Used Kondia K 600 Cnc for sale (51,968)

Year of construction: 2024, condition: new, The JC 600 jaw crusher is ideal for crushing hard, brittle, hard-tough samples such as ceramics, clinker, coke, building materials, ferroalloys, glass, minerals, ores, precious metals, rocks, silicon, slag and much more. Dcodpoiamqbsfx Albol

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones Djdpfxey Au Eas Albocl - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Dsdpfx Aoznkpvjlbecl Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h Dsdpfx Aex Upd Uslbocl - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Condition: like new (used), Year of construction: 1970, turning height: 4,000 mm, workpiece weight (max.): 100,000 kg, turning diameter: 17,000 mm, faceplate diameter: 5,000 mm, Universal machine 5-axis (turning, milling) Froriep 40KE 500/600-400 Spheromill Djdpfxjym Ri Uj Albecl Year of construction: 1970 (modernized 1984 and 2006) Control: Siemens 840D Milling length: 8500 mm Working height max: 4000 mm Maximum turning diameter: 17,000 mm Table diameter: 5000 mm Ram setting: -15 degrees to +90 degrees Table speed max: 40 rpm (100 kW) Maximum working load: 100 tons Accessories Milling head (800 rpm / 60 kW) Universal milling head (630 rpm) Facing slide for diameter max. 1000 mm Grinding equipment 90 degree angle head (630 rpm) 90 degree angle head (450 rpm) - small

Condition: good (used), Year of construction: 2017, operating hours: 9,370 h, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 triple 460 Freelift / Sideshift / Fork Adjuster, 2017, VW Diesel, 9370 hours. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always on site. Van de Wert Trading B.V. Dodpszq D Nbjfx Albjcl Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Dcodpfx Alegmhxaobjl Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Dedpfx Aeyw Rnyslbjcl To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Max useful working width mm 3500

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels Dcsdpfovnq H Ejx Albel 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Dedpfozqun Usx Albjcl Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Dcsdpfx Aovupr Telbsl Axle drives hybrid servo drives

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, Dcodpfx Aeiz S Haslbol It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Table width: 100 mm Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Dsdpfx Aozl Ahrslbjcl Crowning: Yes Power: 11 kW Length: 5200 mm Width: 1730 mm Height: 3240 mm Weight: 10500 kg

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Dcjdpfxstpuqys Albol ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm ✔ Weight: 1250 kg Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), GT SERIES KNIFE MILLS MACHINES HOUSED IN SOUND-ABSORBING ENCLOSURES, COMPLETE WITH BIG-BAG STATION OPEN ROTOR WITH V-CUTTING SYSTEM Dcedpfeudyghjx Albol THE FOLLOWING MILL SIZES ARE CURRENTLY AVAILABLE IN STOCK GT300/600 ROTOR DIAMETER 300MM ROTOR LENGTH 600MM MAIN MOTOR 15KW ROTOR EQUIPPED WITH V-SHAPED KNIVES

