Used Mitsubishi Electric Fa20Vs for sale (27,970)

Condition: excellent (used), Year of manufacture: 2015 Fpedpfotu Hunsx Aaljg Model: RV-7FL-D1-S15 Axes: 6 Payload: 7 kg Serial number: FG507070R

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Model: RV-7FL-D1-S15 Fpjdjyu H Ebspfx Aalsg Axes: 6 Payload: 7 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 62,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) Fsdpewptfrefx Aalspg LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: like new (used), Year of construction: 2025, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 01/2025, Large-format laminator for laminating materials from roll. The machine is adapted for coating PVC tarpaulins. New machine from 2025, used 3 times for testing purposes only. Machine dimensions: 4200x1200x1400 (LxWxH). Fpsdpfsyxfqljx Aaljg Weight: approx. 600 kg. Production capacity: 30 linear meters/hour. Lacquer application: forced via 24V peristaltic pump up to 20L/h. Capable of coating products up to 3.2 m wide. Machine equipped with a strip of IR emitters (12 pcs) for lacquer drying, a blower strip for product cooling, and thermocouples for temperature measurement. Tension regulation of the material is managed by pneumatic reducers. Media: power supply 3-phase/64A/5-pin plug, installed power up to 10kW, compressed air up to 4 bar. Machine under warranty, CE Machinery Directive compliant. User manual available. Machine is connected to utilities and can be tested on-site.

Condition: used, Year of construction: 1998, x-travel 650 mm y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 Fpjdpfoythawox Aalog b-axis 360 1° rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained.

Condition: good (used), PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control Modicon Fsdpjxn Nm Hsfx Aaljpg -Output module: Type: Modicon TM3DQ16T 1 pc. -Input module: Modicon TM3AI8 3 pcs. -Trigger module: Modicon TMAQ4 2 pcs. -Shipping/Price: complete -Dimensions total: 150/90/H90 mm -Weight: 0.7 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Control: Mitsubishi - Advance - CNC EQUIPMENT Cutting in water bath Automatic wire threading Wire chopper Cooling unit Fpedpfxsytfx Ds Aaljg

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Fodpjyr Niqefx Aalopg Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7HAA047, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 14,000 rpm, spindle speed (min.): 140 rpm, quill diameter: 65 mm, rapid traverse X-axis: 4,200 m/min, rapid traverse Y-axis: 4,200 m/min, rapid traverse Z-axis: 4,200 m/min, table width: 550 mm, table length: 1,000 mm, table load: 550 kg, overall weight: 6,500 kg, workpiece weight (max.): 550 kg, MITSUBIISHI M-V4050 Vertical Machining Centre, new 2005, ex aerospace enviroment. Fpsdpfx Aasyr Nh Hjleg Fanuc 16iMB control, with hand controller, 30 position auto tool changer, BT 40 spindle, 14,000 rpm, renishaw probe, thru spindle high pressure coolant, chip conveyor. XYZ axis travels 800 x 510 x 460 mm, table size 1000 x 550 mm. Machine is in excellent condition. Vice and tooling not available.

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Fpsdoywftkepfx Aalog

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V Fpsdpfox D Ryyjx Aaljg • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: ready for operation (used), Year of construction: 2015, operating hours: 64,348 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi MV 2400S wire EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm. The machine can accommodate workpieces up to 1,050 mm in length and 820 mm in width, with a maximum weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV 2400S machine we have for sale. Contact us for further details. • Maximum workpiece length: 1,050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1,500 kg • Tank length: 1,050 mm • Tank width: 820 mm Fodpfxjylm Sco Aaljpg • Tank height: 305 mm • Automatic wire threading: Yes Additional equipment • Wire feeder with enlarged 25 kg spool

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² Fedpfjx Enknsx Aalspg • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Fpedpfex D Iifex Aalsg Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Fedogf Ix Aspfx Aalepg Very good condition Almost identical linear unit under stock number 59702

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Fsdpfxex Hgg Do Aalopg

Condition: used, mileage: 167,500 km, power: 129 kW (175.39 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 5,905 kg, maximum load weight: 1,585 kg, overall weight: 7,490 kg, tire size: 205/75R17.5, axle configuration: 4x2, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, fog lights, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, district. House, dual passenger bench seat, electric window left, electric window right, air conditioning, ABS (anti-lock braking system), traction control (ASR), automatic transmission, fog lights, leaf spring suspension, lateral aluminum underrun protection, green environmental badge. Body: Refuse collection vehicle with Zöller body type Micro XL approx. 7m³ and Zöller tipping system 0359. The vehicle is currently registered with a permissible gross weight of 8,550 kg, but this can be reduced at any time! Fedpow Spckjfx Aalspg Service work amounting to approx. €3,000 is required! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, MITSUBISHI MR-S11-300-E31 Axle booster Fpjdpfxoypwg Ee Aalog

Condition: used, power capacity / kW volt / V Fpodpsyn Sbzefx Aalog ampere / A revolutions per minute / U/min For sale is a functional MITSUBISHI HA300C spindle motor AC spindle motor

Condition: used, power capacity / kW volt / V ampere / A MITSUBISHI ELECTRIC CORPORATION AC SERVO MOTOR HA200C Fpsdpfxjyn Sbuj Aalog SERIAL: 0Y475

Condition: good (used), machine/vehicle number: EFB 11-20279, Year of construction: 2008, Offer 26065 Technical Data: - Operating hours (read) approx. 4946 h - Load capacity approx. 1600 kg Fpjdpfsyvh Iuox Aaleg - Lifting height up to approx. 3.7 m - Fork length approx. 1150 mm - Fork carriage width 920 mm - Overall height approx. 2350 mm - Total length with forks approx. 3550 mm - Width approx. 1080 mm - Total weight with battery approx. 3000 kg - Sideshift - Charger

Year of construction: 2006, condition: ready for operation (used), fuel type: diesel, Vehicle description Diesel forklift MITSUBISHI FD35N year 2006 lt. Counter 13.347 hours 3,5 tons lifting capacity 2,45 meters headroom 3,70 meters lifting height 42,3 KW Mitsubishi engine - clear view mast - wide fork carriage - twin tires - sideshift - light system - original paint Fpedpji Dnqksfx Aalsg - ready for immediate use Selling price: 10.500,-- net also favorable delivery possible !!!

Condition: used, power capacity // kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m MITSUBISHI ELECTRIC CORP. AC SERVO MOTOR HA300C SERIAL: 0Z137 + TAMAGAWA FA-CODER TYPE: OSE 5KN-6-12-108 Fodpfx Aasymgapolspg

Condition: good (used), Year of construction: 2012, operating hours: 16,060 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, Mitsubishi FG25N Triplo 550 Freelift / Sideshift LPG 2012 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. offers a variable stock of machines, trucks, trailers and attachments. All our units are sold at trade prices under AS-IS conditions without warranty. (see our general terms and conditions) You can make a viewing appointment and/or test drive without obligation. Please call ahead as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 Fedsyt Rh Rjpfx Aalopg 5391 LR Nuland

Condition: good (used), Year of construction: 2013, operating hours: 15,638 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, Mitsubishi FG25N Triplex 550 Freelift / Sideshift / 4th function LPG 2013 Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make an appointment without obligation. Please call in advance as we are not always present. Van de Wert Trading B.V. Fsdpfsyt Rhwsx Aalepg Bedrijfsstraat 3 5391 LR Nuland