Used Lundberg Wastetech 400 for sale (18,165)

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication Hodpfx Aeydittjhgst - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° - 1 new saw blade

Condition: used, mileage: 749,000 km, power: 294 kW (399.73 HP), first registration: 03/2007, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Trailer coupling - Articulated push-arm suspension: leaf/air Hjdpfx Ahsx Tc Spsgjt

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Hedpfx Aswx Hz Ejhget Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G Hedpfx Ahowhvrreget 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 63 kVA, input current: 2 A, type of output current: AC, output voltage: 110 V, Equipment: documentation/manual, 63kVA transformer for sale 3x400V -> 1x110V Manufacturer: Trafó-Print Kft. Type: TZ 63 000 Power: 63kVA Hedow Ev Ihjpfx Ahgjt Primary: 3x400V Secondary: 1x110V

Condition: used, mileage: 90,328 km, power: 294 kW (399.73 HP), first registration: 06/1997, fuel type: diesel, empty load weight: 13,000 kg, maximum load weight: 13,000 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,850 mm, next inspection (TÜV): 04/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, number of seats: 2, Equipment: all wheel drive, cabin, cruise control, differential lock, hydraulics, parking heater, seat heater, trailer coupling, Vehicle location: Bovenden, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, radio, cruise control, 12-speed switch, differential lock, leaf suspension. Wheelbase: 3850 mm. We assume the mileage is 1,090,328 km. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hedpjx Hapfefx Ahgst

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x blue Euro container Dimensions: 400x300x210mm Model: TK400/210 - Minimum order is 3 pallets (120 boxes)! Very clean, the boxes have only been used indoors and for storing clothes and packages! Hjdovu Du Ajpfx Ahgjt Shipping only possible from 5 pallets (200 pieces) for an additional charge. A total of 1200 boxes are currently available.

Condition: used, mileage: 124,525 km, power: 235 kW (319.51 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 15,000 kg, maximum load weight: 11,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, AS-Tronic automatic, differential lock, fog lights, rotating beacon, air suspension, low-noise G1, lift+lower, last axle liftable, last axle hydr. steered, U-protection, aluminum side bumpers, roof hatch, green environmental badge Wheelbase: 3900 mm Superstructure: VDL Translift E-Maxx FS side-loader refuse collection body ZF 6 HP 602 i=5.6-0.83 transmission with retarder and EST146, MAN BrakeMatic, M cab, tank capacity: 200l. Hjdpfxovhirmo Ahget The engine power can be increased to 400 hp! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 1994, I will sell a Tampoflex Jumbo 150-400 pad printing machine, manufactured in 1994. Functional and in good condition. Hjdov Eqatjpfx Ahgjt

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Hjdpfevxp N Tjx Ahgjt -Manufacturer: KED Kurt Ehemann, grinding drum drum width 400 mm -Drum: Ø 100 mm -Hole: Ø 30 mm -Number: 3x drum available -Price: per piece -Dimensions: Ø 100 x 400 mm -Weight: 7.7 kg/piece

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1650 mm Hedpfx Ahsv A Hdijgst Weight 440 kg Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2860x1120x1140 mm Hedpfsvz E Spex Ahgst Weight 1260 kg Total power requirement 19 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1900x1000x1250 mm Weight 800 kg Total power requirement 12,5 kw Hodovz Hr Ropfx Ahgot

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg Hodpfx Aeg Si Npjhgot

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm Hjdpfx Ajg U Nbmohgot -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

Condition: used, Bench grinder, bench grinder, pedestal grinder, pedestal grinder Hjdpfxeldk Irs Ahgjt -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Hodpfx Aji Ri I Nshgot Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg Hodpfxomhmxxo Ahgjt

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Hsdsmxkggjpfx Ahgjt Gouging (up to Ø 6.5 mm).

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, Hsdpfxjt U R Hzj Ahgst collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg Hodpfoqrwxpsx Ahgot

Condition: used, Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 1.65 m on a solid base frame, height adjustable -Roll width: 400 mm -Roller diameter: 57mm -Roller spacing: 195 mm -Height: 655 to 1140 mm, one foot is missing -Transport dimensions: 1650/500/H655 mm -Weight: 27 kg Hjdpfx Aeqzl Hmehgjt

Condition: used, Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder Hedpfx Asq Adpuehgjt -Manufacturer: Hohner, Encoder rotary encoder -Type: 10 23651 400 -Shaft: Ø 6 x 10 mm -Quantity: 1x encoder available -Dimension: 80/58/H69 mm -Weight: 0.5 kg

Condition: used, Year of construction: 2009, functionality: fully functional, CONTUR MSL-400 Compact and powerful for flexible use: fast servo turret, (VDI-30) with 12 tools 700 mm turning length 52/74 mm bar capacity Robust roller guides CNC controls: SIEMENS, Hsdpfx Aju Rtp Eehget compact dimensions

Condition: good (used), Year of construction: 2004, functionality: fully functional, Griggio CA 400 sliding table saw Year of manufacture 2004 S/N MC 00071750 Cutting length aluminum sliding table: 3200mm Double roller on the outside mechanical height and tilt adjustment motor power 5.5 kw main blade diameter 400 mm with scoring saw blade 3 speeds: 300/400 / 600 rpm Machine according to CE standard Hsdpfx Aetpv Abshget Weight 820 kg