Used Hole Punch Mubea Klh 500 for sale (19,879)

Condition: used, This listing is for the APC Back-Ups CS 500 UPS The unit is in full working condition and is ready for immediate use Key Specs & Performance Capacity: 500 VA / 300 W – suitable for basic PC setups, modems, routers, or low-power peripherals Runtime: ~2.4 minutes at full 300 W load ~13.8 minutes at half load (150 W) Topology: Off-line (standby) UPS with ~6 ms transfer time Waveform Output: Stepped approximation to a sine wave Connections & Interfaces Input Connection Type: IEC 60320 C14 Output Connection Types: 3 × IEC 60320 C13 (Battery Backup + Surge Protection) 1 × IEC 60320 C13 (Surge Protection Only) 2 × IEC jumper surge-protected outlets Number of Cables: 2 included Data-Line Protection: RJ-11 phone/fax/DSL line Fodjxv Duzjpfx Akyjpn Communication Ports: USB + optional RS-232 Management Software: Supports APC PowerChute Personal Edition Battery & Power Battery Type: Sealed lead-acid maintenance-free (VRLA) Battery Cartridge: APC RBC2 Battery Recharge Time: ~8 hours User-replaceable: Yes, hot-swappable Battery Life Expectancy: 3–6 years Cold-Start Capable: Yes Self-Test: Automatic periodic testing Surge & Safety Features Surge Energy Rating: 300–310 J Noise Filtering: Full-time EMI/RFI filtering Audible Alarms: Yes – for battery use, overload, low battery LED Indicators: Status display panel Certifications: CE, VDE, GOST, C-Tick Resettable Circuit Breaker: Included Physical Characteristics Height: 16.5 cm Width: 9.1 cm Depth: 28.4 cm Net Weight: 6.03 kg Color: Beige/Light grey (typical for CS series) Noise Level: Approx. 40–45 dBA

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened Fsdpfx Aeywcl Rokyspn by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Year of construction: 2026, neu 2026 090237 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 Fpodpewirmbsfx Akysn 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 249800 € 30 to 2500x1250 mm 2500 mm 1250 mm 116 m/Min 80 m/Min 140 m/Min 40 mm 1200 1/Min 425 1/Min 3200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm Fodpfx Akeynnayjyopn 0,05 mm 22 U/Min 150 U/Min 120 kg 940 mm 6 bar 88.9 mm 15 kW 5750 mm 6800 mm 5360 mm 7360 mm 2310 mm 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 x D-Station fix: 50,9 - 88,9 mm 3 x D-Station index: 50,9 - 88,9 mm Infra-red light barriers according to CE rules Price FCA Türkiye

Condition: used, this listing is for Cytiva Axichrom 100/500 chromatography column the unit is in full working condition and ready for immediate use This pilot-scale column features automated axial compression for repeatable bioprocessing and downstream purification. Fedpfxezqf E Rj Akyspn Transparency report and technical audit: Software and media disclosure: as a direct-from-lab asset, any original software media or accessories found with the unit are included as a courtesy. licensing notice: we do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for procurement: This unit is sold as-is. while we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. ideal for labs with in-house technical expertise or existing service agreements. Sustainability impact: By choosing direct reuse, your facility avoids the carbon footprint of new manufacturing

Condition: used, This listing is for 1 of 11 Invitrogen Powerease 500 Power Supply. The unit is in full working condition and is ready for immediate release. This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Fpedpexx Afkofx Akyjn Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei Fodpfxerr Ehqe Akyepn type: SR500/310 spare part number: 5 Dition: gebraucht

Condition: used, mileage: 249,434 km, power: 368 kW (500.34 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, * Sun visor * Power steering * EDC * ABS * Radio * On-board computer * Cruise control * Air horns * Digital tachograph * Electric windows * Electrically adjustable mirrors * Mirror heating * Rear window * Driver's air-suspended seat * Longitudinal and transverse differential locks * Air intake above * Exhaust behind the cab Fjdpfx Asz Htqqekyjpn * Roof spoiler * ASR * Hill start assist * AP axles * 12-speed * Suspension: leaf spring and air suspension * Payload: 15939 * Continuous brake: retarder Sales only to businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: used, mileage: 193,977 km, power: 368 kW (500.34 HP), first registration: 04/2025, fuel type: diesel, empty load weight: 8,218 kg, maximum load weight: 11,882 kg, overall weight: 20,100 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2025, number of seats: 2, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Red, Unladen weight: 8218 kg, Gross vehicle weight: 20100 kg, Front axle: 385/55 R22.5, Rear axle: 315/70 R22.5, Seats: Leather, Air suspension, Retarder, Digital tachograph, Trailer coupling: JSK 42KZ, -560 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary air conditioning, Adaptive Cruise Control ACC, Auxiliary heater with automatic pre-selection, Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Alloy wheels, Electric windows 2x, Roof spoiler, Fog lights, Electric and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Tire pressure monitoring, Central locking with remote control, Sun visor, Refrigerator, Axle load indicator, Hill Hold Control HHC, LED daytime running lights, Connection plug 1x15 pin, Ferry function, Telematic system, Seat air conditioning, Side skirts, Cab suspension, Microwave, Coffee machine, Smart tachograph 2, Vecto 3. Fpjdpfx Akez N Ittsyon

Year of construction: 2025, condition: like new (used), functionality: fully functional, Stainless Steel Mixing Tank Fpodpfxjyhnn Rj Akyon 500l speed 23 rpm date of production 2024.12 used 3-4 times only

Condition: used, functionality: fully functional, mileage: 252,750 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 12 mm Rear left outer - 4 mm Rear right inner - 12 mm Rear right outer - 12 mm Fedpfx Akjz D Ufwoyepn

Condition: used, functionality: fully functional, mileage: 227,238 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Volvo Extended Front cab: PART OF AERO CAB Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Fpjdpfx Ajz E Hffekyen Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 10 mm Front right - 10 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 179,395 km, power: 368 kW (500.34 HP), first registration: 01/2025, fuel type: diesel, overall weight: 8,178 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control with lower operating settings - Map based topography information. Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. AEBS advanced emergency brake system Rear Camera - GSR Compliant fitted at end of frame Fodpsz Hm Hrsfx Akyspn Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre Parking heater 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Load 7.1 tonnes Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK AdBlue tank - 99 litre under/behind cab Technology Secondary colour information display Fleet Management System gateway - required for telematics and Dynafleet dealer fit Exterior Daytime driving lights LED, V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 10 mm Front right - 10 mm Rear left inner - 10 mm Rear left outer - 10 mm Rear right inner - 10 mm Rear right outer - 10 mm

Condition: used, mileage: 312,790 km, power: 125 kW (169.95 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 4,275 kg, maximum load weight: 2,725 kg, overall weight: 7,000 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 21 m³, loading space length: 4,820 mm, loading space width: 2,150 mm, loading space height: 2,090 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Iveco Daily 70C17 E6 with refrigeration - Refrigerated box body - Refrigeration unit: Carrier Pulsor 500 - Power outlet - Partition - Manual transmission - Active cruise control - Lane keeping assist - ABS/ASR/ESP - 3 seats - EURO 6 - Air conditioning - Dual tires Fjdpfxez N E Eme Akyjpn - Tires: 225/75 R16 In very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: good (used), Year of construction: 1986, Grinding depth: 500 mm Internal diameter: 20...400 mm Fpjdpfx Asz Izgiokyjn Workpiece spindle speed: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Total power consumption: 17 kW Machine weight approx.: 6.5 t Additional information: grindable diameter within the workpiece guard: internal: 20..400 mm; external: 500 mm max. workpiece diameter within the workpiece guard: 500 mm max. grinding depth: 315 mm grindable taper angle: 60° Internal grinding spindle speeds: 2640...16500 rpm Drive power for surface grinding unit: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40...400 rpm Table speed: 0.1...8 m/min Rapid traverse: 10 m/min Table travel: 630 mm max. distance from the workpiece spindle flange to the grinding spindle support: 1250 mm

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Fpjdpfx Akez Iz Hpjyen Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, mileage: 419,626 km, power: 368 kW (500.34 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 16,680 kg, maximum load weight: 23,320 kg, overall weight: 40,000 kg, axle configuration: 10x4, wheelbase: 5,000 mm, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, total length: 9,000 mm, total width: 2,550 mm, total height: 3,100 mm, number of cylinders: 6, displacement volume: 12,777 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, EBS, USB port, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, retarder, seat heater, Key Features Internal Reference: 26230M Chassis Number: YV2 XT4 0G8 GB7 724 40 Serial Number: 313.676.419 Fpjdez Hrh Ijpfx Akyon Vehicle Model: FMX-500 10x4R Trösch / Swiss-Vehicle Vehicle Brand: Volvo Trucks Product Category: Tipper Truck Condition: Used Mileage: 419626 Emission Standard: Euro 6 Date of First Registration: 08.11.2016 Last Inspection (MFK or TÜV): 02.07.2025 Fuel Type: Diesel Engine Displacement (cc): 12777 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Suspension: Steel-Steel Hydraulic System: Tipping Hydraulics Retarder / Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, EBS, Electric Windows, Electric Mirrors, ESP, Radio, Heated Seats, Cruise Control, USB Interface, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 10x4 VLA Axle 1: 315 / 80 R 22.5/6mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/9mm, Disc Brakes, Leaf Suspension Axle 3: 315 / 80 R 22.5/13mm, Disc Brakes, Air Suspension Axle 4: 315 / 80 R 22.5/11mm, Disc Brakes, Leaf Suspension Axle 5: 315 / 80 R 22.5/11mm, Disc Brakes, Leaf Suspension Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight: 40000 Payload: 23320 Unladen Weight: 16680 Vehicle Wheelbase: 5000 Vehicle Height: 3100 Vehicle Length: 9000 Vehicle Width: 2550 Body Body Manufacturer: TRÖSCH Body Model: Rear Tipper Body Internal Dimensions (L x W x H): 5840/2400/1200 Body Year of Manufacture: 2016 Body Equipment: Cabin Control, Auxiliary Drive

