Used Iai Ix-Nnn3515-5L-T2 Mit Steuerung for sale (10,601)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. Itjdpsyxr T Tsfx Afksh The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 22, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 517 – order vehicle Base vehicles available in various configurations (including full equipment and Sprinter 519). Example of base vehicle configuration: Itodpfxoy Ubxds Afksh - Front air conditioning system Tempmatic 7 kW - Hot water auxiliary heater with timer 5 kW - Multifunction steering wheel, adjustable for height and inclination - Heated driver’s seat - Storage compartment above the dashboard - Parking package with reversing camera - 9-speed automatic transmission - Fog lights - Optional LED headlights Vehicle has GSR 3 systems: e.g. - Driver Comfort Package - Reversing camera - Blind Spot Assist - Turn Assist - MBUX 10 inch (radio with Bluetooth, Apple CarPlay, touchscreen) - Tire pressure sensors - Attention Assist - Active Lane Keeping Assist - Traffic Sign Assist - Intelligent Speed Assist - Distance Assist - Rain sensor - Electric exterior mirrors - Cruise control Vehicle modification: - Length 7867 mm due to rear extension without visible seam - Large electric door with recessed step (optionally also double-width or positioned at the front) - Webasto / Diavia 12 kW air conditioning system - Luggage compartment on the left - Side windows, double-glazed, black tinted - Flooring by Gerflor in wood look (other options available upon request) - 21 sleeping seats with seat covers according to customer's choice within our sample range - Multi-level interior lighting - Bumper painted in vehicle color upon request - Optional trailer hitch Modifications such as refrigerator, DVD, trailer hitch, etc. can be carried out optionally. Net export possible. This is an example vehicle with example images (some of which show optional extras). This vehicle is not in stock. The delivery time is approximately 3 months. Comparable vehicles can be viewed upon request.

Condition: good (used), - Type: GS - 250 - serial no.: 14 Ijdpfjrgqp Njx Afkjth - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm - max.: L1700mm x W1300mm x H900mm - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW - Price on request

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be set up Cell with Kuka KR 180 grinding robot Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6,300 kg - Cell dimensions: approx. 4,650 x 2,400 x 3,100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture: 2011 - KRC 4 controller - Additional axis (7th axis) Belt grinding station BSS10 - Max. belt dimensions: 3,500 x 30 mm - Max. contact wheel diameter: 200 mm - Motor power: 4 kW 2 x polishing stations, - Polishing wheel diameter: 350 - 600 mm - Power: 5.5 kW Gripper change cabinet Belt conveyor Interoll Automation GmbH - Total length approx. 2,000 mm - Belt width approx. 440 mm Isdpfx Afsg Saqveketh The price includes a complete concept as shown in the video. We have 4 such cells available. It is possible to customize every detail as shown in the video.

Condition: used, mileage: 36,032 km, power: 130 kW (176.75 HP), first registration: 05/2025, fuel type: diesel, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 5-year manufacturer's warranty for Germany, starting from the initial registration. * 6-seater double cab with partition. * Storage compartment package 2: Roof console with two 1 DIN slots and reading light. * Exterior mirrors, electrically adjustable, heated, and foldable. * Air conditioning with manual control in the driver's cab. * Multifunction steering wheel. * Seat covers in fabric, "Austin" design. * Seat heating, left and right, separately adjustable, in the 1st row of seats. * Central locking with keyless start system "Keyless Start", without safe lock. * 2 USB-C data/charging ports (center console) with increased charging power and 2 USB-C charging ports (center, windshield). * 4 speakers: 2 tweeters, 2 woofers. * Digital Cockpit Pro. * Digital radio reception (DAB+). * Mobile phone connectivity via Bluetooth with inductive charging function. * Wired & Wireless App-Connect. * Prepared for VW Connect and VW Connect Plus. * Hill start assist. * Driver alertness system and fatigue detection. * Airbag for driver and front passenger with front passenger airbag deactivation. * Electronic Stability Program (ESP) incl. ABS, ASR, EDS, SWA. * High beam control "Light Assist". * Front Assist with warning and braking on vehicles, pedestrians, and cyclists. * Electronic parking brake. * Engine start-stop system with brake energy recuperation. * Multifunction camera. * Emergency call system eCall, prerequisite: availability of required mobile networks. * Park Assist and parking assistance system in the front and rear area including side protection. * Rear view camera "Rear View". * Lane assist "Lane Assist". * Traffic sign recognition. * Immobilizer, electronic. * Windshield wiper interval control with light and rain sensor. * Side wind assist. * 12V socket in the driver's cab (in the dashboard). * 2 remote control folding keys. * 4 steel wheels 6.5 J x 16 with 1,050 kg load capacity, in silver. * Diesel engine 2.0 L/130 KW (4V) TDI. * 6-speed manual transmission. * Turning assistant. * Emission standard EU6e (EA) // WLTP3 N1-III, N2. * Lighting in the cargo area: 4 LED spotlights. * Assistance package Professional incl. Park Assist and parking assistance system in the front and rear area including side protection. * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle view. * Front passenger double seat right, with storage compartment. * C-rails on side walls and partition. * Three-point automatic safety belts with belt height adjustment and electric belt tensioners in the front. * One towing eye in the front. * Grab handles on the rear pillars. * Electrical connection block and preparation for functional control unit. * Vehicle registration with a permissible total weight of 3.5 t. * Halogen double headlights. * Grab handle on the partition in the cargo/passenger compartment. * Wooden floor and wheel arch lining in the cargo/passenger compartment. * Infotainment system with 26 cm (10.4") touch color display. * Enhanced interior noise damping. * Fuel tank with 75 l tank volume. * Light and Visibility Package. * Compliant with UNECE CS&SU. * Radio Composition with 26 cm (10.4") touch color display with 4 speakers. * Medium wheelbase (MR) - 3,640 mm. * Tire pressure monitoring system (directly measuring). * Dashboard with additional console including 1 DIN slot and 4 additional switch slots. * Hinges for rear wing doors with enlarged opening angle (max. 270°). Isdpfxoy T A Iwo Afksth * Disc brakes front, 16" (diameter 303 mm). *

Condition: good (used), mileage: 87,240 km, power: 75 kW (101.97 HP), first registration: 03/2022, fuel type: diesel, tire size: 195/65R15, axle configuration: 4x2, wheelbase: 2,790 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,400 mm, total width: 1,800 mm, total height: 1,850 mm, loading space length: 1,590 mm, loading space width: 1,310 mm, loading space height: 1,180 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 683 kg, Tare weight: 1337 kg, Gross vehicle weight: 2020 kg, Unbraked towing capacity: 710 kg, Braked towing capacity (center axle): 1500 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assist: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 75 kW (101 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, air conditioning, navigation, parking distance control, 87,000 km, Tire type: Summer tires = Additional Information = General Information Number of doors: 1 License plate: VPH-24-Z Itsdpfjy Tuziex Afksh Axle Configuration Tire size: 195/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth (left): 5 mm; Tire tread depth (right): 5 mm Axle 2: Tire tread depth (left): 4 mm; Tire tread depth (right): 3 mm Weights Unladen weight: 1,337 kg Payload: 683 kg GVW: 2,020 kg Functional Loading area height: 57 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €191 per month (delivery van, 72 months); Inquire for more information and terms.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 91130417, Year of construction: 2018, operating hours: 320 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,550 mm, load center: 600 mm, mast type: triplex, construction height: 2,200 mm, battery model: PzS, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,150 mm, Equipment: UVV, Jungheinrich ETV 216 reach truck with a 500DZ triplex mast, in very well-maintained condition. The unit has few operating hours, an integrated side shifter, full free lift, and a compact design. Iedpfxoy Tpuke Afksth Technically and visually in good overall condition, ready for immediate use, including charger. Export and transport are possible.

Condition: new, Year of construction: 2026, Recirculating chamber furnace, electric, brand new, delivery time 16 weeks - Maximum temperature: 300°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Capacity: 8,820 liters Itsdpfxsv Hg Eue Afkeh - Eurotherm Nanodac controller/recorder with color touch display - 2 circulating air fans - Double door with safety door sensors - Over-temperature protection, Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical configuration: 400 V / 50 Hz / 3NPE - Increased heating capacity of approx. 70 kW - Temperature accuracy: +/- 6 K in the empty oven - Documentation and CE declaration of conformity - Electrical schematic with spare parts list Note: The oven floor is not insulated but is covered with stainless steel sheet. This allows unrestricted access with all track widths. Alternatively, an insulated floor can be offered (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Keywords: oven, ovens, drying oven, industrial furnace, drying cabinet, heating oven, heat cabinet, recirculating oven, chamber oven, heating chamber, chamber recirculating oven, tempering oven, annealing oven.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Completely overhauled, in stock, 12-month warranty, not a solvent oven! - Max. temperature: 250°C - Total steam volume: 20.5 m³ - Usable dimensions (LxWxH): 2300 x 2750 x 2200 mm - Control system: Jumo Imago 500 - Heating capacity: 36 kW - Max. load for the oven cart: 6000 kg, electrically driven - Electric supply and exhaust air dampers: Belimo - Exhaust fan controlled via frequency converter - Installation dimensions (LxWxH): 3000 x 3000 x 3125 mm plus rails in front of the oven - Own weight approx. 3,500 kg - Free-standing control cabinet - Documentation included - Electrically tested and supplied with a current DGUV measurement protocol Inspection at our warehouse by appointment. Itedpfsttbf Uox Afkoh Car bottom furnace, oven, ovens, industrial furnace, convection oven, chamber convection oven, tempering furnace, heat treatment furnace, drying oven, annealing oven, chamber oven, drying cabinet, hardening oven,

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg Iedpfx Aey Iwm Rsfketh EQUIPMENT Heidenhain digital readout Multifix tool holder Coolant system Machine lamp

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Itjdpfx Aey Rh Nzjfkeh Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: good (used), mileage: 38,216 km, power: 75 kW (101.97 HP), first registration: 02/2021, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 2,980 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, total length: 4,750 mm, total width: 1,850 mm, total height: 1,800 mm, loading space length: 1,780 mm, loading space width: 1,430 mm, loading space height: 1,180 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Payload: 977 kg, Tare weight: 1398 kg, Gross vehicle weight: 2375 kg, Trailer load, unbraked: 740 kg, Trailer load, center axle, braked: 1000 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 3, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Seat heating, Bluetooth, Engine power: 75 kW (101 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2 Airco Navi WP-Inrichting PDC 3 Seats BPM Tax-free Euro6 102 hp!, Spare wheel, Tread depth of spare wheel: 3%, Tire type: Winter tires = Further Information = General Information Number of doors: 1 License plate: V-73-PHJ Axle Configuration Tire size: 205/60R16 Brakes: Drum brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,398 kg Payload: 977 kg GVW: 2,375 kg Functional Loading platform height: 58 cm Maintenance APK (Technical Inspection): valid until 02.2027 Itodpfxjy Rd Nqo Afkjh Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €220 per month (van, 72 months); Ask for more information and conditions.

Condition: good (used), Burning cutting device with turntable ideal for welding stages burning Turntable diameter 285 mm maximum burning diameter 600 mm GES. Height 1150 mm Ijdod Dti Ispfx Afkjth Width 900 mm Depth 500 mm

Condition: used, 600 - 700 Isdpscipmmjfx Afketh with interchangeable inserts and control end measures in a wooden case

Condition: excellent (used), Clamping disc with T-slots diameter 485 mm Bolt circle diameter 118 mm Hole spacing 170 mm Isdpofm Tq Tefx Afkjth

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections Iedpfsh R Taqex Afkoth - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: Ijdpfxomhhy Nj Afksth - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Itodpfx Asykugxjfkeh Illustration may contain options subject to surcharge

Year of construction: 2021, operating hours: 10 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Iedpfxox Ta Nxs Afkjth Prices ex stock Ludwigsburg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable Ijdpfx Ajyktv Ssfketh - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Itsdpfjykuhcsx Afksh Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Itedpfx Afoykub Ajkjh Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 5-hole steel rim -Type: 6.50F-10 ET 25 41042 106 -Hub bore: Ø 110 mm -Bolt circle: Ø 145 x 19 mm -Quantity: 10x rims available Itjdpfx Afoyvgu Heksh -Price: per piece -Dimensions: Ø 300 x 200 mm -Weight: 11.4 kg/pc.

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Pumps were dismantled in working order. Iedpfowi Icxjx Afksth Dismantled and packed on several pallets. Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Iedpfxoyym Saj Afkjth