Used Logitrans Ll1000Te Pile Elevator for sale (1,021)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Lhsdpfjy R Nnfjx Aiioh Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), MBO T535E/4F Folding Machine + Mobile Delivery Machine in very good condition, ready for production. From the first owner. Minimum paper size: 105 x 150 mm Maximum paper size: 530 x 840 mm High pile feeding Equipment: Lhedpfx Aiezgddqjioh MBO T535E-1-53/4-F unit (4 cassettes) Cassette and compressor sound insulation Electronic counter with batching Electric mobile delivery Documentation Tool kit and accessories.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual. Lsdpfx Aozgda Ssiijhh

Condition: used, Year of construction: 2015, Perfect binding line Kolbus KM 600 - ZU 805 - FA 650 - HD 143.P - Kl 301 Year: 2015 Consisting of Gathering machine Kolbus ZU805 Year: 2015 Description: - Hand feeding station: 2 - Number of gathering stations: 24 - ATC thickness control Lhjdpfszf Izqex Aiijh - Optical sheet control - Air center: Becker - Set up element - Reject gate for incomplete products: AS 805 Perfect binder Kolbus KM 600 Year: 2015 Product counter: +/- 25,3 mio Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Pile cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus Year: 2015 Description: - Transport system, length (approx): 45 mtr - Escape delivery - Conveyor tower Front cutter Kolbus FA 650 Year: 2015 Description: - TFT Touch screen - Straight infeed - Throughfeed - Belt delivery Three knife trimmer Kolbus HD 143.P Year: 2015 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 301 Year: 2015 Description: - Semi automatic setting - Compensating stacker - Delivery to the left and right

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator Lsdpfxszf Akge Aiiohh with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: excellent (used), Multi purpose oven with gas and steam heating. 2m wide belt. Superb condition, the best one we have seen of this model. Direct from closed meat free factory. The Revoband oven features precisely controlled vertical hot air directed at the product from above and below the belt. We designed the oven with adjustable fan speed control for each zone to provide unlimited flexibility. Perfectly suitable for chicken fillets, wings & drumsticks, burgers, nuggets, fish sticks, back bacon, sausages, lasagna and other special applications FEATURES & BENEFITS High Velocity air provides consistent color development and uniform cooking results Precise control of temperature and production time for repeatable results Cook with steam and elevated temperature or steam only for process flexibility Indirect heat eliminates by-products of combustion for product zone. Ljdperd Rqksfx Aiiehh

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Lhedpfx Ajlkc U Eeiioh

Condition: like new (used), Rondo line for thin pastry, was set up to produce thin pastry to manufacture samosas but can be used for any fine pastry manufacture. Starts with elevated conveyor, 6 roll dough extruder 650mm wide, various 700mm wide conveyors with guillotines and dusters. Was set up to cut the pastry into 75 x 173mm 8 across, 90 x 213mm 7 across and 110 x 254mm 5 across. We would need to check first if all the sizes are here, not confirmed, just read from the order form. Lins is approx 22m long. All belts have perished, this has been in safe storage for many years as it could not be sold to competitors in the UK. Lodpeh Rwlfjfx Aiijhh

Condition: good (used), Rotary 2 large rack (1m x 1m x 2m) multi purpose oven / protein cooker. Previously used for cooking poultry meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Lhsdpsmrqqdjfx Aiioh

Condition: like new (used), Rotary 2 rack (racks for 18" x 30" trays) multi purpose oven / protein cooker. Previously used for cooking duck meat but can be used for fish, meat, vegetables and ready meals. Can cook with steam only, steam and elevated temperature, dry roast and bake. These are the industry standard in UK ready meals factories. Lsdemrqqtepfx Aiiohh

Condition: used, Year of construction: 2004, Horizon BQ-270 Single-Clamp Perfect Binder, used Experience efficient and precise bookbinding with the Horizon BQ-270. This fully automatic perfect binder offers easy operation, high speed, and versatile applications for your book production. Key Features: - Fully automatic settings for quick setup - User-friendly touchscreen for easy operation - High productivity with up to 500 books per hour - Precise binding with even glue distribution - Versatile format handling for different book sizes and thicknesses - Compact design for space-saving integration - Quick format change for efficient production Specifications: - Book format: max. 320 x 310 mm; min. 135 x 115 mm - Cover format: max. 660 x 320 mm; min. 240 x 135 mm - Book thickness: max. 50 mm; min. 1 mm - Cover weight: 90 - 300 g/sqm - Cover pile height: max. 70 mm - Production speed: up to 500 cycles/h - Dimensions: 2,720 x 910 x 1,545 mm - Power: 400V; 50Hz - 2.7 kW - Weight: 900 kg Ljdpfxey Ec Egs Aiijhh All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2019, operating hours: 14,970 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 283 kW (384.77 HP), empty load weight: 71,320 kg, drive type: Diesel, Full container reach stacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE32 Condition: Ready for use and fully functional Technical condition: good Lhodszfrcfjpfx Aiish Front tire type: Pneumatic Front tire size: 18.00-33 Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire size: 18.00-33 Rear tire condition: 40 - 60% Description: Sold as is, ex works, to save on transport and handling costs. Twistlocks are new. Side shifter, Full cabin, air conditioning, joystick, Piggyback pile slope camera, central lubrication, movable cabin, SOLAS scale.

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar Lhedpfx Aiozfpq Heieh - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: used, “FED” Drum Coater Lsdpozfg D Dsfx Aiishh Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm infeed belt belt width 300 mm Elevating spiral screw

Condition: used, offer consists of: Duplo DPB-500 Lhodpfxjy S R U Nj Aiijh Single clamp binder The machine was used for short run book production for books produced on our digital presses. Advantages: - suction cover feed - 4 creasing - touch screen - milling/ notching Technical Details: - cycling speed: 525 books/h - book thickness: 1-51mm - book size: min. 120x250mm; max. 360x696mm - cover weight: 80-302 gsm - cover pile height: 70mm - milling depth: max. 4mm - warm-up time: 45min - glue temp.: 100-200°C - power supply: 3 phase, 380-415V/ 50 60Hz - dimension: 928x2790x1343mm - weight: 695kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, total length: 700 mm, overall weight: 285 kg, total width: 650 mm, total height: 1,420 mm, electrical fuse: 10 A, input frequency: 50 Hz, empty load weight: 285 kg, Mixing machine Boku - Diosna Model: RS 30 S 2 working functions: 1 x mixing / 1 x beating 1 mixing beater, 1 beating beater 1 25-liter stainless steel tank Working shaft/mixing shaft in new condition Tank lift with fast elevator Mixing machine with tank lighting Simple technology Connection: 400V, 16A-CEE plug Used machine, overhauled & SAB tested with warranty + spare parts service Ledpfxowyrzmo Aiiohh Optional: New stainless steel tank Ring gas burner Service package Delivery service Maintenance contract Training & commissioning We have many more mixing machines in stock!

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers Lhodpfxozdzprj Aiioh - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations)

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! Ledpfezgf A Uox Aiishh The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW without control Bale shredder: 35 kW including control Dust filter capacity: 20,000 m³/h including control Operating hours entire line: approx. 1,500 h hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary airlock Fan for cooler extraction New ring die Various used spare parts 10 m infeed table for the bale shredder Bale shredder including control Hammer mill including control Centrifugal separator Discharge screw BigBag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 Ljdpfx Aiozdy Dujiehh all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Palletizer and Wrapper Concetti PS-AA/15S high-level push-type layer palletizer for bags – up to 1,000 bags/hour. BY 2011 Max. pallet height: 2,200 mm (incl. pallet) Max. pallet weight: 1,750 kg Technowrapp B150E pallet wrapper with rotating arm and integrated top sheet applicator – up to 42 pallets/hour. BY 2011 All machines are in working condition and sold as-is. The line can be sold complete or in parts. Additional auxiliary equipment available: steel structures, elevator, sieve, hoppers, etc. Lhsdpfx Aoxc E R Deiioh More information on request. Tags Concetti, PS-AA/15S, palletizer, bag palletizer, high level palletizer, Technowrapp, B150E, pallet wrapper, stretch wrapper, bagging line, packaging line, volumetric dosing, bagging machine, tubular film, free-flowing products, granules, bulk packaging, second-hand packaging line, used bagging machine.

Condition: new, Year of construction: 2026, STARWELD POBH is an advanced version of our high-performance mesh welding line, designed to produce high-quality wire mesh 3D fences, including Eurofence and “V”-shaped fence designs. This model is equipped with a bending unit that allows for precise shaping of wire mesh, making it an ideal choice for various fencing projects. Bending Unit: The integrated bending unit empowers STARWELD POBH to effortlessly shape wire mesh into Eurofence or “V”-shaped fence patterns with precision. This feature enables you to meet the demands of diverse fencing projects with ease. High-Quality Output: Expect nothing less than exceptional quality from STARWELD POBH. Whether you’re crafting aesthetically pleasing Eurofences or robust “V”-shaped fences, our model ensures each piece meets the highest industry standards. Tailored to Your Needs: Just like its predecessor, STARWELD POH, this model is customizable to your specific project and mesh type parameters. We can adapt the design to suit your unique requirements, ensuring optimal performance and results. STARWELD POBH is not only ideal for the construction industry but also finds its utility in crafting shelves, grids, cages, pallets, containers, and, of course, fencing. Its ability to create intricate 3D fence designs makes it a standout choice for projects that demand both functionality and aesthetics. Lhjdpfx Aijd Rlanjish Elevate your wire mesh production capabilities with STARWELD POBH, where innovation meets precision to redefine the art of fence manufacturing. Contact us today to discuss how STARWELD POBH can transform your fencing projects into works of excellence.

Condition: excellent (used), mileage: 530,230 km, power: 265 kW (360.30 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 6,850 mm, loading space width: 2,480 mm, Year of construction: 2017, Equipment: crane, MAN TGS 26.360 First commissioning: 05/04/2017 Mileage: 530,230 km Emission class: 6 Automatic transmission, 12 gears Loading crane COPMA 0.4 + JIB Year of manufacture: 2005 Ledpfx Ajzf E Axjiiehh 4x hydraulically extendable + 3x hydraulically extendable Load capacity: 4,100 kg at 4.54 m Load capacity: 2,000 kg at 8.4 m Load capacity: 1,270 kg at 12.4 m Load capacity: 610 kg at 15.3 m Load capacity: 300 kg at 16.5 m Remote control Elevated platform control Cargo area: Length: 6.85 m Width: 2.48 m Payload: 12,000 kg Gross vehicle weight: 26,000 kg Tire tread depth front axle: % Tire tread depth second axle: +/- 25–30 % Tire tread depth third axle: +/- 25–30 % Brake pads first axle: 76–82 % Brake pads second axle: 82–82 % Brake pads third axle: 41–24 % Automatic climate control On-board computer Central locking Cruise control Differential lock Electric windows and exterior mirrors Lane keeping assist Air horn Air suspension rear Lift axle rear / Steering axle rear Orthopedic driver's seat Seat heating .... Cevoman bv. Lenskensdijk 5 20 Herentals Belgium

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: - Onion (any type) & Garlic Peeler - Unpeeled product hopper - Transportation conveyor (for peeled product, waste, inspection table with platform) All equipment is fully made of stainless steel. I also have a large number of spare parts available at an additional cost. A new Tecnoceam Peeler 255 (machine only, without other equipment) costs nearly €200,000! Automatic Air Peeling Machine for Garlic and Onions – PAC 255 (995) This machine is suitable for peeling a wide variety of onions (spherical, elongated, or flat), shallots, and ginned garlic cloves, intended for the fresh produce market, freezing, or preserved products (in oil/pickles, sauces, etc.). ADVANTAGES: • Uniform and gentle peeling process • High flexibility, especially for handling a wide range of onion shapes and sizes • Durable abrasive parts with quick changeover of peeling elements • Wide selection of peeling nets available for different product calibers • Fully automated and customizable continuous operation; control panel allows adjustment of loading time (inserted quantity) and process time (peeling cycle duration) • Easy access to internal components for cleaning and maintenance • Convertible from onion peeler to garlic peeler and vice versa • Suitable for integration in multiple lines (e.g., 2/3 model 255(995) machines in series) Approximate output: Onions: 400–900 kg/h (depending on size, see brochure) Garlic: 200–300 kg/h Overall dimensions: 3,200 x 1,700 x H 2,300 mm (including automatic feed elevator) Product size range: Min. diameter: 25 mm; Max. diameter: 100 mm; Max. stem length: 30 mm Peeling cycle duration: 1–2 minutes Lodoy I Dlmepfx Aiijhh

Condition: new, mileage: 750 km, power: 324 kW (440.52 HP), first registration: 06/2025, fuel type: diesel, axle configuration: 6x4, wheelbase: 39,000 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, onboard computer, trailer coupling, - Leaf spring suspension - Differential lock - Speed limiter - Sun visor MAN TGS 33.440 BB 6x4 EURO 6e 3-sided tipper EuromixMTP Euromix tipping system Crane Hiab X-Hiduo 228 - 6 (also available as a 6x6 all-wheel drive) First registration date: 12/2025 700 km Vehicle equipment Diesel engine MAN D2676 LFAZ, 324 kW (440 hp) power output, 2,250 Nm torque, Euro 6e Transmission MAN TipMatic 12.28 OD - MAN TipMatic Efficiency driving program, up to 70,000 kg Front axle tires, optional 385/65R22.5 steering-S+G TL Rear axle tires, optional 315/80R22.5 drive-road TL Lhsdpfxeym Tg Nj Aiish Front axle, 9,200 kg, not driven, straight Rear axle HPD-1382, 13,000 kg, tandem axle with through-drive, straight Axle ratio, i=3.25 Suspension type leaf/leaf (BB) Wheelbase 3900 mm Daytime running lights, LED Multi-function steering wheel, height and inclination adjustable 2 roof beacon lights on the cab roof, 1 on the right and 1 on the left Trailer coupling on the rear cross member, RINGFEDER Type RF50 A Storage box, center area, rear Air deflector to prevent dust from swirling Cruise control (FGR - driving speed control) Air conditioning MAN Media System Advanced Navigation 7 inch Noise level 80 dB (92/97EEC) Elevated air intake with dry air filter / pre-separator Differential lock Fuel tank 300l left and 35l AdBlue Three-part steel bumper MAN BrakeMatic (electronic braking system) Disc brakes on rear and front axles Central locking Sun visor Driver's comfort seat, air-sprung AUX-in/ USB in the dashboard Tipper equipment: EuromixMTP three-way tipper EMK3-K loading crane Type: EuromixMTP EMK3-K Description of tipper body: Length: 5,100 mm Width: 2,410 mm Side boards: 800 mm Front panel: 1,118 mm Flush-mounted, folding lashing eyes Floor: 5mm HARDOX 450 Side boards: 4mm HARDOX 450, left: EuromixMTP hydraulically operated, right: manual swing-out side board or tipping system Rear panel: automatic swing-out 4mm Hardox 450 Front panel: 4mm HARDOX 450 Rear panel: 4mm HARDOX 450 Auxiliary frame: welded structure made of high-quality steel Hydraulics: - Penta tipping cylinder with end stop, - Control block (main valve) - pneumatic tipping control - pneumatic switching tipper / crane - valve on the auxiliary frame - pump and oil tank Options: Hydraulic connection for tipping trailer Broom and shovel with holder Foldable under-ride guard Tarpaulin DURABLE AND ROBUST FOR YOUR USE! Crane Hiab X Hiduo 228-6 6-section boom Radio remote control hydraulic lines for attachments 2.55m = 5500 kg 4.45m = 4150 kg 6.45m = 2850 kg 8.45m = 2120 kg 10.60m = 1680 kg 12.70m = 1380 kg 14.70m = 1100 kg 17.00m = 810 kg For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski Front axle: Steered Rear axle 1: Differential lock Rear axle 2: Differential lock Number of cylinders: 6 GVWR: 32,999 kg Crane: Hiab 228-6 Brand of...

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. Ljdpfx Aet Hwucsiijhh * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!