . . . . . . . . . . . . . 63.38" (1610 mm) Iedpfx Aaov Srfqs Esid Height: . . . . . . . . . . . . . . . . . . . . . . 53.24" (1352 mm) Net Weight: . . . . . . . . . . . . . . . . . . . . . 906 lb (411 kg) Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HP (1.5 kW) The Urschel® Model GRL is designed specifically for strip cutting plain and crinkle cut potato strips. Transverse fracturing and feathered edges of french fry pieces are minimized and longer cuts are produced with greatly reduced scrap. The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Maximum product infeed is 9" (229 mm) in length.

Condition: new, ROBOBlast: Automated Precision Sandblasting Experience the power of ROBOBlast, our state-of-the-art robotic sandblasting system designed for precise, efficient, and consistent surface preparation. Perfect for industrial applications requiring high performance with minimal human intervention. ROBOBlast: Robotic Sandblasting Solutions The ROBOBlast system offers a highly efficient and precise robotic sandblasting solution tailored to the needs of modern industry. Engineered for performance, it automates surface preparation, ensuring consistent results with minimal human intervention. This system is the ideal choice for companies looking to optimize their surface treatment processes. Iijdpfswf Dr Uox Aa Esd Precise and Efficient Surface Preparation ROBOBlast delivers consistent sandblasting performance on a variety of surface types and materials. Automation enables greater accuracy and consistency, eliminating the variability that can accompany manual operations. Whether for small or large projects, ROBOBlast ensures high-quality surface preparation every time.

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. Iodpfx Aowf Dmxoa Eeid A key criterion is the transport of workpieces for painting and further processing steps. Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Iedpfx Aeun R Ufoa Eeid Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions Ijdpfoun Shgjx Aa Eeid The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Year of construction: 2001, condition: used, Fully automatic infeed system for dovetail cutter Table width max. 620 mm Spindle feeder Automatic length sorting, 3 lengths Package forming, 3 x Buffer Package turner Package destacking Manual infeed Buffer before the zinc coating system with 6 compartments Specification: Wood input length: min. 150 mm max. 600 mm Wood cross-section: min. 20 x 40 mm Isdpfx Aaoh Icimj Ejid max. 80 x 180 mm Performance: 6 milling tables/min Working height: 960 mm Table width: 620 mm System width: System length: See pictures System is immediately available, already dismantled.

Condition: new, Year of construction: 2026, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! Iisdpfx Asfcdnlja Ejd The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide.

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t Iedpfx Aaev Hhrvs Ejid dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Iiodpfozinzljx Aa Eed Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: used, Year of construction: 2021, Stamping Press Manufacturer: Bruderer AG, CH-9320 Frasnacht, Switzerland Type: BSTA 1600-181 Serial number / Commission: 14073 Year of manufacture: 2021 Press force: 1,600 kN (160 tons) Press control type: B2 Connected load: 99 kVA Supply voltage: 400 V / 50 Hz Pneumatic connection: 7–10 bar Clutch and brake system pressure: 4.3–5.8 bar Max. stopping time: 250 ms Total weight: 33,020 kg Control panel: Bruderer touchscreen HMI Secondary display: Nidec / SYS PCS 100-P-C Sound-insulating enclosure (red/orange) Tool stroke counter: 11,983,110 (as displayed) UVV safety inspection by Bruderer: September 2025 – no defects found Iisdpfx Aaszil Trj Esd Strip Feeding Line Manufacturer: Kohler Maschinenbau GmbH, Lahr, Germany Type: BZA ABH 2000.2H – KRS 18.260/19 – BF1 Machine number: 41000 Year of manufacture: 2021 Connected load: 10 kW Supply voltage: 400 V, 50 Hz Feed type: BBV 300 Motorized decoiler with yellow safety enclosure

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ijdpfxszil S Is Aa Ejid Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Year of construction: 1977, Stamping Press Manufacturer: Bruderer AG, Arbon, Switzerland Type: BSTA 110 Serial number: 4343 Year of manufacture: 1977 Press force: 110 tonnes Stroke rate: 100–850 strokes/min Stroke (adjustable): 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment: 89 mm Max. tool installation width: 1,170 mm Max. strip feed width: 400 mm Strip feed height above clamping plate: 80–180 mm Bed opening: 1,120 x 400 mm Connected load: 50 kW Supply voltage: 3 x 380 V AC, 50 Hz Control voltage: 24 V AC Compressed air connection: R ½", 6–10 bar Machine dimensions (H x W x D): 3,930 x 3,320 x 2,250 mm Total weight incl. strip feed: approx. 24,600 kg Strip Feed Unit Manufacturer: Bruderer AG, Arbon, Switzerland Type: BBV 320/200 Max. feed: 200 mm Max. strokes/min: up to 1,000 (feed-dependent) Accessories Iisdszil Suspfx Aa Ejd Kohler unwinder Heспо straightener SYS PHS 5000 Sound-insulating enclosure (orange)

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), Ijdemu Rtuopfx Aa Esid LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *