Used Kent Kent Kos-510V.ma2 for sale (238)

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Ibsdpfx Ahewv T R Ueyjc Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site Ibjdpewwt Aajfx Ahyjc

Condition: new, empty load weight: 144 kg, maximum load weight: 606 kg, overall weight: 750 kg, axle configuration: 1 axle, Year of construction: 2024, Manufacturer UNITRAILER Product code UT004240 Model Garden Trailer 264 KIPP GVW min. 300 kg GVW max. 750 kg Length of loading area 2641 mm Width of loading area 1256 mm Tire type 155/70 R13 Spare wheel with holder optional Where are the wheels located outside the load compartment? Type of suspension unbraked axle up to 750 kg Number of axles 1 Braked no Drop sides steel Dropside height 300 mm Type of loading area made of screen-printed floor panel Tipping mechanism yes Use Removals, internal transportation of goods Tare weight 144 kg Total capacity 606 kg Reversing light No Long trailer GARDEN TRAILER 264 KIPP with high tarpaulin, high bows and support wheel Below you will find more information about the largest single-axle trailer (currently available from UNITRAILER) with a transport area of 264x125 cm, which can be used to transport large loads with ease. The Garden Trailer 264 KIPP makes all transportation tasks easier. The trailer also has a tipping mechanism that allows virtually all loads to be loaded and unloaded at lightning speed. Required documents and immediate delivery If you decide to buy the Garden Trailer 264 KIPP with high tarpaulin and high frame, you don't have to worry about any official matters. We will do everything for you to save your time and guide you smoothly through the execution of the order. We will prepare the necessary documents for you that you need for immediate registration, i.e. invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. The purchased car trailer will be dispatched within 7 working days with the complete set of documents. Buy online now! The car trailer is both tiltable and very robust. What should you look out for in the Garden Trailer 264 KIPP model? - Very large transport area, which facilitates the transportation of large goods - Corrosion-resistant structure - Above-average strength with additional support beams under the loading area - clearance lights, which are very important when reversing - corrosion-resistant and very robust mudguards - rear lights that are protected against damage - the option of placing the trailer on the tailgate [this ensures that the trailer takes up little space] - the wheels on this model are mounted on the side (and not under the loading area), which is a very convenient solution when driving without a load Technical dimensions of the Garden Trailer 264 KIPP car trailer DRIVE: - Steering axle from Knott or AL-KO - Wheel size: 155/70 R13 - Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time. CONSTRUCTION: - Support frame made of hot-dip galvanized sheet steel - Curved profiles with bolts were used - Loading area: anti-slip screen-printed floor panel, 9 mm thick - Loading area dimensions: 2640 mm (length) x 1250 mm (width) Ibsdper Nbp Hsfx Ahyec - Overall dimensions: 3541 mm (length) x 1690 mm (width) DROP SIDES: - all drop sides are made of galvanized steel - Rear dropside can be opened and completely removed - 110 cm (standard drop sides - 30 cm high, high bows - 80 cm high) - corrosion resistant Shipping from: 249€

Condition: new, empty load weight: 190 kg, maximum load weight: 560 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 300 mm, tire size: 13, wheelbase: 165 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, AND THE CZECH REPUBLIC. Product code: UT004049 Below, you will find more information about the largest low-loader trailer (currently available from UNITRAILER) with a loading area of 264x125 cm, which makes it easy to transport large loads. The Garden Trailer 264/2 TIPPING simplifies all transport tasks. The trailer also features a tilting mechanism, which allows virtually any load to be loaded and unloaded quickly. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will tow the trailer. You can find the information on the permissible total weight on the last page under the entry in the vehicle registration document. Technical dimensions of the car trailer Garden Trailer 264/2 TIPPING CHASSIS: two steerable axles from Knott or AL-KO Tire size: 155/70 R13 Ibodpfx Ahsir H Sioyec Tiltable V-drawbar that can be folded under the trailer's floor plate at any time. BODY: Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip, water-resistant screen-printed floor panel, 9 mm thick Loading area dimensions: 2640 mm (length) x 1250 mm (width) Overall dimensions: 3541 mm (length) x 1690 mm (width) SIDE PANELS: all side panels are made of galvanized steel rear side panel can be folded down and completely removed 30 cm high corrosion-resistant Shipping costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, loading space volume: 0.8 m³, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004189 The UNITRAILER Garden Trailer 230 TIPPING transport trailer is the newest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which allows for quick loading and unloading in just a few minutes. Thanks to the tilting drawbar, it can be positioned vertically against the rear wall. We will take care of all the formalities associated with the purchase for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be towing the trailer. You can find the information on the permissible total weight on the last page, under the details in the vehicle registration document. Technical data of the Garden Trailer 230 TIPPING car trailer: Iedpeir H R Ejfx Ahyjbc CHASSIS - Steering axle from Knott or AL-KO – special orders available upon request from Unitrailer. Wheel size: 155/70 R13. Tilting V-drawbar, which can be folded under the base of the trailer at any time. BODY - Load-bearing frame made of hot-dip galvanized sheet steel. Curved profiles are used and fastened with screws. Loading area: non-slip and water-resistant screen-printed floor panel, 9 mm thick. SIDE PANELS - all side panels are made of galvanized steel. Rear side panel can be folded down. Shipping costs will be charged separately.

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, suspension: other, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004184 The UNITRAILER Garden Trailer 201 TILT car trailer, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. The ordered goods, along with the accompanying documentation, will be delivered to the address you specify in Germany/Austria within 3 to 5 business days. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be towing the trailer. Technical specifications of the Garden Trailer 201 TILT car trailer: Ibedjir H Suopfx Ahyec CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-drawbar, which can be folded under the trailer floor at any time BODY - Supporting frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel We deliver car trailers directly to your home. Delivery costs will be charged separately.

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Ibsdjyigigepfx Ahysc Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,265 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004183 The Garden Trailer 201 TIPPING car trailer from UNITRAILER, with a permissible total weight of up to 750 kg, features a folding rear gate, allowing for quick loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear gate at any desired location. All formalities related to the purchase will be taken care of for you. Iedpfxeir H Rpe Ahysbc When ordering a car trailer, please specify the permissible total weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 201 TIPPING car trailer CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer's base plate at any time BODY - Supporting frame made of hot-dip galvanized steel sheet Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed base plate, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel Shipping costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, loading space length: 220 mm, loading space width: 1,500 mm, loading space height: 784 mm, tire size: 155/70 r13, Year of construction: 2024, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. Product code: UT003741 Max. permissible total weight: 750 kg Unladen weight: 146 kg Size: 2200x1552 mm Motorcycle trailer for transporting 3 motorcycles. Our UNITRAILER MOTO 3 trailer is a very practical model, ideal for transporting three motorcycles. Specifically for motorcycle enthusiasts, we have developed a trailer that allows you to easily and quickly load and transport up to three motorcycles. Thanks to the special packaging method, we can ship the UNITRAILER MOTO 3 directly to your home via courier. Technical specifications: CHASSIS * Unbraked axle from AL-KO or Knott * Rubber-suspended suspension system * Wheel dimensions: 155/70 R13 * V-shaped drawbar BODY * Supporting frame: curved shape * Galvanized, screwed structure * Loading area: 3 rails with a total length of 1.5 meters OPTIONAL ACCESSORIES AVAILABLE FOR PURCHASE: * Support wheel with clamping bracket * Support tubes Dimensions of the MOTO 3 trailer: Ibodpfx Ahsir H N Seysc Dimensions of the entire trailer: Length: 3160 mm Width: 1910 mm Height: 790 mm Dimensions of the loading area: Length: 2200 mm Width: 1552 mm Shipping costs will be charged separately. Shipping from: €99

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Ibodpfeyybkdex Ahyoc Technical data - Capacity: approx. 12,000 bottles/hour - Formats: up to 3 L PET bottles - Application: PET bottle production - Configuration: Rotary stretch blow moulding machine, 6 cavities - Neck finish: PCO 1881 Scope of Delivery - Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds - Preform feeding system  - Chiller unit  - Air conveyor system  - Control system | Integrated HMI

