Used Long Belt Grinder for sale (15,538)

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Gsdeyhzhbjpfx Ag Roiu Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredding material, granulate, etc. Aluminium angled conveyor belt incl. mobile frame Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at bend: 40 degrees each Infeed height from floor: 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminium construction, heavy-duty version! PU conveyor belt incl. cleats and corrugated sidewalls Drive: Motor 0.55 kW (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection class Drive etc. ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch 2-ply, especially cross-stabilized Sidewalls and cleats, as well as belt, are endlessly high-frequency welded In the angled section, the belt is guided on both sides by 4 hold-down rollers each. Gsdeyt Ia Dopfx Ag Reiu The belt is produced with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 400 mm, calculated as follows: (top view) lateral arrangement 100+50+400+50+100 mm Demo unit - Available immediately! - Can be viewed under power All prices are net prices plus 19% VAT All information without guarantee, only while stocks last!

Year of construction: 2023, condition: as good as new (ex-display), Flat conveyor belt in steel construction without substructure Conveyor belt length: 4,500mm Conveyor belt width: 600mm PU conveyor belt incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 2 pcs. corrugated edges 80x45mm T60 studs, pitch approx. 250mm 2-layer particularly laterally stable Usable width 500mm, results as follows: Transverse arrangement -45+5-500+5-45mm Support roller construction under the tread Gijdpfx Aei E Stcjg Reu Conveyor frame lightweight square tube frame construction Paint finish: RAL 5015 sky blue

Year of construction: 2018, condition: excellent (used), Aluminum riser conveyor incl. Substructure Godpfxjd Dza Aj Ag Roiu Dim: 4000 x 460 x 1000 / 1700mm Construction: height adjustable Conveyor belt width 400mm PVC conveyor belt incl. Driver and wave edge (NEW) Construction for suspension of the overband magnetic separator. Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 * incl. new bearings, new conveyor belt

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble Gisdpfx Ajyhznnjg Rju • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures, very robust construction. Length approximately 15 meters. Godpezc D T Ssfx Ag Roiu Belt width: 0.65 meters. Transport is possible.

Condition: ready for operation (used), For sale: conveyor belt as shown in the pictures. Gjdpfx Aszc D E Usg Roiu Transport is possible.

Condition: ready for operation (used), The item in my auction is a conveyor belt with a length of approximately 10 meters and a belt width of 0.4 meters. Gisdpfxjzc D Dds Ag Rou Transport is possible.

Condition: used, JONES SHIPMAN 1305 EIU CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1305 EIU CENTRE HEIGHT 185.0 mm Giodpfxoy Hi Epo Ag Rou MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS HEIDENHAIN DRO INTERNAL SPINDLE ATTACHMENT EXTENSIVE RAGE OF TOOLING AND ACCESSORIES RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK CLEAN

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Number of belts: 2 Godpfx Agjy Naq Uo Rsiu Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: used, Stackable Storage Pallet, Long Material Cradle, Used Equipment Manufacturer: Alba Metál Alpin Kft. Year of Manufacture: 2017 Load Capacity: 2000 kg Technical Specifications: Gijdey Ayd Iopfx Ag Rju Overall Dimensions (External): 6000 x 1400 x 750 mm Usable Dimensions (Internal): 6000 x 1230 x 610 mm Weight: 510 kg

Condition: used, Crate, Long Material Storage, used machine Overall dimensions : 6000 x 1290 x 570 mm Giedpjy Aydzjfx Ag Reu Load capacity : 2000 kg Usable dimensions : 6000 x 1200 x 430 mm Weight : 440 kg

Condition: ready for operation (used), Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Godpfx Agev D Hmaj Rsiu Medium/Fluids: Oils and machining emulsions Filter auxiliaries: Optionally with or without filter auxiliaries

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry Gijdpstp S E Eofx Ag Rsu – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: ready for operation (used), Conveyor Belt, Slat Conveyor, Slat Conveyor System, Used Machine Godpfx Aevgw Aqeg Rsiu Dimensions: 4290 x 2100 x 1050 mm Slat Spacing: 300 mm Slat Height: 130 mm Geared Electric Motor: 140 rpm; 400 V; 50 Hz

Condition: good (used), Year of construction: 2009, Manufacturer: NEUHÄUSER Type: 2.224-3 Year: 22/09 Enclosure dimensions: 7270 x 740 x 3400 mm Giedenqyx Topfx Ag Rsu Electrical data: 230/400 V; 380/420V; 11.3-6.5 A; 50Hz; IP54 Discharge height: 3400 mm Delivery length: 6500 mm Shipping width: 640 mm

Condition: excellent (used), machine/vehicle number: 85.1097, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Gsdeih R T Njpfx Ag Reiu

