Used Nko Anfassystem Uz15 Rapid for sale (3,812)

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm Hedpezugf Tofx Ahget feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC OİMF+, controller model: 2025, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, rotary table diameter: 630 mm, overall weight: 27,000 kg, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool length: 630 mm, tool diameter: 250 mm, MAKINO A88 HORIZONTAL MACHINING CENTER Control System: Fanuc Oi-MF Plus 15" Touchscreen All electronic components, servo motors, and drives were completely replaced with a Fanuc system in 2025. The mechanical components have only 2 years of working time. Specifications: Pallet Size (2): 24.8" x 24.8" (630 mm) X-Axis Travel: 35.4" (900 mm) Y-Axis Travel: 31.5" (800 mm) Z-Axis Travel: 38.2" (970 mm) B-Axis Rotation: Full (360,000°) Hodpfsyy Dhfsx Ahget Spindle Speed: 20 – 12,000 RPM Spindle Taper: HSK100 Spindle Motor: 40 HP Automatic Tool Changer: 60 tools Pallet Changer: 2 Power: 380 V; 3 Phase; 60 Hz Full Load Current: 139.8 Amp Approx. Dimensions: 227" x 144" x 124" Approx. Machine Weight: 27 tons Features: 4th Axis Pallet Indexing Through Spindle Coolant and Air Shower Coolant and Spindle Nozzle Coolant Wash Guns and Pump Spindle Lubrication Unit Hydraulic Unit Chip Conveyor Coolant Tank Fully Enclosed Cutting Area Tool Life Management Rapid Traverse Speed: 50 m/min Z-Axis Dual Ball Screw Y-Axis Dual Ball Screw Capable of tool change and operation with 630-size fixtures All maintenance has been completed.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 1,800 mm, grinding width: 850 mm, total height: 2,955 mm, total length: 6,650 mm, total width: 3,645 mm, grinding height: 750 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 5 m/min, grinding wheel diameter: 457 mm, table load: 2,160 kg, grinding wheel width: 203 mm, spindle speed (max.): 1,400 rpm, overall weight: 13,000 kg, grinding spindle motor power: 30 W, travel distance X-axis: 1,820 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 820 mm, rotational speed (max.): 1,400 rpm, WORKING CAPACITY: Max. grinding length: mm 1.800 Max. grinding width: mm 850 Max. grinding height: mm 750 GRINDING WHEEL HEAD: Power: kW/HP 30/22 Grinding wheel dimensions: mm 457 x 203.2 x 100 Grinding wheel speed: rpm 1.400 LONGITUDINAL TABLE AXIS: Speed: m/min 1 ÷ 40 Maximum load (with magnetic table): kg 2.160 Hodpfx Aeztzyvehgot Grinding table dimensions: mm 1.800 x 600 Working stroke: mm 1.820 TRANSVERSE GRINDING HEAD AXIS: Rapid traverse speed: m/min 5 Adjustable incremental feed: mm 1 ÷ 50 Continuously adjustable feed rate: mm/min 0 ÷ 2.000 Minimum working increment: mm 0.001 Working stroke: mm 750 VERTICAL GRINDING HEAD AXIS: Rapid traverse speed: m/min 1.5 Minimum working increment: mm 0,001 Working stroke: mm 820 OVERALL DIMENSIONS: Length: mm 6.650 Width: mm 3.645 Height: mm 2.955 Total weight: kg 13.000 Machine complete with: • Instruction manuals and CE Declaration of Conformity

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Hodpowid Spjfx Ahgjt Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, functionality: fully functional, machine/vehicle number: NRX20151106, turning diameter: 150 mm, spindle motor power: 7,500 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,000 mm, spindle nose: JIS A2-5, overall weight: 5,600 kg, CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Hodpfszuauzox Ahgjt Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 300h Spindle-hours. Technical details / additionals / accessories number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Boring bar capacity: 50 mm Hsdpozukn Eefx Ahgot Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm weight of the machine ca. 18000 kg total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Hjdpfxex Tu Suo Ahgot Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 rpm feeds - cross 0,001 - 1000 mm/r feeds - longitudinal 0,001 - 2000 mm/r rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm Hjdozr Hdqopfx Ahgjt tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm Hodpjyif Nrefx Ahget ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm Hodpfx Ahju Rt I Isgst quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Hedpfoxukppox Ahgjt Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: new, Year of construction: 2025, functionality: fully functional, With a grinding diameter of 200mm x 300mm long, the JHP-2003CNC is the most compact plunge type grinding machine in the range and utilises the FANUC Oi-TF CNC control. Designed for heavier grinding applications, the JHP-2003CNC can accomadate workholding and components to 80kgs. This fully enclosed machine is supplied with Renishaw probing, full machine enclosure and mist collector. Jainnher CNC Plunge Cylindrical Grinding Machine Description: JHP-2003 CNC Capacity Max ø work swing 200mm dia Max grinding length 300mm Max grinding dia. 200mm dia Max workpiece weight 80 kgs Distance between centres 300mm Centre height 100mm Grinding wheel Grinding wheel size Ø405 x 50 x 127 Max peripheral 33 m/sec Wheel speed 1780rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 220mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Hydrodynamic pressure ----- Tailstock Retraction of sleeve 30mm Sleeve diameter D:48mm Centre taper MT.3 Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT3 Spindle type Cartridge type Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Hedponxk N Sefx Ahget Swivel angle CCW/CW +10º/-3º Rapid traverse speed 8mm/min Max. travel 640mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 5HP 4P(opt. 7.5HP) 4P Workhead motor 1.0KW Work table (Z axis) 1.2KW Work table (X axis) 1.2KW Hydraulic pump 1/4 HP 4P Wheel head pump ----- Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 30L Wheel head lubrication ----- Coolant tank 80L Machine N.W (Fully enclosed) 3800 kg G.W (Fully enclosed) 4100 kg Dimension (Fully enclosed) 3300 x 2100 x 2200mm Packing (Fully enclosed) 3500 x 2200 x 2200mm Jainnher CNC Plunge Cylindrical Grinding Machine Standard Accessories: JAINNHER JHP-2003CNC X-axis linear scale Work lamp Foot pedal Angle adjustment gauge Hydraulic tailstock with manual movement Grinding wheel and flange Tungsten carbide tipped centres (MT3) Automatic lubrication system Diamond dresser at lower worktable Magnetic separator MC-40/coolant tank/pump Levelling bolts and blocks Tool kits and toolbox Fully enclosed splash guard & oil mist device Touch probe gauge (Renishaw) Transformer

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Hedpow H Aw Sofx Ahgst Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Hjdpsztpxmefx Ahgot

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 350 mm, overall weight: 2,300 kg, input voltage: 380 V, Equipment: documentation/manual, We can offer you, without obligation, ex warehouse, subject to errors and prior sale: H E R M L E CNC-controlled universal tool milling machine with 4th axis Type UWF 600 CNC (HDH TNC 425) Year of construction 1995, new LCD monitor, 1 year old Table travels: longitudinal X 400 mm Vertical Z 350 mm Milling slide travel, transverse Y 330 mm Table size 630 x 335 mm Spindle mounting SK 40 Spindle speeds in 3 stages, vertical/horizontal 40 – 6,000 rpm Arbor stroke, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Hedpfjztl H Tjx Ahgot Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special equipment Automatic tool changer • HEIDENHAIN 4-axis control system Type TNC 425 with graphics and various subprograms, mobile electric handwheel Vise, 2 tons clamping force • Vertical head can be easily swiveled away for using the horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different collets, • Separate control cabinet, separate coolant system, • Central lubrication, ammeter, etc. Machine comes from a training workshop, from 1995 to 2014, has been in our possession since then and has been used very little. Table with tool spindles is included. Condition: good – ready for demonstration, monitor of the HDH control system has been replaced. Delivery: immediately, machine is already on a pallet, ready for transport, but can be demonstrated at any time. 12-ton forklift truck available.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Hedpsyrrx Ujfx Ahgjt Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 40 mm, spindle speed (max.): 8,000 rpm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Turning diameter: 40 mm Turning length: 50 mm Travel range X-axis: 180 mm Travel range Z-axis: 200 mm Rapid traverse rate X/Z-axis: 15 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Fanuc 0i-TD Dimensions & Weight Footprint: approx. 1,500 × 700 × 1,600 mm Machine weight: approx. 1,500 kg Hodezul Srjpfx Ahgst

Year of construction: 2011, condition: ready for operation (used), - USED - DRILLING-MILLING MACHINE LONGITUDINAL TRAVEL: 3250 mm TRANSVERSAL TRAVEL: 500 mm VERTICAL TRAVEL: 1500 mm W-AXIS: 500 mm RAPID FEEDS: 8 m/min MIN DRILLING DIAMETER: 5 mm MAX DRILLING DIAMETER: 50 mm MAX DRILLING DEPTH: 2000 mm DRILLING REVOLUTION SPEED: 4200 rpm HEAD: ISO 50 ; ±20° ; 17 kW TABLE SIZE: 2500 x 2000 mm MAX ADMITTED LOAD: 50000 Kg Hedpjwt Er Sjfx Ahgst HIGH PRESSURE COOLANT: 80 Bar TOOL MAGAZINE: 20 POS CONTROL UNIT: HEIDENHAIN TNC 530 WEIGHT: 45000 Kg OVERALL DIMENSIONS: 6000 x 8000 x 4300 mm ACCESSORIES: SWARF CONVEYOR ; LINEAR SCALES ; PORTABLE HANDWHEEL NOTE: MAX ADMITTED LOAD ON ROTARY AND SHIFTING TABLE FOR ROTATING PIECE 30.000Kg; GUNDRILLS WITH ADAPTER BUSHES; RAPID CLAMPING PLATE 2200X2500X70 mm

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Complete with extended daylight and stroke Pr200 200 x 4100 Make: Bystronic Hedpfx Ajzcw Uvshget Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: used, mileage: 18 km, power: 125 kW (169.95 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 02/2028, color: white, emission class: euro6, suspension: air, number of seats: 3, loading space volume: 20.3 m³, loading space length: 4,200 mm, loading space width: 2,240 mm, loading space height: 2,240 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, soot filter, traction control, Navigation via smartphone possible. Wind deflectors, air conditioning, central locking with remote control, heated exterior mirrors, electric windows front, on-board computer, cruise control, multifunction steering wheel, parking assist rear, reversing camera, spare wheel in driving condition, summer tires, light and rain sensor, LED daytime running lights, fog lights, radio with Bluetooth hands-free system, touchscreen, USB ports, Apple CarPlay, Android Auto, long wheelbase, air suspension rear axle, heat-reflecting glass, storage package, rev counter, airbag driver side, anti-lock braking system (ABS), traction control (ASR), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, start/stop system, diesel particulate filter, service booklet maintained, immobilizer, side marker lights, outside temperature gauge, power steering, low-frame box body with side loading door on the right, lashing rail floor anchoring, LED cargo area lighting, fold-out rear step, double passenger seat multifunctional, permissible total weight 3.50 t, daytime running lights, gear shift indicator, interior filter: pollen filter, storage compartment, electronic brake force distribution, brake assist, steering column (steering wheel) adjustable in height, electronic stability program (ESP), generator 185 A, body/superstructure: box body, wheelbase 4215 mm, drive type: front-wheel drive, transmission 6-speed. Financing example * Cash price: 50,873.00 Euro * Down payment: 10,175.00 Euro * Term: 60 months * Net loan amount: 40,698.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 47,555.00 Euro * Monthly rate: 793.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for whom the car dealership acts as a loan intermediary in an advisory capacity. Subject to creditworthiness. The information also corresponds to the 2/3 example according to § 6a Abs. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will also take your old vehicle in part exchange. Retrofitting possible for: - Trailer couplings, also up to 3500 kg - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear-view camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift and other individual solutions for your business needs possible for an extra charge. Hedpfx Aeyhwzwohgst

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) Hjdpszu Nhwjfx Ahgot -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: excellent (used), ROMI GL 240 2 Axis CNC Lathe Swing over Z axis cover mm 420 Maximum cutting diameter mm 300 Maximum cutting length mm 400 Travel (X axis) mm 188 Travel (Z axis) mm 400 Spindle nose ASA A2-5" Spindle hole diameter mm 58 Bar capacity (dia.) mm 51 Hodpfx Ajzu Nggjhgjt Speed range rpm 6 to 6000 Rapid traverse (X & Z axis) m/min 30 Number of stations atc 12 AC spindle motor hp/kW 20/15

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Hjdpfxszu Ixne Ahgot Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Hodpfx Ahezu Htdeget

Condition: used, Year of construction: 2000, Technical details: Hedpfx Aou Ixwiohgjt turning diameter over bed: 600 mm turning dia. over face-slide: 260 mm turning length: 610 mm facing movement (x-axis): 160 mm longitudinal traverse (z-axis): 610 mm control: Siemens 810D revolution per minute: 1 - 6300 steples U/min max. torque on the spindle: 86 Nm spindle passage: Ø 42 mm external spindle dia. in forward position: Ø 80 mm feed motor: X/Z: 5000 / 7000 N rapid motion - x-axis: X/Z: 16 / 20 m/min tool turret - number of stations: 12 / VDI 30 tailstock taper ISO: MK4 tailstock adjustment: 500 (Hub) mm Main spindle capacity: 7,5 (100%=11kW) kW electrics - voltage/frequency: 3/PE ~ 400V und 50/60Hz V/Hz total power requirement: 20 kVA (11 kW) Weight approx.: 4,0 t dimension machine approx.LxWxH: 3,0 x 2,0 x 2,1 m Further technical specifications: C-axis Distance main spindle - tailstock: 805 mm Power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Coolant device, coolant supply via tool turret Switch cabinet with cooling, Rittal type SK3393100 Workpiece collecting tray Machine lighting Accessories: 1x driven tool i.D. *