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Dodeht Hkkopfx Albscl Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Dodpsikq Tyofx Albscl Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: used, Year of construction: 2012, operating hours: 1,861 h, functionality: fully functional, total length: 4,100 mm, total height: 1,950 mm, total width: 1,930 mm, pressure: 600 bar, empty load weight: 1,320 kg, fuel: diesel, overall weight: 1,800 kg, power: 36.5 kW (49.63 HP), temperature: 55 °C, SDAH industrial machine, high-pressure pump: + Woma + Ecotherm 600 + First registered: 21.11.2012 + 1,861 operating hours Dsdpfx Aozpycbslbocl + 4-cylinder Kubota diesel engine, 2400ccm; 48 hp + WOMA high-pressure pump, 600 bar + 2 burners (1 burner disconnected) + 55°C heating temperature + Ball head coupling + Single-axle chassis + Tool box at the front + Storage compartment at the rear + 200l water tank + Foot switch + 2 x cable reel + connection cable + HD hose + Woma gun + 410cm x 193cm x 195cm (l x w x h) + Unladen weight: 1,320 kg; permissible GVW: 1,800 kg + High-pressure cleaner, from first owner Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Year of construction: 2026, CKT 320 × 750 CNC Lathe is an advanced CNC turning machine designed for precision machining of metal components in medium and large production facilities. Equipped with the Siemens Sinumerik 808D CNC control system and a hydraulic machine configuration, it delivers high productivity, reliability, and excellent machining accuracy. Dedpfx Aoi Apg Ujlbecl Key Features of the CKT 320 × 750 CNC Lathe The CKT 320 × 750 CNC metal lathe combines precision, flexibility, and durability, meeting the requirements of professional workshops and industrial production environments. As an advanced industrial CNC lathe, it enables complex machining operations such as turning, threading, grooving, and drilling while maintaining excellent component quality. Main Advantages High machining precision – maximum swing over bed of 320 mm, swing over cross slide of 90 mm (optional 135 mm), 51 mm spindle bore, and maximum bar diameter through spindle of 44 mm ensure accurate machining across a wide range of applications. Flexible spindle system – spindle speed range of 100–2500 RPM with an MT5 spindle nose allows machining of various materials, from steel to lightweight alloys. Advanced CNC control – Siemens Sinumerik 808D Advanced with Polish-language interface and Siemens servo drives improves programming efficiency and production performance. Rigid machine construction – net weight of 1040 kg (gross weight 1300 kg) and dimensions of 2370 × 1420 × 2000 mm provide excellent stability when machining workpieces up to 750 mm in length. Efficient tooling system – 4-position turret (optional 6 or 8 positions) with 16 × 16 mm tooling reduces tool change times and improves cycle efficiency. Hydraulic components – hydraulic 3-jaw chuck and hydraulic tailstock ensure fast, precise, and reliable workpiece handling. Long service life and reliability – automatic lubrication system for gears and guideways minimizes wear and extends machine lifetime. Optimized cooling system – protects tools and workpieces, ensuring stable machining conditions and high surface quality. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries. Energy-efficient operation – 5.1 kW (S1) / 3.7 kW motor combines high performance with optimized energy consumption. Customizable configuration – optional features such as Fanuc Oi-TF control, tool probe, and CAD/CAM software integration allow adaptation to specific production requirements. Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Hydraulic 3-jaw chuck 4-position turret (optional 6 or 8 positions) Complete set of soft jaws Hydraulic tailstock with MT3 center Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting Technical and operating documentation CE Declaration of Conformity Technical Specifications Specification Value Swing over bed 320 mm Swing over cross slide 90 mm (optional 135 mm) Distance between centers 750 mm Spindle speed range 100–2500 RPM Spindle bore 51 mm Spindle taper MT5 Number of tools 6 Tool size 16 × 16 mm Maximum bar diameter through spindle 44 mm Tailstock taper MT3 Maximum tailstock travel 100 mm Main motor power 5.1 kW (S1) / 3.7 kW Machine dimensions (L × W × H) 2370 × 1420 × 2000 mm Net / gross weight 1040 / 1300 kg

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 51 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English Djdpfx Alsizw E Asbecl SIEMENS servomotors 1 live tool 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CKT 400 × 1000 CNC Lathe with Driven Tooling is an advanced CNC turning machine designed for precision machining of metal components in medium and large-scale production facilities. Equipped with the Siemens Sinumerik 808D CNC control system, it provides reliability, high accuracy, and ease of operation, meeting the requirements of modern industrial manufacturing processes. Key Features of the CKT 400 × 1000 CNC Lathe with Driven Tooling The CKT 400 × 1000 CNC metal lathe is a professional industrial solution offering: High machining precision – maximum swing over bed of 400 mm and swing over cross slide of 210 mm, with minimum setting resolution of 0.001 mm on both X and Z axes. Flexible spindle system – spindle speed range of 0–2000 RPM, spindle bore of 52 mm (optional 72 mm), and MT6 spindle taper provide versatility for various machining applications. Intuitive CNC control – Siemens Sinumerik 808D Advanced system with Polish-language interface and Siemens servo drives ensures easy operation and high process reliability. Rigid machine construction – net weight of 2000 kg provides excellent stability during machining of workpieces up to 1000 mm in length. Efficient tooling system – 4-position tool holder with driven tooling (optional 6 or 8 positions), supporting tools up to 20 × 20 mm (optional 25 × 25 mm), enables flexible machining operations. Fast setup and adjustment – convenient tool positioning, work zero setting, and corrections can be performed without writing complete CNC programs. Enhanced operator safety – controlled rapid movements and spindle speed limitation allow precise and safe machine operation. Dcodpfov A S N Dox Albel Extended component durability – automatic lubrication system for gears and guideways reduces wear and increases machine service life. Optimized cooling system – ensures thermal stability and protects cutting tools and workpieces during intensive machining. Energy-efficient operation – the 5.5 kW main motor combined with 6 Nm X and Z axis feed motors provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring advanced G-code programming knowledge. Customizable configuration – available options include Fanuc Oi-TF control, hydraulic chuck, bar feeder, and CAD/CAM software integration. European safety standards – CE Declaration of Conformity Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Manual lathe chuck 4-position tool holder with driven tooling Complete set of soft jaws Hydraulic tailstock with MT5 quill Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual CE Declaration of Conformity Technical Specifications Maximum swing over bed 400 mm Maximum swing over cross slide 210 mm Distance between centers 1000 mm Spindle speed range 0–2000 RPM Spindle bore 52 mm (optional 72 mm) Spindle taper MT6 Tool positions 6 + 1 driven tool Maximum tool size 25 × 25 mm Minimum setting resolution (X / Z axes) 0.001 mm / 0.001 mm X-axis rapid traverse 8 m/min Z-axis rapid traverse 10 m/min Tailstock taper MT5 Maximum tailstock quill travel 120 mm Main motor power 5.5 kW X-axis feed motor 6 Nm Z-axis feed motor 6 Nm Packaging dimensions (L × W × H) 2640 × 1500 × 1770 mm Net weight 2000 kg

Condition: new, Year of construction: 2026, CKT 560 × 1500 CNC Metal Lathe is a professional industrial solution combining advanced CNC technology with a robust machine structure, designed for production facilities requiring the highest standards of machining quality. This industrial CNC lathe enables a wide range of complex operations, including external and internal turning, spherical turning, threading, drilling, grooving, and contour machining. Key Features Exceptional machining accuracy – maximum swing over bed of 560 mm, swing over cross slide of 340 mm, and a 430 mm wide bed ensure high rigidity and precision during demanding operations. Flexible spindle system – spindle speed range of 100–800 RPM and a 75 mm spindle bore (optional 90 mm) with an A2-11 spindle nose allow machining of a wide variety of materials, from steel to lightweight alloys. Intuitive CNC control – Siemens Sinumerik 808D control system with Polish-language interface and Siemens servo drives provides a dedicated operating mode for conventional lathe users, reducing the learning curve for CNC operation. Rigid construction – with a net weight of 3600 kg and dimensions of 3770 × 1500 × 1900 mm, the machine provides excellent stability when machining workpieces up to 1500 mm in length. Efficient tooling system – an 8-position turret (optional 6-position) with 25 × 25 mm tooling enables fast tool changes and reduces production cycle times. Fast setup and adjustment – allows convenient tool setting, work zero positioning, and corrections without the need to write complete CNC programs, making it ideal for single-piece and small-batch production. Enhanced operator safety – controlled rapid movements and spindle speed limitations enable precise and safe machine operation. Extended component life – automatic lubrication of gears and guideways reduces wear and ensures long-term reliability. Optimized cooling system – maintains thermal stability and protects tools and workpieces during intensive machining. Wide range of applications – suitable for precision turning in mechanical engineering, automotive, and tooling industries, for both serial and small-batch production. Energy-efficient performance – the 11 kW main motor provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring detailed G-code knowledge. Advanced automation options – available with hydraulic chuck, hydraulic tailstock, bar feeder, and chip conveyor systems. Machine customization options – available upgrades include Fanuc Oi-TF, Siemens Sinumerik 828D, tool probes, and CAD/CAM software integration. Standard Equipment Siemens Sinumerik 808D CNC control Siemens servo drives Manual 3-jaw chuck 8-position turret Complete set of soft jaws Manual tailstock Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual EC Declaration of Conformity Technical Specifications Djdji Apf Tspfx Albscl Specification Value Swing over bed 560 mm Swing over cross slide 340 mm Maximum workpiece length 1500 mm Spindle speed range 100–800 RPM Spindle bore 75 mm (optional 90 mm) Bed width 430 mm Spindle nose A2-11 Number of tools 8 Tool size 25 × 25 mm Tailstock taper MT5 Maximum tailstock travel 150 mm Main motor power 11 kW Machine dimensions (L × W × H) 3770 × 1500 × 1900 mm Net weight 3600 kg