Condition: used, Year of construction: 1995, functionality: fully functional, SCM Sandya 10 SCM 1100 R+R+RT Wide Belt Sander Specifications: • Condition - used, after a comprehensive inspection • Manufacturer - SCM • Model - Sandya 10 • Working width - 1100 mm • Max. working height - 160 mm • 4 sanding units in sequence: - Steel calibration roller - ø 160 mm - Hard rubber roller - ø 160 mm - Combi unit (rubber roller + segmented platen with step function) - Dust removal brush • Main motors with power of 18.5 and 12/15 kW • 2 machine operating speeds (on the second motor) • Infinitely adjustable conveyor speed • Electronic thickness indicator for the sanded part • Oscillation on the optics • Air blow on the 2nd and 3rd units • Possibility of lowering/raising each unit separately • Thickness gauge for the sanded part • Table prepared for a vacuum pump (pump not included) • Abrasive belt size - 2150 x 1115 mm • Dust extraction connections: 4 x 155 mm and 4 x 120 mm • Weight approx. 1,800 kg • Year of manufacture - 1995 Gijdezcy I Eopfx Ag Reu • Overall dimensions 220 x 180 x 210 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to switch on and check the device on-site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing financing

Condition: good (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 3671, power: 0.55 kW (0.75 HP), • Manufacturer: Haarmann • Model: DMPU • Machine type: Universal tool grinding machine • Application: Grinding of drills, milling cutters, turning tools, cutting tools • Design: Compact cast construction, low vibration Motor • Power: 0.55 kW • Speed: 1400–2800 rpm • Voltage: 380 V • Frequency: 50 Hz Grinding unit • Grinding wheel diameter: 125–150 mm • Drill grinding range: approx. 3–20 mm Gisdpfsyvpwqjx Ag Rou • Cutter grinding range: depending on clamping devices • Angle adjustment: manual, finely adjustable • Rests: adjustable, usually on both sides Dimensions & weight • Dimensions: approx. 500 × 400 × 350 mm • Weight: 35–55 kg Year of manufacture: 1967

Condition: used, functionality: fully functional, Machine: Agathon 150 A Tool Grinding Machine Manufacturer: AGATHON (Switzerland) Gisdsypb T Ajpfx Ag Rsu Grinding/Working Data • Grinding wheel diameter: 150 mm • Grinding wheel width: 20 mm • Bore (inner diameter of grinding wheel): 20 mm • Spindle speed: up to approx. 2,500 rpm • Tool clamping range: • Width: approx. 32 mm • Height: approx. 32 mm • Clearance angle adjustment / orthogonal clearance angle: up to approx. 26° Electrical Data • Supply: 3-phase 380 V, 50 Hz • Power: approx. 1.0 HP (~0.7–1.0 kW, depending on source) Mechanical/Dimensional Data • Machine weight: approx. 225 – 300 kg (depending on version/equipment) • Dimensions: • Length: approx. 820 – 850 mm • Width: approx. 564 – 620 mm • Height: approx. 1,215 – 1,200 mm

Condition: used, Year of construction: 1974, Clamping length: max. 635 Distance between centers: 125 Table travel: 400 Maximum grinding travel: approx. 300 Table speed, infinitely adjustable: 30-1000 mm/min Grinding spindle speed, 3 stages: 1750, 2150, 2850 1/min Weight: approx. 1800 kg Gsdpfx Agezcyyne Roiu

Condition: excellent (used), WIDE BELT SANDER BUFFERING SKO 213 CC sanding width 1320 MM 1 combined unit with a metal calibration roller and a sectional platen, 15 KW Gisdpjzcx D Esfx Ag Rou 2 combined unit with a rubber roller and a sectional platen, 7.5 KW Speed of the second unit adjustable via a frequency inverter Minimum current protection 40A pneumatic oscillation The belt has a connection for a vacuum pump Feed speed adjustable via a frequency inverter, 2.5-13 m/min electric height adjustment pneumatic centering of the feed belt Max. sanding height 150 mm The sander is very robust and provides very good sanding quality.

Condition: new, Year of construction: 2025, IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Gedpozcwvmefx Ag Rsiu Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor discharge point, which is especially useful when working with concrete. The conveyor is available in three versions: Fixed Height and Angle Conveyor – a basic model designed for long-term operation at one location. The construction allows additional equipment to be added later, enabling conversion into one of the mobile or adjustable versions. Adjustable Height and Angle Conveyor – a fully mobile solution that allows quick and easy adjustment of conveyor height and angle. The modular base enables easy movement without the need for ground fixing. Automatic Rotation Conveyor – a model equipped with an automatic rotation system that allows quick repositioning of the material outlet without interrupting the production process. Ideal for dynamic construction sites and flexible operation.

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 Giodpfsff Hgbex Ag Rsu drive, motor control optional

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 3000mm flat Dimensions: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Gjdogggkdepfx Ag Rjiu Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional