Used Hbs Mpw 2010 for sale (1,544)

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Fgodpfoyltr Aox Albsg Top condition

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm Fedpjzy Sqfofx Albjgg PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,941 h, load capacity: 5,000 kg, lifting height: 5,170 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,530 mm, Equipment: cabin, lighting, retractable fork, sideshift, Forklift Jungheinrich DFG 550, year 2010, 3,941 operating hours, diesel, serial no. FN410363, fork positioner, side shift, telescopic forks, load capacity 5,000 kg, StVZO lighting, Blue-Dot rear, triplex mast, lift height 5,170 mm, overall height 2,530 mm, free lift 1,500 mm, fork length 1,200 mm – 2,250 mm Fgsdjyngp Hopfx Albjg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 131703-100, clamping force: 1,500 kN, screw diameter: 50 mm, displacement volume: 393 cm³, injection pressure: 1,866 bar, injection weight: 358 g, mold height (min.): 250 mm, ejector stroke: 160 mm, opening stroke: 600 mm, plate length: 740 mm, plate width: 740 mm, total length: 5,100 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,100 kg, heating capacity: 13.9 kW (18.90 HP), pressure: 210 bar, pump power: 22,000 W, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 88 A, Type: Hydraulic Injection Molding Machine Model: HM 150/525 Max. Motor Rated Current(Largest MTR FLA): 40 A Control Voltage: 24 V DC Rated Voltage: 400 V (3-phase) Rated current: 88 A Max. fuse rating: 100 A Frequency: 50 Hz Short-circuit rating(SCCR): 6 kA Year of construction: 2010 Weight: 6100kg Fedpfsyw Uchex Albogg Control system: Intergrated Battenfeld control with touch-screen panel Manufacturer: Wittmann Battenfeld

Condition: excellent (used), Year of construction: 2010, Machine type: - Deckel Maho DMC 1035 V ecoline - Year of manufacture: 2010 - Travel ranges: X: 1035mm, Y: 560mm, Z: 510mm Control system: - Siemens 810D / ShopMill control system - Electronic handwheel Spindle: - Tool holder: SK40 - Speed range: max. 10,000 rpm Tool magazine: - Tool changer with 20 magazine positions Table: - Fixed angular table - Clamping surface: 1200 x 560mm Operating hours: - Machine: 33,847 - Spindle: 11,026 Optional extras: - Chip conveyor - Coolant system: 20 bar Fgedpezy Ab Usfx Albog - Coolant nozzle for chip flushing Delivery time: - Immediately or by arrangement

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Industrial WEIMA extraction and briquetting setup removed from a working environment. Used from new by the same company and regularly serviced/maintained. Includes: WEIMA TH 520 extraction/filter unit WEIMA WL8 shredder Briquette press Blower system Control cabinet Associated ducting/pipework Model: TH 520 Year: 06/2010 400V 3 Phase 7.5kW 50Hz Weight: approx 1.2 tonne Joinery workshops Furniture manufacturing MDF/wood waste processing Recycling operations Biomass fuel production Fgedpfxozgclas Albog System is currently operational and can be demonstrated working. Buyer responsible for removal/transport. Located: South Wales Message for more details, viewing or video walkthrough. Open to offers

Condition: used, Year of construction: 2010, machine/vehicle number: 48/1-006 15500889, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, cutting height (max.): 85 mm, cutting width (max.): 4,400 mm, saw blade diameter: 350 mm, overall weight: 5,000 kg, Equipment: scorer, - Holz Her CUT 6120 - heavy-duty precision high-performance panel saw - year of manufacture: 2010 - cutting length: 4400 mm - saw blade projection: 82 mm - control system: CUTCONTROL 2 - label printer - air cushion tables - main saw unit: 11 kW, saw blade diameter 350 mm - scoring unit: 2.2 kW - saw carriage feed: 0 - 100 m/min, stepless - machine dimensions approx. 9730 x 6450 x 1650 mm - machine has been professionally dismantled and securely stored Fsdpjy D Hb Nsfx Albsgg - trouble-free loading with forklift (included in the price) - location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus)

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Fodezv Ul Rjpfx Albogg Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: used, Year of construction: 2009, operating hours: 19,648 h, machine/vehicle number: LC666, Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-style carton formats.Advanced Automation & Control SystemsThe line is composed of dedicated processing and packing modules that support a sequential production workflow. The filling machine is specified at 100V, while the cardboard packer is specified at 400V. The accumulator provides a buffer between operations, helping to maintain material flow when downstream equipment requires short interruptions or adjustment time.The straw applicator performs a dedicated packaging operation after filling, supporting a practical carton presentation for end users. Electrical connection and control-system integration should be evaluated during installation to ensure correct synchronization between the individual modules.Production Line Integration CapabilitiesThis used bottling line is arranged as a carton filling and industrial packaging system for the 250 Prisma format. The equipment sequence supports filling, straw application, product accumulation and cardboard packing. The included paper trolley is intended for handling paper reels associated with carton production operations.Machine typeModelYearFilling MachineA3 CF2009Various Equipment - Accumulation SystemACHX302010Various Equipment - Straw ApplicatorSA302012Case PackerCBP322010Various Equipment - Paper Reel TrolleyThe modular layout allows the line to be assessed for integration with upstream product p... Fgjdpfxjzvl Uis Albjg