Condition: used, Year of construction: 2005, Overview This KOSME EXTRAFIX 12T is a rotary combination labeller for glass wine bottles, built in Italy in 2005. Five labelling stations - three self-adhesive and two cold glue - work around a 12-plate carousel, so front, back and neck labels in both technologies can be applied in one pass. The machine is rated at 12,000 bottles per hour and has run on 750 ml, 375 ml and 1,000 ml bottles in a winery. It is still installed and under power, and can be visited by appointment. Technical data - Manufacturer: KOSME - Model: EXTRAFIX 12T - Year of manufacture: 2005 - Machine type: rotary combination labeller (self-adhesive + cold glue) - Capacity: up to 12,000 bottles per hour - Container: glass wine bottles, 750 ml, 375 ml and 1,000 ml - Bottle plates: 12 - Labelling stations: 5 (3 self-adhesive, 2 cold glue) - Power supply: 400 V, 3 phases + PE, 50 Hz - Installed power: 7 kW - Weight: approx. 4,200 kg - CE marked Equipment - 3 self-adhesive labelling stations, each with its own control display, label reel unwinder and backing-paper rewinder - 2 cold glue stations with label magazine and glue pallets - Rotary carousel with 12 bottle plates and centring bells Ibodpfx Aoz Nc Haohysc - Infeed screw, infeed and outfeed star wheels, bottle conveyor with guide rails - Control cabinet with operator panel - Stainless steel frame with transparent safety guarding Condition Used machine, still installed and connected. Can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time BODY - Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles were used with screws Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Ibjdpfxoir H R Tj Ahysc Shipping costs will be charged separately.

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) Iedpswwt E Uofx Ahysbc - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Iedpfx Aez Slplohyjbc Shipping or personal collection – to be arranged.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, warranty duration: 6 months, input voltage: 24 V, total width: 510 mm, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, year of last overhaul: 2026, empty load weight: 185 kg, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) Ibjdpfx Aeyanpfohyoc In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Iodpovtgaxefx Ahysbc

Condition: used, Year of construction: 2013, Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data - Year of manufacture: mainly 2013 - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Application: filling and packaging of non-returnable glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch Iedpfx Aezv Tu Dehyobc - Rinser: 50 stations, single-channel, 113 mm pitch - Filler block electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Filler block compressed air: 6 bar, approx. 450 Nl/min; water: 4 bar, approx. 3.5 m³/h - Filler block weight: approx. 10,500 kg - Integrated foam cleaning; touchscreen HMI on articulated suspension arm Scope of Delivery - Depalletizer | Krones | PRESSANT UNIVERSAL 1A | sweep-off depalletizer for new glass, servo-driven four-sided centering carriage, pallet lifting unit, approx. 5,000 mm discharge table, approx. 48,000 containers/h | 2020 - Rinser-filler-capper block | KOSME | BARIFILL RFC 50-60-10 VKP | stainless steel frame, transparent protective guarding with safety interlocks, process piping, layout drawing available | 2013 - Capper | Zalkin | CA9 360 NG | 10 capping positions, approx. 22,000 bottles/h; capping heads included | 2013 - Cap control | Krones | CHECKMAT - Labelling machine | KHS | INNOKET KL2040/120-30 LM | cold glue, up to 26,000 bottles/h, camera system for label orientation, Siemens S7 control, new HMI touch panel 2019, formats incl. 0.33 L Longneck, Steinie and swing-top and 0.5 L NRW bottles | 2004 - Wrap-around packer | Krones | WRAPAPAC | 45 cartons/min, carton format e.g. 15 x 750 ml glass bottles, Nordson PROBLUE LIBERTY 14 hot-melt unit with automatic fill system | 2003 - Palletizer | GEA Procomac | OPERA | low-level infeed, automatic changeover of pallet patterns and pallet sizes, complete pallet conveying system, pallet magazine, mother pallet handling | 2009 - Stretch wrapper | Robopac - Pallet labelling system | Logopack - Conveyors | KOSME | bottle transport between the machines, line divider and discharge | 2013 Condition Used. The core of the line is installed in an industrial production environment and still under power; the rinser-filler-capper block underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. The labelling machine was in production until January 2025, was overhauled in 2019 and is currently in storage. The line is composed of components from several production sites. Availability From mid-December 2026. Location: Germany.

Condition: new, The new 100F briquetting press from Holzprofi impresses with its mature, simple and solid construction. The press is designed for trade and industry. Made in EU ! Technical data: Motor output power 100% ED 11 kW Briquette diameter 70 mm Power consumption approx. 8200 W/h Capacity 90 - 120 kg/h Chip bunker 0.75 m³ Weight 810 kg weight briquettes approx. 900 - 1100 Kg/m³ Sound pressure level 68 dB Dimensions: 2220 x 1200 x 1510 mm standard equipment: Isdpfx Asvrvfnjhyebc With built-on oil cooler Vibration unit to prevent bridging of sawdust Automatic change of direction of rotation of the shaft Automatic switch-off Timer to start machine Special equipment on request: Carousel with 5 containers Filtering unit Modification of silo to fit filter systems of all manufacturers (eg AL-KO, Felder, Scheuch Lingo, Airmex, Nestro, Schuko, Höcker)

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling Ibsdpfx Ahezi I T Ieyoc - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Isdpfx Ahjbuvbrsysbc Weight: 758 kg Location: available from warehouse 54634 Bitburg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. Isdpfjfyadbjx Ahyjbc For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Ijdpfxezunu Ne Ahysbc Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. - Kosme Flexa Sensicol rotary labelling machine. - Kosme and Atlanta S.p.A. packaging equipment.

Condition: excellent (used), Year of construction: 2011, Closure cosmetics Iodpfxsxrubde Ahysbc

Condition: like new (used), functionality: fully functional, planing width: 630 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,500 rpm, total length of planing tables: 1,000 mm, total width: 650 mm, overall weight: 790 kg, Equipment: CE marking, The CASADEI R63 H3 is a professional thickness planer designed for the precise machining of solid wood components. Its robust and heavy-duty construction ensures stable operation, even under intensive use in woodworking and production facilities. The machine is equipped with a planing shaft with a working width of 630 mm and smooth feed speed adjustment in the range of 5–25 m/min. Technical specifications: - Manufacturer: CASADEI - Model: R63 H3 - Year of manufacture: 1999 - Maximum planing width: 630 mm - Maximum planing height: 300 mm - Minimum planing height: 4 mm - Maximum material removal: 8 mm - Minimum workpiece length: 250 mm - Work table length: 1000 mm - Planing shaft diameter: 120 mm - Number of knives: 4 - Knife dimensions: 630 × 35 × 3 mm - Shaft speed: approximately 4500 rpm - Adjustable feed speed: 5–25 m/min - Feed roller diameter: 85 mm - Power according to nameplate: 10 kW - Power supply: three-phase - Current draw: 18 A - Weight according to nameplate: 790 kg Key advantages: - Large working width – 630 mm - Four-knife planing shaft - Smoothly adjustable feed - Maximum workpiece height up to 300 mm - Massive and stable construction - Reputable Italian manufacturer - Machine designed for professional use This machine is ideal for use in a woodworking shop, sawmill, or company involved in the production of furniture and wood components. Condition: used, with normal signs of wear commensurate with its age. Inspection possible on-site. On-site testing of the machine is possible. Ibjdpfxjzxxgqo Ahyec Financing options are available through leasing or installment plans. The machine has been technically inspected and is ready for further use. It is possible to start and test the machine on-site, allowing you to assess its condition and performance parameters before purchase. For customer convenience, we offer financing options in the form of leasing or installments. We assist with the formalities and help you choose the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,006 mm, loading space width: 1,063 mm, tire size: 155/70 r13, Year of construction: 2024, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004179 Unbraked Garden Trailer 200 KIPP tipper with additional drop sides, support wheel, high tarpaulin and high bows as well as a tiltable drawbar [GVW up to 750 kg]. Loading area dimensions: 200 cm x 106 cm. We prepare all the necessary documents required for immediate registration, invoice, EC certificate of conformity, vehicle registration document, warranty book (2-year warranty) and our certificate. Technical data of the Garden Trailer 200 KIPP car trailer Ibodpfsr H E Tdex Ahysc WHEEL - Steering axle from the manufacturers Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE WALLS - all side walls are made of galvanized steel Delivery costs are charged additionally.