Used Kolbus Pe 70 for sale (19,432)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Dsdpfxoy Hkd Ho Ailecn Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, mileage: 399,000 km, power: 213 kW (289.60 HP), first registration: 01/2009, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, loading space length: 4,700 mm, loading space width: 2,350 mm, loading space height: 700 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, Mercedes AXOR 1829 / 4x2 KIPPER 4,70 m Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 399 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH Tipper: 470 x 235 x 70 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 19 000 kg WHEELBASE: 390 cm TIRE SIZE: 13R22,5 Dcodpoy Hn Amsfx Ailsn SUSPENSION: SPRING TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, mileage: 386,000 km, power: 272 kW (369.82 HP), first registration: 05/2016, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: red, gearing type: mechanical, loading space length: 6,400 mm, loading space width: 2,400 mm, loading space height: 900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, Volvo FM 370 / 8x4 Tipper 6,40 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2016 ? MILAGE: 386 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION TIPPER: 640 x 240 x 90 cm (L x W x H) CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg TIRE SIZE: 315/80R22,5 WHEELBASE: 200/310/135 cm SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO Dcodey Eu N Dopfx Ailen SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 27451

Condition: new, 40 mm 8,5 U/min 120 mm Dcjdpfx Ajy H N I Doilon roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Year of construction: 2011, condition: used, Card gluer Kolbus KK 841 Year: 2011 Hotmelt glue unit: Nordson Problue 4 Djdpfjyyb Sbsx Ailjcn Compatable with Kolbus gatherer: ZU 841.B

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453038, power: 0.87 kW (1.18 HP), load capacity: 250 kg, lifting height: 13,700 mm, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 3,220 kg, transport length: 2,480 mm, transport width: 1,190 mm, transport height: 2,220 mm, fuel type: electric, tire size: 381 x 127 mm, color: red, Equipment: UVV, Technical Data Dcsdjyqyznepfx Ailsn Year of manufacture: 2022 Engine: Electric Working height: 15.70 m Working height: 13.70 m Platform extension: 0.90 m Platform dimensions (LxW): 2.27 x 1.12 m Overall dimensions (LxWxH): 2.84 x 1.19 x 2.22 m Max. load capacity: 250 kg Load capacity when extended: 113 kg Max. gradeability: 25% Driving speed: 0.8 - 5.0 km/h Weight: 3,220 kg Fully functional, general signs of use, UVV

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2452618, power: 0.87 kW (1.18 HP), load capacity: 250 kg, lifting height: 13,700 mm, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 3,220 kg, transport length: 2,480 mm, transport width: 1,190 mm, transport height: 2,220 mm, fuel type: electric, tire size: 381 x 127 mm, color: red, Technical Data Year of manufacture: 2021 Engine: electric Working height: 15.70 m Platform height: 13.70 m Platform extension: 0.90 m Platform dimensions (LxW): 2.27 x 1.12 m Overall dimensions (LxWxH): 2.84 x 1.19 x 2.22 m Max. load capacity: 250 kg Load capacity when extended: 113 kg Max. gradeability: 25% Driving speed: 0.8 – 5.0 km/h Weight: 3,220 kg Fully functional, general signs of use Dcodpeyqzyfjfx Ailjn

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 7.5kW Left 11kW Top 15kW outboard bearing Right 11kW Left 11kW Top 15kW outboard bearing Bottom 15 kW outboard bearing Bottom 30 kW outboard bearing Dcodpfx Aijzcu Elsljn Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. 105 pcs of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Total 137.5kW Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2018, - for unattended operation - for temperatures from 100 °C to 300 °C - external dimensions: 1500 x 2773 x 2096 mm (W x H x L) - clear internal dimensions per chamber: 800 x 800 x 1100 mm (W x H x L), height with beams = 700 mm - maximum batch dimensions: 700 x 600 x 1000 mm (W x H x L); maximum weight: 500 kg Connection values per chamber: circulation = 3.0 kW (1 unit); electric heating = 30 kW (1 control group) Dodpfxjzbnnwj Ailocn Temperature accuracy +/- 5 K at 150 °C, 250 °C, 300 °C adjustable up to +/- 1.5 K temperature accuracy depending on the batch geometry 1 Protherm 500 program controller

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, number of digital displays: 1, Equipment: cone bending device, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Foot control Dcsdpjyp E Siefx Ailen – Emergency stop – Documentation – 400V

