Used Kärger Moving Steady for sale (2,938)

Condition: like new (used), Year of construction: 2019, clamping force: 500 kN, Equipment: documentation/manual, _ENGEL – Injection Moulding Machine Technical Data_ Serial number: 232665 Model: E‑VICTORY _Plasticising Unit 1_ • Screw diameter: 18 mm • Listed diameter options: 15 / 18 / 20 mm; 18 mm is installed • Screw stroke: 80 mm • Maximum injection volume: 20 cm³ • Screw speed: 450 rpm • Screw torque: 75 Nm • Plasticising rate, 3-zone screw: 4.2 g/s _Injection Unit 1_ • Version: Standard • Injection rate: 83.97 cm³/s • Specific injection pressure, regenerative mode: 2,400 bar _Nozzle 1_ • Nozzle stroke: 210 mm • Nozzle contact force: 40.6 kN _Material Cylinder 1_ • Screw L/D ratio: 24 • Heating zones, including nozzle: 4 • Heating power: 5.1 kW • Note: maximum available equipment _Clamping Unit_ • Clamping force: 500 kN (approximately 50 tonnes) • Opening stroke + cylinder tolerance: 408 mm • Maximum distance between platens: 600 mm • Minimum mould height: 200 mm • Platen dimensions, horizontal × vertical: 500 × 450 mm • Drop-out chute width: 400 mm • Maximum mould weight on moving platen: 300 kg • Maximum mould weight on stationary platen: 300 kg • Maximum total mould weight: 600 kg • Dry-cycle stroke according to Euromap 6: 150 mm • Dry-cycle time according to Euromap 6: 1.60 s Mould weight notes: Knodpfx Aez Iyldelboc 1. Mould overhang according to mounting platens. 2. Less the weight of any rotary table. _Ejector 1_ • Ejector stroke: 100 mm • Ejector force: 39.8 kN _Drive Unit_ • Oil reservoir capacity – injection unit, main tank: 135 l • Oil reservoir capacity – clamping unit, auxiliary tank: 0 l _Machine Basics_ • Total weight without oil: 4.0 tonnes • Total connected power: 65.0 kW Transcription note: the small footnotes below the plasticising section specify reference materials and test conditions. They are not fully legible in this photo.

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Kedpfxsz Iz N Do Albenc Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,543 h, load capacity: 4,500 kg, lifting height: 4,250 mm, free lift: 1,940 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,150 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-12, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,620 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4500 – 2018 | 5,543 HOURS | DIESEL | DUPLEX 4,250 mm | WIDE FORK POSITIONER | FREE LIFT Ready to work from day one – no investment, no risk ✔️🚀 --- ### Why choose this forklift? Are you looking for a truck that keeps your business moving? ⚙️ This COMBILIFT C4500 is a proven machine, fully serviced – just step in and start working. No hidden costs, no surprises. * Complete service performed (all fluids, filters, comprehensive inspection of every component) ✔️ * Mechanical and cosmetic condition: as new ✨ * Only 5,543 genuine operating hours ⏱️ * New tires – no additional costs 🛞 --- ### Key specifications * Load capacity: 4,500 kg 💪 * Power unit: Diesel ⛽ * Mast: Duplex – 4,250 mm 📏 * Wide fork positioner: 3,150 mm ↔️ * Fork length: 1,300 mm * Cabin: enclosed / heated ❄️🔥 --- ### Full technical specification General data: * Year of manufacture: 2018 📅 * Operating hours: 5,543 ⏱️ * Load capacity: 4,500 kg * Load center: 600 mm * Machine weight: 6,700 kg Mast and lifting: * Mast type: Duplex * Max lift height: 4,250 mm ⬆️ Forks and attachments: * Wide fork positioner: 3,150 mm * Fork length: 1,300 mm Dimensions: * Height: 2,400 mm * Length: 2,500 mm * Width: 2,620 mm * Overall height: 3,000 mm Chassis: * Tires: superelastic (100%) – new 🛞✨ * Front: 200/50-10 * Rear: 27x10-12 Equipment: Kjdpfx Alsz I A Nlebsnc * Fully enclosed heated cabin ❄️🔥 * Wide fork positioner * Free lift ⬆️ Condition: * Technical: 5/5 – fully serviced ✔️ * Visual: fully refurbished, as new, no corrosion ✨ --- ### Ideal for: * Narrow aisle warehouse operations 🏭 * Timber, steel, and pipe industries 🪵🏗️ * Handling long or bulky loads 📦 * Both indoor and outdoor use 🌍 --- ### What you’re really buying This isn’t just a “used forklift”. You’re investing in a fully prepared, work-ready machine: * Every truck is thoroughly tested before delivery ✔️ * Ready for immediate operation 🚀 * Live online demonstration available 💻 * Delivery direct to your site 🚛 --- ### Delivery and support * Europe-wide transport 🌍 * Comprehensive logistics support 🚚 * Leasing and financing options 💼 * After-sales technical support 🤝 --- ### Why FT LOGISTICS? We deliver forklifts that work – not machines that spend time in the workshop. ⚙️ * Over 100 units in stock 📊 * In-house servicing and preparation 🔧 * Pan-European experience 🌍 * Hundreds of satisfied clients 😊 --- Contact us today 📞✉️ FT LOGISTICS – Quality you can rely on. Service you can trust.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON04, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE Ksdpfx Aljz Ipirobjnc via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Knodpfx Aljz Ipr Tebec Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-barless, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic operation Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the fixed platen Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic coolant regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Knsdpfxoz Ipvfe Albjc Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 84 mm, clearance between the columns: 910 mm, displacement volume: 2,050 cm³, injection pressure: 1,620 bar, injection weight: 1,886 g, mold height (min.): 350 mm, ejector force: 110 N, ejector stroke: 250 mm, plate width: 1,260 mm, plate height: 1,270 mm, total length: 7,200 mm, total width: 2,150 mm, total height: 2,230 mm, overall weight: 17,210 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 183 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN500D1-3330 D=84 Clamping force 500T Tie bar spacing 910x830 Tool installation height 350 to 900 Robot interfaces Euromap 67, Euromap 13 Suitable robot available upon request Basic standard equipment: • CE standard • KEBA-3018 control system • Thermal insulation cover for the cylinder • Energy meter, intelligent version • 2 sets of core pull • 1 set of air blow device on the moving platen • 1 set of air blow device on the stationary platen Knedpez I T E Defx Albsc • EUROMAP-67 interface • IT system • EUROMAP-13 core pull interface on the stationary platen • EUROMAP-13 core pull interface on the moving platen • 1 set of 6-way water distributor for the moving platen (11 l/min) • 1 set of 6-way water distributor for the stationary platen (11 l/min)

Year of construction: 1997, condition: reconditioned (used), functionality: fully functional, Automatic stop system for precise profile cuts with a length of 4200 mm Motor-driven stop with electronic length measurement Robust steel construction with PVC-coated rollers Kedpfoz H I D Sex Albenc Control via console with automatic repositioning The Microbo stop system enables precise and automated profile length measurement during sawing/punching/etc. The electrically operated slide moves on a ball bearing guide and is positioned via a numerically controlled system; the measurement is performed precisely from the center of the saw blade. PVC-coated rollers protect the profile surface and facilitate smooth sliding. All functions can be conveniently operated via the control console.

Condition: used, maximum load weight: 34,392 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 08/2025, next inspection (TÜV): 08/2027, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,737 mm, loading space volume: 92 m³, total length: 14,010 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, KRAKER 3-axle Walking Floor Semi-Trailer, 92 cubic meters First registration: 08/2025 Mileage: 91,240 km Unladen weight: 7,610 kg Knodpfxsz Iu Ute Alboc Permissible total weight: 42,000 kg Dimensions (L x W x H): 13,535 x 2,480 x front 2,692 and rear 2,782 mm BPW axles with large disc brakes, 430 mm WABCO Trailer-EBS Premium WABCO Smartboard WABCO OptiLevel 1st axle: lift axle Tires: 385/65 R 22.5 Tread depth, axle 1: 12 mm Tread depth, axle 2: 14 to 15 mm Tread depth, axle 3: 12 mm Crank-operated landing gear, full load capacity 4 LED work lights REMOTE control CARGOFLOOR floor, 21-slat system, 8 mm smooth Full-width sliding planks Cleaning door in the front wall, driver's side Wear plates at the rear on the side walls Reinforced tarpaulin roof, 900 g/m2 Folding rear gate RENTING is the new BUYING; with us, full-service rental is immediately available.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 105 mm, turning length: 1,500 mm, turning diameter over bed slide: 600 mm, swing diameter over cross slide: 365 mm, quill diameter: 68 mm, spindle speed (max.): 2,200 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 310 mm, travel distance Z-axis: 1,500 mm, spindle diameter: 250 mm, workpiece diameter between centers: 365 mm, distance between centers: 1,500 mm, CNC ECS 2400 Center height above the bed: 300 mm Knedpfx Asz Ig T Ielbec Spindle nose: CAM LOCK 8" Spindle bore diameter: 105 mm Spindle motor power – S1/S6: 9/13 kW Spindle speed ranges: 2 with automatic change Maximum spindle speed: 2200 rpm Spindle speed at constant power: 75/2200 rpm Spindle speed at constant power (I range): 10 + 75/430 rpm Spindle speed at constant power (II range): 40 + 380/2200 rpm Maximum spindle torque: 1650 Nm Maximum diameter on the bed: 600 mm Maximum diameter on the carriage: 365 mm Nominal distance between centers: 1,500 mm Controlled travel of axis "X": 310 mm Controlled travel of axis "Z": 1,500 mm Rapid traverse rate of axis "X": 10,000 mm/min Rapid traverse rate of axis "Z": 12,000 mm/min Continuous feed force of axis "X": 300 daN Continuous feed force of axis "Z": 1000 daN Tailstock bore diameter: 68 mm Tailstock travel: 220 mm Axial thrust of the tailstock: 1,200 daN Supply voltage: 400 V (50 Hz) Total installed power: 20 kW Machine complete with: • Self-centering chuck, Pinto, diameter 250, 3+3 jaws • Electric tool turret, 8 positions • Fixed steady rest • Operation and maintenance manuals • CE declaration of conformity

Condition: new, Year of construction: 2026, overall weight: 420 kg, total length: 31,000 mm, total width: 16,800 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This Profiline TP pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline TP is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be Knjdsz E Ik Nopfx Albec of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg. Our Profiline TP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities that takes up as little space as possible. Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Year of construction: 2026, condition: new, machine/vehicle number: KVK 3 Automatik_1, This automatic stretch wrapper with rotating turntable independently attaches the film to the pallet and cuts it after each wrapping cycle, unlike the semi-automatic KVK 3. Wrapping can conveniently be started by remote control—no need to get off the forklift or bend down to attach the film to the pallet. The machine is also equipped with a pre-stretch system for 250% elongation. This allows you to create up to 3.5 meters of wrapping film on the pallet from just 1 meter on the roll, greatly reducing your material consumption. Furthermore, the pre-stretch system applies minimal tension, so even lightweight goods remain stable and are not pulled from the turntable. At a weight of 700 kg, this model is very stable and engineered to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm diameter turntable and, as standard, can wrap pallets up to 2,400 mm high. Adjustable turntable and film carriage speeds, along with a potentiometer-controlled power stretch unit, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wraps. Program options include “up only” wrapping, “up & down” (cross-wrapping), and “waterproof” wrapping. Manual operation is also possible if required. Knjdpfx Aloz E Imqsbsc If you need to relocate the machine, it can easily be lifted and moved using cut-outs designed for forklift tines. Options: In addition to a matching access ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can also be optionally configured for wrapping heights up to 3,200 mm. This model is our clear recommendation if you are wrapping very lightweight goods or need to stretch-wrap more than approximately 30 pallets per day, with automatic film application and cutting. For further details, please see the technical data sheet attached as a PDF to this listing!

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Kedpfxoz E In Io Albsnc A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Knedpfx Ajz E Iwielbec This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Year of construction: 2018, thread length: 120 mm, overall weight: 2,200 kg, total height: 1,800 mm, total length: 1,800 mm, total width: 1,300 mm, Treading machine PEE-WEE - P10CNC MACH-ID 9816 Make: PEE-WEE Type: P10CNC YOP: 2018 Roll set M14 x 1 PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 Left PPS Ø 180 x 54 hole x 40 width Roll set M14 x 1,50 PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNF PPS Ø 180 x 54 hole x 40 width Roll set 1/4-28 UNJF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNF PPS Ø 180 x 54 hole x 40 width Roll set 5/6-24 UNJF PPS Ø 180 x 54 hole x 40 width 1 set universal linear guider 120 mm 1 set steady rest for to heavy workpiece Kjdpfxoz Ha Hle Albenc 1 set HM support length 40 mm for 1/4, 5/16 and M14 Rolls 2 x cabinet with tool drawlers and work bench Miniumum pressure: 1T Maximum pressure: 10T Max. workpiece: 40Ø Min. workpiece: 3Ø Min. Threading lenght:20mm Max. Threading length:120mm Shaft Ø: 54mm Length: 1800mm Width: 1300mm Height: 1800mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), 3-jaw chuck (diameter 250mm) tool holder device Kodpsz Huttofx Albjnc tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2006, condition: used, functionality: fully functional, For sale a bunker and vibrating screen, they are made for each other, the machines were originally used for mung bean sprouts. The machines are used but in good condition. the hopper/bunker is movable with small wheels, and the belt is speed controllable, the bunker has a small tipper, this tipper is at the moment not installed but only for space storage purposes, its bolted with 8 bolts. This tipper is moved manually with a forklift or hoist. The vibrating screen is good and movable with small wheels. Kodpfoz Ngt Ejx Albonc The sieve can be used also for other vegetables than mung beans sprouts. Both machines will be sold together. Price is for both machines. Price is negotiable!

Condition: used, empty load weight: 7,810 kg, maximum load weight: 28,190 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 05/2027, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, aluminum chassis, color grey, air suspension with lift function, raising and lowering, loading volume 90, lift axle on 1st and 3rd axle, portal doors, disc brakes, fixed side underrun protection, toolbox, 2x LED reversing lights, 4x LED reversing lights on the sides (2x on the support gear and 2x behind the axle assembly), 1x LED spotlight inside the cargo area, broom and shovel holder on the left side underrun protection (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL, 10mm ribbed, with additional plastic guides beneath the floor profiles, double wing doors (1/2 - 1/2 with upper door crossbar), radio remote control, rear door impact protection - aluminum buffers across the full width of the rear wall, roof bows and tarp, maintenance flap front left, working platform with access ladder, roll-up tarpaulin (PVC tarpaulin, Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production 5/2025, like new condition!!! Knjdpfx Asz S N Tgelbjc

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 92 m³, Chassis: Superstructure manufactured using a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength, cross members 140mm high – reinforced design (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semi-trailer construction max. total weight up to 39,000 kg) Axles and Suspension: Disc brake 22.5 Jost (DCA) axle units – off-road, 3x9t with DCA air suspension, ECAS lifting and lowering valve, Wabco Smartboard, electronic brake wear indicator BVA – can be read in the central control unit, 1st axle liftable with starting assist, 3rd axle liftable with Optiturn and Optiload without central control unit equipment, Wabco Trailerpulse – tire pressure monitoring system Tires and Wheels: 6 wheels with tires of size: 385/65 R22.5, tires approx. 60-70% on steel rims silver in 11.75x22.5 ET 120 King Pin: 2" king pin screwed into a 10mm steel plate Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with pivoting foot Knedoz S St Aopfx Albjc Braking System: According to EG standard, EBS-E system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation in front of the first axle on the left, aluminum air reservoir system Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with five-chamber lights type: Aspöck ECOLED 3, 24V system with 1x15-pole and 2x7-pole socket with side marker lights - LED flashing, 2x reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2x reversing lights in the lamp carrier, audio alarm when reversing Superstructure/Body: Body inside fully welded, reinforced side walls, front wall load 17,250 dkN, side wall load 13,400 dkN, rear wall load 10,400 dkN, aluminum body, side walls 30mm thick aluminum side wall profiles (2-3mm) 600mm wide, completely welded with upper and lower belts reinforced, plank profiles inside fully welded, floor laid as a sliding floor system on 140mm cross members, floor load capacity approx. 9t/m?, cross members mounted closely together (approx. 350mm), aluminum front wall with 600mm plank profiles (2-3mm) in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors 30/50mm thick with 2 rotating rod locks in the welded aluminum rear frame, attached in Teflon and INOX bearings, doors secured in the open position with two fixed stainless steel door latches, hard wear plates on the side walls approx. 2,000x1,500x4 mm fully welded, moving residual emptying wall with Kevlar fabric approx. 1,800mm long, plus side Kevlar fabric seal, service door in the front wall on the left, opening inwards Hydraulic System "Cargo-Floor" Sliding Floor System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD slide bearings plus anti-lift slide bearings, floor type: CF 10mm ribbed, end plate aluminum, hydraulic cylinder with approx. 200mm working stroke, hydraulic connection between the support legs with a separate possibility for connecting the hydraulic line to the front wall, load compartments to be specified, line size NW 21, operating pressure 190-max 250bar, aluminum end pieces welded into the sliding floor, control console in front of the first axle on

Condition: new, mileage: 70 km, power: 140 kW (190.35 HP), overall weight: 7,490 kg, fuel type: diesel, color: white, total width: 2,150 mm, total height: 2,265 mm, number of seats: 7, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU Commercial Vehicle Center in Germany, specializing in expertise, service, and consultation, offers you: ISUZU M30 M Double Cab, 7-seater, wheelbase 4,475 mm Kodpfx Alsyl D Dcsbjnc Chassis Net price / Export price: from €51,258 2-year warranty on the basic vehicle from the date of first registration or up to 100,000 km Standard equipment: - 5.2 L turbo diesel with common rail direct injection, 140 kW / 190 HP, EURO VI OBD-E (max. torque 510 Nm at 1,600 – 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system allows filter cleaning without a workshop visit, thanks to the new DPD regeneration technology that indicates when the function is needed. You simply need to press the DPD button and in 20 minutes the system cleans itself) - 6-speed manual transmission or automated manual transmission (NEES II) with 6 gears and torque converter (surcharge net €1,656) and with cruise control. Wear-free and finely controlled starts are made possible by the installed fluid coupling! Gears can also be changed manually at the selector lever. Depending on the load, the driver can preselect via a button whether the vehicle should start in 1st or 2nd gear. - Front leaf suspension (max. 3,100 kg), rear leaf suspension (max. 5,800 kg), front and rear stabilizer bars - Tires 215 / 75 R17.5 C, single tires at the front - Dual tires on the driven rear axle, spare wheel - Ventilated disc brakes front and rear - Cruise control, speed limiter (90 km/h) - Engine brake - Electric parking brake - On-board voltage 24 V, alternator 90 A, 2x batteries 90 Ah - Diesel tank 100 L / AdBlue tank 16 L - New, modern cab with excellent space utilization, generous headroom, ample knee space, outstanding ergonomics and visibility, low entrance height - Optimal visibility at night provided by BI-LED lighting with headlamp cleaning system - Double door seals to reduce noise intrusion into the cabin and enhance acoustic comfort - Cigarette lighter, cup holders, storage compartments in door panels and roof lining, armrests in door panels - Cab paint: Arc White 729 - Vehicle dimensions: cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm - Suspension seat for driver - Twin passenger bench seat, 3-seater, headrests, seat belt warning system - Driver and passenger airbags, seat belt pretensioners for driver and passenger - Height- and tilt-adjustable steering wheel, multifunction steering wheel, inside mirror - Electric windows - Electrically adjustable and heated external mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8" with Bluetooth hands-free system, Apple CarPlay/Android Auto compatible, USB charging port - 7" driver information display - Fog lights, daytime running lights, automatic headlight control - Reversing warning signal - Central locking with remote control - Manual air conditioning - Digital EU control unit (tachograph) Safety Pack 2 Equipment: - ABS: Anti-lock Braking System - ASR: Traction control for rear axle - EBD: Electronic Brakeforce Distribution - EVSC: Electronic Vehicle Stability Control - LDWS: Lane Departure Warning System - MOIS: Moving Object Detection - DWS: Distance Warning System - MAM: Emergency Braking for Obstacles - FVSN: Forward Vision Detection - DDAW: Driver Drowsiness Alert System - TSR: Traffic Sign Recognition - TPMS: Tire Pressure Monitoring System - RM: Reversing camera with monitor - AEBS: A...

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills. Knedsz N R Umspfx Albjc

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use Ksdjxhfpdspfx Albsnc The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Kodpfsxztydex Albsnc Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: Knjdpfev Tnhwox Albec ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Knodpfx Aox Rhwljlbec Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm