Used Marconi Data Systems Inkjet Printer for sale (47,084)

Condition: excellent (used), Here, we offer you a mytron temperature control system TS 1800. mytron temperature control system TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Hnedezdr Edjpfx Agmen Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: Height 1900 mm, Length 3,000 mm • Open top • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Steplessly adjustable blasting speed: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air requirement at 6 bar (L/min): 1200 with 4 nozzles • Connection values: 230/400 V/50 Hz/3x16 A Hnodpfexu Dabox Agmjn

Condition: good (used), Here we offer a Bosch Sigpack Systems unit with a Manz Aico pendant hand programming device. Bosch Sigpack Systems with Manz Aico pendant hand programming device Bosch Sigpack Systems XR31-3 with Manz Aico pendant P51 hand programming device 80017134 Bosch Sigpack Systems Type: XR31-3 Manz hand programming device Type: 80017134 Condition: used Scope of delivery: (See image) Hedpfx Agezdrzrsmenn (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Year of construction: 2021, condition: ready for operation (used), total width: 1,200 mm, total height: 2,300 mm, product length (max.): 1,200 mm, Automation system manufactured in 2021. This AMADA Jupiter System features a PLC controlled micro resistance welding technology with a workspace of 624 × 550 mm and a maximum welding area of 540 × 450 mm. It includes advanced capabilities such as welding automation, vision inspection, and data connectivity. If you are looking to get high-quality battery pack welding capabilities, consider the AMADA Jupiter System we have for sale. Contact us for further details. 40x units of Jupiter systems available (considered as a whole): welding automation includes the XYZ portal control system, welding control, welding monitoring, vision system, and data connectivity. Cooling units are not included. AMADA Jupiter Advanced Battery Pack Welder (2021) General • Model: Jupiter Advanced Battery Pack Welder • Condition: Very Good / Well Maintained • Machine Dimensions: 1,200 × 1,200 × 2,300 mm • PLC Controlled System • ISQ / MNC Welding ControllerMachine Type • Automated Micro Resistance Welding System • Battery Pack / Battery Module Welding SystemWelding Technology • Micro Resistance Welding • Frequency: 10 kHzWorking Area • Workspace: 624 × 550 mm • Welding Area (max.): 540 × 450 mm • Vision Area (max.): 540 × 450 mmPerformance • Welding Cycle Time: 1.8 sec (weld point to weld point) • Vision Inspection Time: 1.2 sec (vision point to vision point) • Operating Hours: range of 5,000–40,000 hElectrical Data • Power Supply: 400 VAC • Main Fuse: 40 A • Power Consumption: 2 kVAPneumatics • Compressed Air Requirement: 6 bar clean dry air Optional Equipment, not included • Robot Loading System • Vision System • SQL Database Traceability • Electrode Holders • Spare Electrodes Optional Robot Loading System General • Application: Automatic Loading / Unloading of Battery Packs • Integration: AMADA Jupiter Welding System • Robot Loading Machine 25Equipment • Automatic Part Handling • Integrated Vision Inspection • Integrated Welding Process Optional: 3x ASIC Robotics Steckautomat V (2022), price on request General • Manufacturer: ASIC Robotics AGApplication • Automatic insertion / assembly of battery cells • Suitable for 18650 cells • Suitable for 21700 cellsCompatible Cell Holder Types • Senec V2 • StreetScooter V6 • Ocado • LightyearPerformance • 1 × 4 cells simultaneously: approx. 1.0 sec/cell • 2 × 2 cells simultaneously: approx. 1.0 sec/cell Hnedpfx Aozdrazogmen • 4 × 1 cell: approx. 1.3 sec/cell • Technical efficiency: 95%Electrical Data • Voltage: 3 × 400 / 230 VAC • Frequency: 50 Hz • Fuse Protection: 25 A • Supply Cable: 6 mm²Pneumatics • Operating Pressure: 6–10 bar • Air Connection: Ø14 plug connection • Air Quality: Dry and oil-freeDimensions • Machine Height ASIC Roboter incl. Signal Tower: 2,720 mmWeight • Approx. 2,100 kgEnvironmental Conditions • Ambient Temperature: +5 °C to +40 °C • Relative Humidity: 45–85% non-condensingNoise Emission • Average Noise Level: 75 dB(A)

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Hnjdpfx Agjy Rlbhomen Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and a CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V895-440 HBT SP Air-Cooled Vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial design Supply voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Controller IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Sliding table / mounting table available Hnodoy Iwp Sopfx Agmsn Vibration-isolated installation Program operation possible Sliding table 760 mm x 850 mm Threaded insert spacing 100 mm Enabled licenses: Excitation types Sine, Resonance Dwell, Limit Control, Amplitude Dwell Multi Sweep Sine, Random, Sine-on-Random PSD Limit Control, Shock Extensions Scheduler, Multi-Language, Launcher, System Monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / controller active Inspection under power possible Scope of delivery LDS V895-440 HBT SP Shaker LDS SPA56K Amplifier IMV K2+ System PC system complete CTS climate chamber Accessories as shown in the pictures Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Here, we offer you a 3DMICROMAC laser marking system. microCUT Enclosure Laser source IPG Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60 Hz Power consumption 51.3 kW Control voltage 24/5 VDC Main fuse NH 100A gG Module: Laser source: Mains voltage 400 VAC Frequency 50/60 Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Operating pressure 6-10 bar Temperature 10-50 °C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Set point tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Set point tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG, Type: YLS-5000, Mode: Continuous wave, Quasi-continuous wave Wavelength 1070nm Power 5kW, Frequency 5 kHz Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60 Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V, Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v, Type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration, Type: DOWNFLO Oval 3-3 Hnjdpfx Agszdqp Iomjn Max. Fan speed 3000 rpm Operating pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: Laser marking system microCUT Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Hnodezdqkrjpfx Agmsn Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Ifsys Type: 114100, Type: VL 13 Hnsdozdp Icepfx Agmen Screw feeding system Hopper system with 2x Vibroliner and 2x Vibrohopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2003, condition: good (used), Conveyor system (outlet) behind e.g. Weinig planing machine Max. wood length 3200 mm, with cross transport With return belt 6000 mm Hodpfx Ajzdplnsgmenn

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) Hnodpfxjzdn T Ro Agmjn (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Hodpfx Agjzdn S Tomsnn Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Hodpfezdn H Rjx Agmsnn Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Hnedpjzdnxgsfx Agmsn Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Stratasys 3D Printer Dimensio elite Here, we offer a Stratasys 3D printer, Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of Stratasys’ Design Series. The Dimension Elite printer is ideal for printing 3D prototypes and for modeling functional components, such as medical devices, mobile electronic devices, or precision instruments. With a simple click on “Print,” the CAD file is prepared, and the printing process is started. After easily removing the soluble support material, a precise and highly detailed component is revealed. Manufacturer: Stratasys Type: Professional operation Material(s): ABS Technology: Fused deposition modeling Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Layer thickness (µm): 178 Speed (mm/s): - Hodpfxjzdnpro Agmsnn Precision (µm): - Filament thickness (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A on a dedicated circuit Type: Dimensio elite Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. Hodpfxszdnple Agmsnn What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Stratasys 3D Printer Dimension Here we offer a Stratasys 3D printer, Dimension model. Stratasys 3D Printer Dimension The Dimension 3D printer is part of Stratasys' Design Series. Manufacturer: Stratasys Type / Printing Technology: FDM (Fused Deposition Modeling) Build Volume: 20.3 x 20.3 x 30.5 cm Printable Material / Filaments: original ABSplus spools, or other ABS or HIPS materials Dimensions and Weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build Platform: Plastic; reusable Software / File Types / Operating Systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special Feature: ideal for complex 3D models with a resolution of 0.178 mm or 0.25 mm layer thickness. Type: Dimension Condition: used Scope of Delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone. Hnodpfjzdnpfox Agmsn

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer an untested ProJet 3D printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Printing Modes: HD – High Definition UHD – Ultra High Definition Net Build Volume (xyz) HD Mode: 298 x 185 x 203 mm UHD Mode: 127 x 178 x 152 mm XHD Mode: n/a Resolution: HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD Mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimension Accuracy depends on build parameters, part geometry, part placement, and post-processor settings. Email Notification: No Build Materials: VisiJet® EX200 Build Material: Durable solid material with a long service life VisiJet® SR200 Build Material: Cost-effective multipurpose material. Available in natural, blue, or gray VisiJet® HR200 Build Material: Available in blue, specifically developed for investment casting applications Support Material: VisiJet® S100 Support Material: Non-toxic wax material for melting away the supports without manual intervention Power Supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (LxWxH): Printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and machining optimization tools Extensive part file editing tools Automatic support generation Job statistics Network Compatibility: 10/100 Ethernet interface Hnodpezdnnujfx Agmjn Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating System: Windows XP Professional, Windows Vista, Windows 7 Supported File Formats: STL and SLC Ambient Temperature: 18-28 °C Noise Level

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Hnjdpfx Aey Si Aljgmen Features and technical specifications: - Motor 400V-50Hz-3Ph, 1.5 kW - Pneumatic single-head boring machine with 23 spindles - Aluminum fence with 4 stops (2 profiles each right/left, 1500 mm each) - Equipped with quick-change chuck - 2 patented accident-safe pneumatic clamping cylinders - Connection for dust extraction unit according to EU standards - Aluminum boring beam with spindle spacing of 32 mm - Worktable made of MDF and cast iron - Patented spiral system for fine adjustment of drilling depth - Pneumatic drilling head swiveling with lock at any position between 0° – 90° - Foldable side stops with fine adjustment via mechanical counters with decimal display - Drill height setting via mechanical counters with decimal display - Rear fence, travel up to max. 300 mm - Fixed stops at 37 mm for insertion of concealed hinge drill bits - Complies with EU standards - Max. drilling width: 704 mm - Max. drilling depth: 65 mm - Max. workpiece width: 960 mm - Max. workpiece length: 3000 mm - Max. workpiece thickness: 60 mm Availability: short notice Location: 63934 Röllbach

Condition: used, Oil Mist Extractor, Emulsion Mist Collector, LOSMA AS.7 Oil Mist / Emulsion Mist Separation Unit – Aspirofilter (2000), Used Machine Manufacturer LOSMA S.r.l. (Curno, Bergamo, Italy) Model AS.7 Overall Dimensions Width: 540 mm Depth: 580 mm Height: 610 mm Technical Specifications Year of Manufacture: 2000 Hedpfezdgawox Agmonn Type: Oil Mist and Emulsion Mist Extraction Unit Series: Aspirofilter Condition: Used machine. Manufactured in 2000. Filter replacement required. Suitable for industrial oil mist and coolant mist filtration applications.

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Description Professional hydrogen leak detection system consisting of the INFICON Sensistor ISH2000, INFICON TGF10 tracer gas filler, and AP57 search probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical data Power supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Printer port Probe control port TGF10 Tracer Gas Filler Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Weight: approx. 4.7 kg Equipment Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application areas Leak testing of pipelines Hsdpfxszdggws Agmonn Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing systems Condition Used Optical condition as shown in the pictures Display active Normal storage and usage marks present Scope of delivery as shown in the pictures. Changes and errors in the technical data as well as prior sale are reserved.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 Hedozdd Avopfx Agmsnn • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: excellent (used), 1 used, very well-maintained universal milling head, System "HURON", with hydraulic tool clamping and a blow-out function for cleaning the taper socket. Manufacturer: EMENA - MTE, Origin: Spain Model: VAR 3 - BF, BM, COMPACT Technical data: Spindle mounting: DIN 69871 SK - ISO 50 Overhang: 358 mm Max. speed range: 3000 rpm Max. drive power: 22 kW Mounting flange: Outer diameter: Ø 306 mm Hedpfxezdbxbo Agmsnn Dimensions L x W x H: 460 x 306 x 360 mm Weight: approx. 150 kg Accessories / Special features: • 2 swivel table system "HURON" • Hydraulic tool clamping • Blow-out function for cleaning the spindle socket • For retrofitting to conventional, NC or CNC milling machines and panel saws or drilling machines (e.g.: MTE, LAGUN, CORREA, ZAYER, CME, ANAYAK, AYCE, SACEM, JUARISTI, UNION, ARSENAL, AUERBACH, ...) This high-quality milling head was used as a loaner milling head and was only used for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), mileage: 373,350 km, power: 390 kW (530.25 HP), first registration: 04/2023, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,000 mm, total width: 2,550 mm, total height: 4,070 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors Hnjdpfx Asy Irk Rogmen - Digital tachograph - Trip recorder (control unit) - Fixed - High roof - Manual - Radio/cassette - Lane keeping assist - Fabric - Blind spot sensor - Xenon lamp - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Unladen weight: 10010 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 630 liters, Trailer coupling, Axle journal diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of differentials: 1, Suspension type: Full air, Cabin type: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Blue, Heated mirrors, Mirror camera, Lighting type: Xenon lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 390 kW (523 Hp), Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Starter battery, Body construction year: 2023, Rotation direction: 1x20, System length: 100 cm, System type: Spier 8KRsdg, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, LAST AXLE STEERING / VOITH OIL RETARDER / WHEELBASE 490 / LED / NAVI / MULTI WECHSLER Transmission Transmission: MB, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inner: 3 mm; Tire tread depth left outer: 3 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 3 mm Axle 3: Tire size: 315/70R22.5; Lift axle; Steered; Tire tread depth left: 11 mm; Tire tread depth right: 8 mm Weights Unladen weight: 10,010 kg Payload: 15,990 kg GVW: 26,000 kg Functional Loading platform height: 112 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: €1,156 per month (default, 72 months); Please inquire about further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands, models, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website.

Condition: used, mileage: 820,347 km, power: 375 kW (509.86 HP), first registration: 12/2016, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x2, wheelbase: 4,600 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 8,400 mm, total width: 2,550 mm, total height: 3,200 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Hydraulic system - Short cab - Manual - PTO (power take-off) - Pump - Radio/cassette - Reversing camera - Seat cover Number of axles: 4, configuration: 8x2, unladen weight: 13,475 kg, gross weight: 35,500 kg, total tank capacity: 300 liters, trailer hitch, king pin diameter: special, fifth wheel: fixed, number of differentials: 1, suspension type: full air, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, reversing camera, lighting type: halogen, climate control, heated seats, Bluetooth, flashing lights, engine power: 375 kW (503 HP), fuel: diesel, Euro: 6, gear type: I-Shift, transmission: Volvo, gears: 12, power steering, ABS, ASR, hydraulic system, PTO, PTO type: 1, starter battery, system length: 570 cm, pump, hook device height: 139, central locking, seating arrangement: 1+1, seat cover: seat cover, seat adjustment: manual Transmission Transmission: VOL, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 385/65R22.5; steering axle; tire tread left: 8 mm; tire tread right: 10 mm Axle 2: Tire size: 385/55R22.5; lift axle; steering axle; tire tread left: 9 mm; tire tread right: 3 mm Axle 3: Tire size: 315/80R22.5; twin tires; tire tread left inside: 14 mm; tire tread left outside: 4 mm; tire tread right inside: 5 mm; tire tread right outside: 8 mm Axle 4: Tire size: 385/65R22.5; lift axle; steering axle; tire tread left: 7 mm; tire tread right: 3 mm Weights Kerb weight: 13,475 kg Payload: 22,025 kg Gross vehicle weight: 35,500 kg Functional Loading platform height: 127 cm Pump: yes Condition General condition: average Hedpfey A Emhox Agmsnn Technical condition: average Visual condition: average Damages: none Number of keys: 2 Identification License plate: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognized quality • Competitive prices • Professional conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognized quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask about our European warranty package directly.