Condition: new, Year of construction: 2026, CNC Lathe for Alloy Wheel Refurbishment This advanced CNC lathe is an indispensable solution for the refurbishment and precision machining of alloy wheels. It enables professional surface finishing, removal of damage, and restoration of wheels to a like-new appearance. The machine is equipped with an advanced CNC control system that allows fast programming of machining cycles while ensuring outstanding repeatability and excellent surface quality. Its compact footprint and ergonomic design make it easy to integrate into any workshop environment. It is the ideal choice for professionals seeking a productive, reliable, and highly accurate solution for alloy wheel refurbishment. Technical Specifications Parameter Specification Maximum Swing Over Bed 710 mm Maximum Wheel Diameter 28 in Spindle Nose A2-6 Dsdpfx Aozpwzhjlbocl Spindle Bore 60 mm Chuck Manual Maximum Spindle Speed 1,500 rpm Motor Power (S1) 4.5 kW Equipment (Depending on Configuration) G-code CNC control Special wheel chuck for wheels up to 28 inches Wheel profile optimization software package Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Available CNC Control Systems Siemens SINUMERIK 808D Siemens SINUMERIK 828D Fanuc Oi-TF Professional CNC Control Systems The CNC Alloy Wheel Refurbishment Lathe is available with professional control systems from leading manufacturers including Siemens, Fanuc, and GSK. These systems provide exceptional precision, reliability, and flexibility, making them suitable for both simple machining operations and complex production processes. Siemens SINUMERIK 808D An economical CNC control designed for entry-level CNC lathes and machining centers, ideal for small and medium-sized workshops. Key Features Intuitive graphical interface with Teach-In programming for fast operator training Reliable industrial design resistant to dust and moisture Easy integration with Siemens servo drive systems Low power consumption and minimal maintenance requirements Cost-effective solution for first-time CNC users Siemens SINUMERIK 808 Advanced A modern CNC controller offering enhanced functionality while maintaining simple operation. Benefits User-friendly interface suitable for smaller workshops Rugged industrial construction Cost-effective solution for standard turning and milling applications Improved performance and programming flexibility Siemens SINUMERIK 828D A high-performance CNC system designed for demanding machining applications. Key Features Powerful processor for dynamic machining operations Advanced turning cycles and optimized tool paths CAD/CAM integration for streamlined production Expandable architecture supporting additional machine functions Excellent performance for both prototype and production environments Fanuc Oi-TF One of the world's most trusted CNC control systems, recognized for its reliability and precision. Key Features Outstanding stability during continuous production Advanced turning cycles for threading, grooving, and precision machining Fast and intuitive programming interface Proven reliability with low maintenance requirements Ideal for high-volume industrial applications

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Dsdpfxjtqf Sqs Albecl Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Dodpfx Aljtqf Rzebjcl Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat