Used Imagelaz Photograv Photo Laser Engraving Software for sale (16,141)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Ndsdpfsz En Axex Af Sjb Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, Q-Fin F200 deburring and grinding machine with conveyor belt For sale: Q-Fin F200 deburring and grinding machine for professional surface treatment, equipped with a conveyor belt. Nsdpoz A A E Asfx Af Ssdb This compact industrial machine is suitable for the efficient post-processing of metal parts. Ideal for deburring, grinding, and improving the surface of workpieces after, for example, sawing, milling, laser cutting, or other machining operations. The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine details: Brand: Q-Fin Type: F200 Deburring and grinding machine For surface treatment of metal parts Equipped with a conveyor belt Suitable for series production Compact industrial design Year of construction: 2014 (second owner) Includes: grinding media / accessories Optional: Dust extraction system (at an additional cost - year of construction 2021) The conveyor belt enables efficient and consistent product flow, making the machine very suitable for the rapid and reproducible post-processing of larger quantities of parts. The machine is currently still installed and can be viewed in working condition by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 35 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 12,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 10,000 mm, space requirement width: 2,550 mm, Equipment: cooling unit, safety light barrier, Our flagship model: G3015 HF Expert 12KW Fiber Laser Cutting Machine The price includes delivery, installation, training, CAD-CAM software, and filtration system. Machine location: Germany. Delivery within Germany is free of charge. The HF Expert is one of our highest-quality and most compact fiber laser cutting machines. It is the perfect entry into professional laser part manufacturing and serial production. Han’s Laser stands out with utmost precision, robust industrial quality, and state-of-the-art fiber laser technology, and ranks among the industry’s leading manufacturers with around 17,000 employees and over 100,000 machines sold worldwide. This machine is ideally suited for steel fabricators, sheet metal workers, and series production facilities looking to cut up to 50 mm steel with 12 kW laser power while minimizing post-processing requirements. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a similar plasma system or CO2 laser system with the same cutting capacity. German customer service in NRW (Rhineland region) with 400m² parts warehouse. German-speaking telephone and on-site support with short response times. All our machines are installed and serviced by us. 80% of the machine’s components are German or European-made. 1.5 x 3 m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions: Length [mm]: 10000 Width [mm]: 2550 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW Cutting capacity at 6 kW: Steel - 25 mm, Stainless steel - 18 mm, Aluminum - 18 mm Cutting capacity at 12 kW: Steel - 35 mm, Stainless steel - 35 mm, Aluminum - 25 mm Nodpfxsv Nzt Eo Af Sjdb • Fully enclosed for laser safety • Compact design reduces shipping costs and shortens installation time • Improved accessibility with side sliding door running the full length • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to powerful control and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response with “Remote Service” • Fully enclosed machine with OD5+ laser safety windows • Small footprint • Versatile operation with adjustable control panel, front door, and side sliding door Higher Dynamics & Productivity • The optimized machine bed and extruded aluminum portal, equipped with the fast real-time Han’s 901 controller (Rexroth) and powerful Rexroth motors, enable the HF Mini S to reach extremely high speeds and acceleration. Configuration and component selection: Control system: Han’s 901 (Rexroth, Germany) Servo drivers: Rexroth, Germany Cutting head: Precitec, Germany Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Exchange table: Han’s, China

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Nsdpfxei Apfzj Af Sjdb Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer 7. Yaskawa servomotor 8. SHAC guides 9. Integrated power control 10. FScut 5000 software 11. Integrated electrical cabinet 12. HANLI water chiller 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Year of construction: 2020, condition: like new (used), Sympatec laser diffraction system. HELOS/BR multi range, laser diffraction sensor for particle analysis with automatic set-up of selectable measuring range of up to 5 range modules between 0.1 micron – 875 micron. RODOS, dry dispersing system, injector diameter 4 mm, bulk hardened steel; with funnel adapter, including flow – optimized extraction, recommended particle size range: product dependent up to 1500 micron. VIBRI, intelligent vibratory feeder, for the RODOS or GRADIS system family, complete, comprising chute, input funnel 150 cm3 and connecting cable for RS485. SUBMICRON module, R2, for HELOS/R multi range series, measuring range: 0.25/0.45 – 87.5 micron. TOPMICRON module, R4, For HELOS/BR multi range series, measuring range: 0.50/1.8 – 350 micron. Nilfisk ATTIX 33-2H PC, 230V AC, dust class H Computer system Ndodpsh Nyfcofx Af Sjb Fujitsu ESPRIMO E957 E90+, i7-7700 3,60GHz, SSD. Fujitsu TFT display 27” PAQXOS software, for the operation of all Sympatec instruments with TCP/IP communication, for computers with Windows 7 or 10, on data storage media, including documentation and software protection key.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 8,065 h, machine/vehicle number: 8008, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BECKHOFF, laser type: fiber laser, laser source manufacturer: nLight, laser source model: 15000, laser power: 15,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, table length: 25,100 mm, table width: 3,100 mm, table height: 900 mm, working length: 25,100 mm, working width: 3,100 mm, working height: 900 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.35 mm, workpiece weight (max.): 24,750 kg, type of cooling: water, overall weight: 55,000 kg, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We are offering for sale a state-of-the-art NUKON EXTREME LARGE laser cutting machine from 2022, equipped with a 15 kW nLIGHT fiber laser source with Corona technology, CNC control, and Beckhoff drives. The machine is in continuous production use, fully operational, and available for viewing during operation. This solution is designed for the most demanding production facilities engaged in cutting large-format parts, steel structures, and thick sheets. Technical data: Manufacturer: NUKON Model: Extreme Large 30250 BEVEL Year of manufacture: 2022 Laser power: 15 kW Laser source: nLIGHT Fiber Laser with Corona technology Working area: 3000 × 25000 mm Cutting head: BEVEL – bevel cutting up to ±45° CNC control: Beckhoff Servo drives: Beckhoff Equipment and advantages: - High-performance nLIGHT laser source equipped with Corona technology, enabling dynamic adjustment of the laser beam characteristics depending on the material type and thickness, resulting in higher edge quality, faster piercing, and increased production efficiency; - Professional Beckhoff control and automation system, valued for its speed, precision, and reliability in industrial applications; - BEVEL cutting head, allowing for the execution of welding bevels without the need for additional processing; - Ability to cut large-format sheets up to 25 meters in length; - High dynamic performance and excellent cutting quality; - Ideal for the production of steel structures, components for heavy industry, energy, offshore, shipbuilding, and machine manufacturing. Technical condition: The machine was commissioned in 2022 and has been in operation at a production facility ever since. It is regularly serviced, is in very good technical condition, and is still in use, allowing for the possibility of conducting tests and viewing the machine during operation in production. Nodezphkmjpfx Af Sodb The buyer has the opportunity to perform their own cutting tests and thoroughly check all the functions of the device before purchase. Upon request, we can provide additional photos, videos of the machine in operation, and a complete technical specification. We invite you to contact us for detailed information and to arrange a demonstration of the machine. PRICE: 300,000 EUR

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 6,000 h, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Bodor, laser hours: 2,000 h, laser power: 12,000 W, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, power: 12 kW (16.32 HP), input voltage: 380 V, input current: 130 A, type of input current: three-phase, type of cooling: water, total length: 7,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a Bodor P3 12kW fiber laser cutting machine in excellent condition. The machine is being sold due to a recent upgrade. Nodpsyr Ddcsfx Af Sjdb The system features a laser power of 12,000 watts and a table size of 3000 × 1500 mm. Year of manufacture is 09/2022. This machine is ideally suited for precise and rapid sheet metal processing in industrial applications. The Bodor P-Series stands out for its high dynamics and speed, with traverse speeds of up to 200 m/min and acceleration up to 1.8G, enabling efficient production workflows. It also offers high positioning accuracy of around ±0.05 mm. Typical cutting capacities (depending on material and parameters) are: Mild steel up to approx. 25–35 mm Stainless steel up to approx. 15–25 mm Aluminum up to approx. 12–15 mm Key technical data (extract): • Laser power: 12 kW fiber laser • Working area / table size: 3000 × 1500 mm • Max. traverse speed: up to 200 m/min • Positioning accuracy: ±0.05 mm • Max. table load: approx. 