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 500 kg, Vetter 500kg crane, with a reach of 2.5m from the pivot point. Lifting height under the bridge crane is 3.4m. Intermediate plate included. Sold without warranty or guarantee. Fpedpsz Ix U Rofx Akyjn

Condition: used, functionality: fully functional, Year of construction: 2011, Equipment: documentation/manual, Abus crane, 500 kg capacity. Lifting height under the hook: 3877 mm, reach: 5 m. Includes a Demag winch, manufactured in 2019. Sold without warranty or guarantee. Fsdpfsz Ix T Hjx Akyepn

Condition: used, mileage: 449,420 km, power: 368 kW (500.34 HP), first registration: 11/2008, fuel type: diesel, tire size: 13 R22.5, axle configuration: 6x4, wheelbase: 4,050 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, emission class: euro4, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2008, Equipment: central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Aluminum fuel tank - Sun visor - Toolbox = Further Information = Fpedpfxoz I At Dj Akyjn Axle configuration Tire size: 13 R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable; Tire tread depth left: 3 mm; Tire tread depth right: 8 mm Rear axle 1: Dual tires; Tire tread depth left (inside): 8 mm; Tire tread depth left (outside): 8 mm; Tire tread depth right (inside): 8 mm; Tire tread depth right (outside): 8 mm; Reduction: External planetary axles Rear axle 2: Dual tires; Tire tread depth left (inside): 10 mm; Tire tread depth left (outside): 10 mm; Tire tread depth right (inside): 10 mm; Tire tread depth right (outside): 10 mm; Reduction: External planetary axles Weights Unladen weight: 12,780 kg Payload: 13,220 kg GVW: 26,000 kg Condition Damage: None

Condition: used, mileage: 411,315 km, power: 368 kW (500.34 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 13,700 kg, maximum load weight: 26,300 kg, overall weight: 40,000 kg, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,000 mm, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 18.44 m³, loading space length: 5,630 mm, loading space width: 2,340 mm, loading space height: 1,400 mm, number of cylinders: 6, displacement volume: 12,777 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, EBS, USB port, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, parking heater, power mirror, retarder, seat heater, trailer coupling, Key Features Internal Reference: 26155M Chassis Number: YV2 RT4 0G2 FB7 177 78 Serial Number: 313.529.381 Vehicle Model: FH-500 10x4 Tipper + Thermo / Swiss-Vehicle Vehicle Make: Volvo Trucks Product Category: Tipper Truck Condition: Used Mileage: 411315 Emission Standard: Euro 6 Date of First Registration: 23.04.2015 Last Inspection Date: 25.06.2025 Fuel Type: Diesel Engine Displacement (ccm): 12777 Engine Power: 500 Transmission Type: Fully Automatic Number of Cylinders: 6 Suspension: Steel-Air Retarder / Intarder: Yes Cab Vehicle Equipment: ABS, Trailer Coupling, Bluetooth, CD Player, EBS, Electric Windows, Electric Mirrors, ESP, Navigation System, Emergency Stop Assist, Radio, Seat Heating, Auxiliary Heater, Cruise Control, USB Interface, Central Locking Cab Size: Sleeper Cab Fpsdpfx Akoz Hq H Nsyjn Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 10x4 Axle 1: 385/65 R 22.5/9mm, Disc Brakes, Leaf Suspension Axle 2: 385/65 R 22.5/7mm, Disc Brakes, Leaf Suspension Axle 3: 385/65 R 22.5/12mm, Disc Brakes, Air Suspension Axle 4: 315/80 R 22.5/13mm, Disc Brakes, Leaf Suspension Axle 5: 315/80 R 22.5/8mm, Disc Brakes, Leaf Suspension Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight (GVW): 40000 Gross Train Weight: 40000 Payload: 26300 Unladen Weight: 13700 Vehicle Wheelbase: 5100 Vehicle Height: 3500 Vehicle Length: 9000 Vehicle Width: 2550 Body Body Manufacturer: LANZ+MARTI Body Model: SWS Tipper + Thermo Silo Body Internal Dimensions (l x w x h): 5630/2340/1400 Body Year of Manufacture: 2015 Body Equipment: Cab Control, Auxiliary Drive Body Note: Manufacturer: LANZ+MARTI, Model: SWS Tipper + Thermo Silo, Year: 2015, Cab Control, Auxiliary Drive

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 -Drilling depth 750 / Extension ~1000 Fodpfx Ajd Ri H Eskyjpn -Tank -Pumps -Loading device -Tailstock

Year of construction: 2003, condition: used, functionality: fully functional, input voltage: 400 V, input current: 85 A, continuous power: 45 kW (61.18 HP), Plastic granulator ESMOS type Balkán, version M 500/800, manufacturer ESMOS, Bulgaria. For size reduction of plastic waste, particle size depending on screen. Technical data (per manufacturer's documentation): – Feed opening: 800 × 500 mm – Knives: 6 rotor knives, 4 stator knives – Drive: electric motor 45 kW, 1475 rpm, V-belts – Power supply: 3 × 400 V / 50 Hz, rated current 85 A, 63 A plug – Throughput: approx. 400–800 kg/h depending on material and screen – Extraction outlet Ø 146 mm, protection IP 54 – Weight: 2,750 kg Fsdpez I Izgefx Akyjpn Manufacturer's technical documentation available (see PDF). Condition: in working order. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Year of construction: 2021, condition: new, Several high-quality Hilti diamond core drills/core drilling bits in various diameters are for sale. Available diameters: * 2 × Ø 202 mm Fedpsz I Rmlefx Akyopn * 1 × Ø 250 mm * 1 × Ø 300 mm * 1 × Ø 350 mm * 1 × Ø 400 mm * 1 × Ø 450 mm * 1 × Ø 500 mm Technical specifications: Manufacturer: Hilti Type: Diamond core drills for concrete Drilling method: Wet drilling Drilling mode: Stand-mounted Working length: 450 mm Interface/Mounting: BU (Hilti) Segments: Laser-welded Product class: Premium Suitable for or usable with Hilti core drilling systems, depending on the diameter/design: * Hilti DD 200 * Hilti DD 250-CA * Hilti DD 350-CA These core drills come from our inventory and are being sold due to non-use. The original new prices range from several hundred to over €2,000 per core drill, depending on the diameter. Individual sale as well as sale as a complete package is possible. A corresponding price agreement is possible when purchasing multiple core drills. Inspection and collection are possible by arrangement. Also included in the offer: Hilti DD-BS-ET 500 core drill extension * Extension for Hilti diamond core drills/core drilling systems * Length: 500 mm * Original Hilti accessory * For extending the possible drilling depth * Sold together with the offered Hilti core drills The core drills and the DD-BS-ET 500 extension are being sold due to non-use. All information is provided to the best of our knowledge. Technical data and compatibility should be checked before use based on the respective Hilti system.

Condition: good (used), Vibratory spiral conveyor – feeding system with hopper and linear conveyor SIM SF 500 SIM BB-20 SIM SF 500 vibratory spiral conveyor with SIM BB-20 belt hopper and AKB DTB-UU-750/20 linear conveyor Manufacturer: SIM Type: SF 500 Vibratory spiral conveyor Diameter: 500 mm Height: 238 mm Spring angle: 18° Weight: 150 kg Direction of rotation: Right-hand rotation → clockwise Fpedpsvi Hkijfx Akyjn Spiral conveyor attachment made of high-alloy steel/stainless steel (X5CrNi18.10) Current A, 230V: 8 A Control unit / frequency inverter: RGF - 2 Input voltage: 230 V Output voltage: 0-200 V SIM BB-20 belt hopper, 20 liters Filling volume: 20 liters Max. filling weight: 35 kg Discharge width: 80 mm Belt speeds: 0.1 - 0.6 m/min Hopper basin, discharge chute: stainless steel Drives: AC geared motor 230V / 50Hz Control unit / frequency inverter: RGF - 2 Input voltage: 230 V Output voltage: 0-200 V AKB DTB-UU-750/20 Linear conveyor Delivery without enclosure Further items – new and used – can be found in our shop! International shipping costs on request!