Condition: used, GE Druck PACE5000 High-Precision Pressure Controller Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device Type: Modular High-Precision Pressure Controller / Pneumatic Pressure Controller Pneumatic Control Module: CM0-B-16G For sale is a used GE Druck PACE5000 High-Precision Pressure Controller. This modular pressure control system was developed for demanding calibration, testing, and automation tasks and is suitable for calibration laboratories, research, development, quality assurance, and industrial test benches. The device impresses with its high control accuracy, fast pressure regulation, and extensive communication interfaces. Technical Data Control Range: -1 to 70 bar(g) Maximum Allowable Working Pressure (MWP): 94 bar Accuracy: up to 0.001% of full scale (model-dependent) Long-Term Stability: up to 0.001% FS Dimensions (W × H × D): approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Dcedpsziyqrjfx Ailjn Pressure Control Modular pressure control system High pressure control speed Automatic pressure regulation Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections Supply Output Vent Reference G1/8" connection Power Supply 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Equipment Pneumatic Control Module CM0-B-16G Color touch display Ethernet interface USB Host / USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pressure connections Power cable Accessories as shown in the pictures Application Areas Calibration laboratory Test benches Quality assurance Automotive industry Aerospace Mechanical engineering Metrology Research and development Automation technology Pressure sensor calibration Shipping Data Dimensions: approx. 440 × 88 × 320 mm Weight: approx. 10.1 kg Condition Used The device was last used in an industrial setting. Optical condition as shown in the pictures. Normal wear and tear due to age. Scope of Supply GE Druck PACE5000 Power cable Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Dedpfx Ajziyw Ejilocn Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber Water-Cooled The Weiss climate chamber WK11-600/70/5 with approximately 600 liters usable volume is suitable for temperature and humidity testing, as well as for the conditioning of samples and materials in a range from −70 °C to +180 °C. Simcon/32 - Net controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Feedthroughs: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Temperature Test Data: Temperature range: -70 °C to +180°C Temporal temperature deviations at the center of usable space: ±0.1 to ±0.5 K Spatial temperature deviations: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Heat compensation: At +20 °C: 5000 W At -20 °C: 5000 W Climate Test Data: Temperature range: +10 to +95 °C Humidity range: 10 to 98% r. H. Temporal temperature deviations at the center of usable space: ±0.1 to ±0.3 K Spatial temperature deviations: ±0.5 to ±1 K Temperature gradient: 1 to 2 Humidity fluctuation (temporal, center of usable space): ±1 to ±3% r. H. Heat compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Main fuse (to be provided by customer): 32 A slow-blow Permissible test material weight: Total load of racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Weight: 675 kg Refrigerants: R452A / R23 Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information: The following points are completed on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Djdpfx Aiezimg Holjcn 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical specifications subject to change and errors excepted!) We are happy to answer any further questions over the phone.

Year of construction: 2004, condition: used, Conveyor tower Dcjdpszi S Amjfx Ailen Ambaflex SV-400-1800-HS - Kolbus XAF 660 Year: 2004 Description: - Length of conveyor: +/- 28 mtr

Year of construction: 2005, condition: used, Intermediate Delivery Dcedpfx Asyzduboilon Kolbus TS.Z year 2005 Configuration: incl. operating panel Technical specifications: length: 2.000 mm

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: Dcjdpfx Ajy Au I Ueiljn * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Year of construction: 2004, condition: used, Conveyor Kolbus FS.T Year: 2004 Description: - Transport system, length (approx): 300 - 380 cm. Dcjdpfx Aisyt Dqxsljn - Conveyor (walk through)

Condition: used, Conveyor Kolbus Dedpfx Aisyt Dr Aolecn Description: - Transport system, length (approx): 450 - 530 cm. - Conveyor (walk through)

Year of construction: 2004, condition: used, Conveyor Kolbus FS.L Year: 2004 Dcjdeyt Dtaspfx Ailen Description: - Transport system, length (approx): 550 cm.

Year of construction: 2004, condition: used, Conveyor Kolbus FS.L Year: 2004 Description: Dcedpfsyt Duqsx Ailen - Transport system, length (approx): 402 cm.

Year of construction: 2004, condition: used, Conveyor Kolbus XTN 640 Year: 2004 Description: Dsdpfjyt Dvhsx Ailscn - Conveyor (90° to the right)

Year of construction: 2004, condition: used, Conveyor Kolbus FS.L Year: 2004 Dcedpoyt Dwrefx Ailjn Description: - Transport system, length (approx): 100 cm.

Year of construction: 2004, condition: used, Conveyor Kolbus FS.L Year: 2004 Dsdpsyt Dy Hefx Ailjcn Description: - Transport system, length (approx): 100 cm.

Year of construction: 2004, condition: used, Conveyor Dcodpfx Aoyt Dy Tjilon Kolbus FS.L Year: 2004 Description: - Transport system, length (approx): 203 cm.

Condition: used, Year of construction: 1990, Heavy-duty rollforming line Dcodpfxsymzzuo Ailon 10 stations Width: 260 mm