1,200–1,450 kg • CNC control with touchscreen and nesting software The machine can be inspected and demonstrated by appointment. For questions or if you are interested, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15.2015.70.04.352, total length: 3,930 mm, table length: 2,000 mm, total width: 2,290 mm, table height: 1,300 mm, Wissner WITEC 2015 Eco milling machine for sale For sale: Wissner WITEC 2015 Eco CNC milling machine. A robust and precise milling machine from the German brand Wissner. This machine is suitable for a wide range of milling and machining operations and has been used in our production processes. The machine is being offered for sale due to the cessation of our business activities, making it available for purchase. Features: Brand: Wissner Type: WITEC 2015 Eco Serial number: 15.2025.70.04.352 CNC milling machine Robust industrial design Suitable for precise milling operations Year of manufacture: 2004 Includes: extraction system / vacuum pump / cooling system / tools / software / etc. The machine is currently still installed and can be viewed in working condition by appointment. An interesting machine for companies looking to expand their production capacity or seeking a professional CNC milling machine or spare parts. Nodez A Azqjpfx Af Sedb If you have serious interest or questions about the machine, please feel free to contact us. Additional photos, videos, and technical information are available upon request.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Ndsdpfxsvmwxxo Af Seb Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Ndodszqggvepfx Af Seb Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. Nedpszi Svmsfx Af Sjdb I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 17 h, laser power: 100 W, This 3-axis Trotec Rayjet R400 was manufactured in 2021. It features a powerful 100 W DC CO2 laser source and a generous working area of 1030 x 630 mm. The machine is equipped with an air assist system, LED lighting, and a control panel for precise laser positioning. If you are looking to get high-quality laser engraving capabilities, consider the Trotec Rayjet R400 laser engraving machine we have for sale. Contact us for further details. • Laser source: 100 W DC CO2, water-cooled • Working area: 1030 x 630 mm • X travel: 1030 mm • Electronic Z-axis • 2.0" focusing lens • Air-cooled optics • Air assist system with internal air distribution • Nozzle diameter: 7 mm (0.27") • Red pointer laser indicator • Control panel for laser positioning Nsdpoy N Tnyefx Af Sjdb • LED lighting • Safety switch • Software: RayJet Manager printer driver and RayJet Manager software Additional equipment • CW-5200 water chiller • Aluminum cutting grid table • Exhaust system without filtration – 1800 m³/h • External air assist pump

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Nodpfxjz A Syco Af Ssdb Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: good (used), Year of construction: 2015, For Sale: Trotec Speedy 400 Laser Plotter – 80 Watt (Year 2015) Working area: 1000 x 600 mm, with pass-through capability. Ndsdpfxsxfvkgs Af Sob The mechanical condition is good. The software and activation keys are included with the machine. The laser tube wear is consistent with the machine's age and usage.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Ndsdsxxih Eopfx Af Ssb Linear motors on all axes Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Protective lenses

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Nodpfx Afey Rq Hio Sedb Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Location on request! Collection or transport can be arranged.

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Ndodpfx Asvt Dwbjf Ssb Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 - Two Station Index Rotary Positioner - Equipment available after project completion, available from October 2026 Ndedpfszy T Tzex Af Seb - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks Ndodpfx Aeyacwkjf Ssb We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Ndodpfszzpwrox Af Ssb Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter Nodpfozwd Hysx Af Sjdb High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, year of last overhaul: 2026, We are offering this very well-maintained TRUMPF TruLaser Weld 1000 laser welding machine, year of manufacture 2023, with low operating hours. The machine has been serviced annually by TRUMPF, with the most recent service carried out in April 2026. The machine is powered on and fully equipped with two rotary axes. Programming is performed directly on the machine, without additional software required. Ndedpfx Asy I Ak Usf Seb The machine is still in production. Available for delivery in August 2026. Manufacturer: TRUMPF Model: TruLaser Weld 1000 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Nedpfslfilyjx Af Sedb Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: good (used), operating hours: 20,080 h, functionality: fully functional, machine/vehicle number: Kf262 622 E35, overall weight: 720 kg, load capacity: 12 kg, arm reach: 2,665 mm, pivoting range: 300 °, Equipment: documentation/manual, Complete automated glazing and handling solution For sale is an automated robot glazing cell with a Kawasaki 6-axis glazing robot, a Yaskawa handling robot, a CeramDetect 3.0 workpiece recognition system, a base cleaning machine, and a feeding and transport system. System overview: - Complete automated robot glazing cell for ceramic sanitaryware - Automated material flow from the feed conveyor, via workpiece recognition and carousel, to the glazing, base processing, and transfer to the transport system - Designed for different sanitaryware models - Sold as a complete process solution with robotics, recognition, and handling Glazing robot: - Manufacturer: Kawasaki Robotics. Type: KF262, 6-axis industrial robot, used for automated glazing/coating of sanitaryware Handling/transfer robot: - Manufacturer: Yaskawa Europe GmbH - Series: Motoman ES165D - Robot type: YR-ES0165D-B00 - Controller: Yaskawa DX100 - Date according to nameplate: 03.10.2013 - Power supply: 3-phase, 400 / 415 / 440 V, 50 / 60 Hz - Average power: 5.0 kVA - Full load current: 14.4 A - CE marking present Ndjdpfx Aszz Ra Usf Sob - Function: automated transfer between carousel, base cleaning station, and transport system Workpiece recognition – CeramDetect 3.0: - CeramDetect 3.0 for automatic workpiece and position recognition - CeramDetect laser module and camera - Recognition in the area of the transfer from the feed conveyor to the carousel - The existing CeramDetect software is offered together with the system Base cleaning machine: - Automated base cleaning machine as part of the robot cell - Transfer and removal are carried out by the Yaskawa handling robot Other system components: - Feed conveyor for workpiece feeding - Automated transfer device from the feed conveyor to the carousel - Carousel for positioning and transferring the workpieces - Transport system for receiving the finished workpieces - Protective and safety devices - Control and electrical components of the entire system Material flow: 1. Feeding of the sanitaryware via a feed conveyor 2. Removal of the workpieces from the feed conveyor via an automatic transfer device 3. Transfer of the workpieces to the carousel 4. Workpiece recognition takes place at the transfer position using CeramDetect 5. Type and position of the workpiece are recorded for the automated glazing process 6. Transport of the workpiece on the carousel to the glazing position 7. Automatic glazing by the Kawasaki 6-axis glazing robot 8. Transfer of the workpieces by the Yaskawa handling robot to the base cleaning station 9. Transfer to the base cleaning station and subsequent removal 10. Placing the workpieces on a transport system Special advantages: - Automatic workpiece recognition and position determination - Flexible processing of different sanitaryware models - Combination of glazing robotics, automated handling, and base cleaning - Complete process cell instead of individual robot components Scope of supply and notes: - The sale includes the existing components of the described robot glazing cell - Technical documentation, circuit diagrams, robot programs, and existing software versions will be provided with the system, subject to availability - Dismantling, loading, and transport need to be coordinated Further technical details can be provided.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Here is an offer for a highly precise laser cutting machine with 3000 watts of laser power. Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching system (Pressure and gas type can be controlled in the software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory material - Machine bed and axes measured and adjusted with Renishaw interferometer Our goal is to offer the best, most stable, and most affordable laser machines currently available on the market. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class on-site service. Please also note our favorable leasing/hire-purchase offers. New machine, delivery time approx. 6-8 weeks. We would be happy to demonstrate the machine at our premises. Travel range: approx. 1300 x 1300 mm Ndsdpfx Asi Igauof Sob Table area: approx. 2500 x 1300 mm (i.e., there is space in the machine for a medium-format sheet) Extendable cutting table For highly precise cutting of metal Everything fully installed and adjusted Cutting software in German Incl. control box module Very easy to operate Switch on and get started Laser source from Max Photonics (G5/German version) with 3000 watts of power Extensive electronic and mechanical collision protection measures for the cutting head Large laser protection window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting of stainless steel up to 12 mm Cutting of steel up to 22 mm Cutting of aluminum up to 12 mm Cutting of brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200 mm pipe connection for fume extraction Incl. extraction fan Leasing or hire-purchase is possible through our financing partner. Different power output or table size required? - No problem, we have several machines in stock or available in the short term. The sale is exclusively to commercial businesses. Delivery/consultation/sale only in Germany/Austria/Switzerland. Machine dimensions approx.: Width: 3.5m, Height: 2.1m, Depth: 3.5m Weight: approx. 3.5 tons