Used Hidrobrasil Small Series Press for sale (18,389)

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Pgodpfx Ajywpt Iod Sjn Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: new, Year of construction: 2017, Exhibition machine Year of manufacture: 2017 (has not yet been used in production) The Compact Star is a pneumatic gluing press with 5 gluing levels. The rotary motion is provided by a pneumatic drive with safety interlocking. Each level has 4 adjustable vertical clamps with an adjustable counter bearing. Each vertical clamp is equipped with a hold-down rail. Furthermore, each level has 2 adjustable horizontal pressure bars with counter bearings. Maximum clamping dimensions: Vertical: 960 mm Horizontal: 1335 mm Material thickness: 50 mm Podpfskwg Szsx Ad Sjgn Dimensions: Length: 2700 mm Width: 3117 mm Height: 3096 mm Availability: short notice Location: Röllbach

Condition: used, Heidelberg GTO 52 Pedpfxszgkb As Ad Ssgn Year of manufacture: 1983, total print count: 13.4 million, conventional dampening system (blanket), Plus version including numbering unit Inline coating system KVE 52 (for full and partial coating) UV drying system ADNOS 1UV46 (for curing UV inks and coatings)

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Technical data: Manufacturer: ATOM Pgjdpfx Ajzgg Sqed Ssn Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Specifications: X/Y axis working area: 3000 x 1500 mm Z axis working area: 115 mm Control system: SINUMERIK 840D sl USB port: yes Dimensions: Length: 11400 mm Width: 7000 mm Height: 3200 mm Control, hardware, electrical equipment Control system: Siemens 840D SL User interface: Windows 10 IoT Screen: Multi-touch monitor Screen size: 19" Interface: USB Axis data - Max. speed Speed: 235 m/min Pgedpfx Ajzgf Tgjd Ssn Working area X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 116 mm Max. workpiece weight, pallet changer: 1100 kg Max. workpiece weight, both pallets: 2200 kg Laser-specific data - TruDisk 8001 Max. laser power: 8000 W Max. sheet thickness, structural steel: 25 mm Max. sheet thickness, stainless steel: 40 mm Max. sheet thickness, aluminum: 25 mm Max. sheet thickness, copper: 16 mm Max. sheet thickness, brass: 10 mm Configuration: ⦁ Working area: 3000 x 1500 mm ⦁ Enclosed machine frame ⦁ Machine cooling unit (water-air) ⦁ Automatic pallet changer in longitudinal direction ⦁ High-speed cutting package ⦁ Water-air cooling unit ⦁ Laser extraction ⦁ Smart Beam Control (intelligent beam monitoring) ⦁ Performance package for fusion cutting ⦁ Installation: Left-hand side ⦁ Cleaning brush ⦁ Integrated camera ⦁ Smart Collision Prevention ⦁ Automatic nozzle cleaning ⦁ Electric roll-up cover ⦁ Nozzle changer ⦁ Wireless operation point ⦁ Copper cutting package ⦁ Brass cutting package ⦁ Performance package for fusion cutting ⦁ Coolline ⦁ Brightline ⦁ Teleservice Automation: ⦁ Loadmaster (Liftmaster also available as an option)

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Podpfx Adjrivu Ss Segn Pressing force: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connection power: 400 V / 95 kVA 23626

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Pgsdoy S Rqwopfx Ad Ssn Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Pedpey R Nnfjfx Ad Segn Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Pgedpfxszgfv Us Ad Sjn Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Pjdozgdc Hspfx Ad Segn Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: ready for operation (used), Year of construction: 2022, total width: 3,500 mm, product length (max.): 5,000 mm, number of axes: 6, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • Robot controller and Teach Panel • Bumper (remote protection) and protective foil for TeachPanel • Multifunction flange for magnetic attachment to torch neck • Balancer system for hose attachment • weldControl URCap software • TOUCHSENSE CAP - component search using welding wire or gas nozzle • CAP component OFFSET - for moving and copying programs • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers (safety SPS for 2-station operation) Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: holdONE = torch holder incl. integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Pjdpfxex D E Huo Ad Ssgn Extra Information The equipment is in like-new condition because the project for this purchase never materialized.

Condition: excellent (used), functionality: fully functional, SIPA veneer press with shelf, 2500×1200 Shelf length: 2500mm Podozganxepfx Ad Segn Shelf width: 1200mm Press with 4 hydraulic cylinders Shelves heated with water from the boiler

Condition: new, Partially unpacked for photography – unused item from a warehouse clearance. Camera lens, Edmund HP Series LEC-86571 (Fixed focal length – 16mm) Pgjdpjzgawtofx Ad Sen Image circle: up to 2/3" sensor format High-quality industrial lens for image processing, machine vision, and automation applications.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: M32961, year of last overhaul: 2025, Self-pressing container (Absetzer), year of manufacture: 2015 Unladen weight: 2,500 kg SN: 31047, Colour: Blue Last service: 05/2025, last UVV: 05/2025 It was in active use until January 2026. The press was extensively tested today (27/04) and is ready for immediate use. Podpeyymraofx Ad Sjgn The press has a superstructure in which weighing technology was installed. This has been removed. Material is fed into the press via the side door. The enclosure can be removed at any time by loosening the screws. Then the press is in its normal state. Location: DE - 58730 Fröndenberg

Condition: new, Year of construction: 2026, control type: CNC control, KBA - Combined CNC-controlled press brake / guillotine shear Super-compact machine with a very small footprint. Maximum cutting length: 3,020 mm or 2,020 mm Podpfxszhklke Ad Ssgn Rated cutting capacity: 6 mm steel sheet / ST 40 Cutting angle: 1°30″ Backgauge for the shear station – adjustment range: 750 mm Table height: 750 mm Maximum bending length between side frames: 3,550 mm or 2,505 mm Maximum pressing force: 1,000 kN Working height for bending: only 1,230 mm Stroke range (bending station): 175 mm Maximum installation height (bending station): 350 mm Backgauge adjustment range (bending station): 750 mm Dimensions including operator’s pendant: 4.25 or 3.25 m x 1.82 m x H 2.8 m Required floor space: 3.85 or 2.85 x 1.82 m Drive power: 10 kW Weight: 9,000 kg or 7,500 kg Equipment: - CNC control with touchscreen and 10” colour display, graphical user interface, and automatic bending angle calculation - 1 set of press brake tools (bending punch + four-way reversible die) - Sheet metal supports for the press brake station - 90° angle stop for the guillotine shear with 1 m length - Bending station working area safeguarding via light barriers, rear area safeguarded by lateral safety guards and light barriers Optional: - Front bending area guarding by PILZ® camera monitoring - Rotatable angle stop

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 650 t, stroke length: 400 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 90,000 kg, working height: 1,600 mm, Equipment: safety light barrier, Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Pgedsv Hpnljpfx Ad Ssn Becker & van Hüllen_ 35.11284 3-phase press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press Pgodpjv Hp T Uofx Ad Sen A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Pgsdpfxjv E Rm Hj Ad Son Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, Year of construction: 2026, Three-axis CNC-controlled hydraulic press brake with servo drives + manual crowning system Axis - Y - (press beam up and down) Axis - X - (back gauge - forward and backward) Axis - R - (back gauge rail - up and down) Maximum pressing force 3000 kN (= bending 16 mm steel sheet S235jr over the entire bending length in a V-die with a width of 140 mm = inside radius 16 mm) Pedpfx Adszhi Uds Sjgn Maximum bending length 2,500 mm Distance between side columns 1,700 mm Overhang in the side columns 400 mm Press beam stroke 300 mm Maximum possible installation height 520 mm Press beam travel speeds downwards 80 / 10 mm/sec - upwards 70 mm/sec Table width 400 mm Adjustment range of the back gauge forward and backward 550 mm – up and down 200 mm, oil tank capacity 250 liters Dimensions approximately 3.3 x 2.3 m x height 3.1 m Drive power hydraulic motor 22 kW Weight approximately 16,000 kg We also supply other model sizes.

Condition: new, Year of construction: 2026, CNC-controlled frame gluing press for gluing all types of frame constructions with dowel joints, mortise and tenon joints, and 45° miter joints. Manual centering of the left press plates, hydraulic centering of the right press plates, and hydraulic movement of the upper press beam. Maximum pressing area: 3,000 x 2,000 mm Pgjdszhi Nbjpfx Ad Sjn Two vertical press cylinders – pressing force per cylinder: 7.4 tons Two horizontal press cylinders, stroke: 150 mm – pressing force per cylinder: 2 tons. Maximum profile depth: 130 mm. Positioning of the two right horizontal press plates by hydraulic cylinders. Positioning of the upper press beam by hydraulic cylinders. Technical data: Weight: 1,300 kg Drive power: 1.5 kW Dimensions: 3.8 x 1.2 x H 2.4 m - Control of the hydraulic movements digitally via the touch screen using softkey buttons - Programmable pressing programs – for pressing pressure and pressing time, automatic program-controlled opening of the press cylinders. Operator safety: Automatic locking of the upper press beam in the event of sudden pressure loss or when the machine is switched off.

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, Fortuna A 3 H + Roll Divider Dough dividing and rounding machine Roll divider, top model Fortuna Automat, size 3+ with rounding function robust technology Head cleaning to the rear, electrically operated Dividing head with stainless steel blade Dough capacity up to 2400 g, depending on the dough type Pgedpfx Adsxvk Rij Sen Connection: 400 V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Platform or mobile base Rounding plate Service package Maintenance contract Spare parts box for added security Delivery service Training and commissioning More top dough dividers in stock!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Record Roll Press Semi-Automatic for consistent quality! Dividing head NEWLY redesigned Stainless steel knives NEW simple, robust engineering! with 3 forming plates only from us: DGUV V3 tested Connection: 400V, 16A-CEE plug Pgjdpfx Adey Ebkbo Sen Dimensions: 520 x 500 x 1200 mm (WxDxH) Refurbished used machine, SAB inspected with warranty & spare parts service Visit our large showroom!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 08/2028, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, input frequency: 50 Hz, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 16 A, Semi-automatic dough divider and rounder, bun press Model: Divobun 3-40 NEW proven technology ... already tested extensively! Podpjrkzf Sjfx Ad Ssgn Stainless steel blades with easy-to-clean setting! Dough portioning from 40 to 120 grams/piece simple technology! Machine is mobile only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine, SAB tested 2-year warranty + spare parts service Options: Leasing & rental service Maintenance contract Stainless steel machine platform Rounding plate Spare parts box Delivery service Instruction / commissioning Many more bun presses in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 08/2028, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, input frequency: 50 Hz, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 16 A, NEW NEW Bread Roll Press NEW NEW Semi-automatic dough divider and rounder, Pgsdpferkzghsx Ad Sjn TOP model: Divobun 3-30 NEW proven technology… already tested extensively! Stainless steel blades with easy-to-clean setting! Dough piece weight: 25 to 80 grams only available from us, DGUV V3 certified Connection: 400V, 16A CEE plug New machine & SAB certified 2 years warranty + spare parts service Optional: Delivery service Leasing & rental service additional forming plates maintenance contract service package training & commissioning Other top-quality dough dividers in stock!

Condition: used, Year of construction: 1963, Single-column hydraulic press MÜLLER ZE 250/300-12.5 1.3-U, No. 586, year of manufacture 1963, pressing force 250 t, working area 1,300 x 1,100 x 1,000 mm, retrofitted with ROMA safety roller door (year of manufacture 2012) Pedpfx Aeyhqqnjd Ssgn