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Turning Speeds: 5500 RPM Fgsdezx Nxkopfx Albjg Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Fgsdpfszlktpex Albsg Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Year of construction: 2010, USED HERMLE C 40 UP MACHINING CENTER Year of manufacture: 2010 Control: HEIDENHAIN iTNC 530 Travel: X 850 mm, Y 700 mm, Z 500 mm Linear axes (X-Y-Z) – Dynamic version Spindle speed: 18,000 rpm Spindle taper: HSK - A63 Tool magazine with 38 positions NC rotary table with tilting function, dia. 800 mm for PALLET CHANGING C-axis with torque motor, A-axis with tandem drive includes pallet clamping system, hydraulic and pneumatic expansion, table washing system, cabin door with automatic opening/closing (Capacity 1,400 Kg) Pallet changing device PW 800 for SRT 800 PW - 630 x 630 Capacity: 800 Kg Rotary loading/unloading station for PW 800 Additional control for operating the clamping system for PW 800 Internal coolant supply at 80 bar, including: Paper filter, Standard coolant system, Pressurization of optical scales, table washing system Chip conveyor Air blow cleaning device Fgsdpfx Alszy Rqdebog Cabin cover with manual opening/closing Polycarbonate safety glass HEIDENHAIN thermal compensation Electronic handwheel Renishaw measuring probe incl. preparation Laser system - Blum Chip washing gun Signal lamp No. 2 pallets 630x630 Additional articulated arm

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 Fgedezr N Hujpfx Albjg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 5,400 h, mileage: 87,000 km, load capacity: 230 kg, lifting height: 20,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORMS SOCAGE DA 320 Year 2010 Working height 20 m Fedpozqzwijfx Albjgg Horizontal outreach 9 m Basket capacity 230 kg Hours 5.400 km 87.000 Complete of all documents

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 - Condition: good, used - Control: Siemens 810D Fgjdpfx Aeyf Hymjlbeg - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,300 kg, fuel type: electric, – Made in Germany – Year of manufacture: 2010 – Shredder equipped with a magnet for collecting metal parts TECHNICAL SPECIFICATIONS: – Feed opening dimensions: 600 x 800 mm – Feed opening volume: 0.6 m³ – Main engine: 18.5 kW – Rotor diameter: 252 mm – Rotor speed: 90 rpm – Number of knives: 15 pcs – Knife dimensions: 40 x 40 mm – Screen size: 16 and 20 mm – Auto-reverse function – Hydraulic drawer: 160 mm – Chute for discharging wood chips, length: 2600 mm – Chute outlet height: 1450 mm – Chute diameter: 150 mm Fgodpfxsy S Tg Ij Albog – Chute motor power: 0.75 kW – Weight: ~1300 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 Fgedpszwl U Sefx Albeg X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 5, This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • A axis: swivel -10° to 120°, max. Rotation speed 100 rpm • C axis: 360° rotation, max. Rotation speed 150 rpm • Automatic pick-up tool changer with 16 stations for hsk-e 32 clamps Fgsdpjzx Rpdjfx Albjg • Spindle attachments: hsk-e 32 • External coolant tank: 80 l with 2 bar pump • Infrared workpiece measurement: dmg powerprobe 400 • Ethernet interface preparation • Laser tool measurement with renishaw nc-4 iii • 3d quickset tool kit • Automatic feed system: ph 2|4 basic system Extra Information Control: Siemens 840D solutionline Table Diameter: 190 mm Integrated Quick Clamping System: EROWA ITS 100 Coolant Treatment and Oil Mist Extraction Systems Installed Electronic Handwheel and Machine Data Management DMG Powertools Pre-installed

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 100152, overall weight: 548 kg, input voltage: 400 V, type of input current: three-phase, power: 7 kW (9.52 HP), input frequency: 50 Hz, Manufacturer: VEMAG Maschinenbau GmbH Model: FSL 210 Linker + HP10L Year of manufacture: 2020 Fgsdpozi S Iiefx Albog Serial No.: 100152 Condition: Very good, fully operational Ready-to-run filling-and-linking production line, both machines from Vemag (Germany), sold as one package. Complete head-to-tail solution for sausages. The VEMAG FSL 210 is a high-performance automatic sausage linking and twisting unit designed for precise portioning of fresh sausages in natural, collagen and cellulose casings. The machine provides accurate link lengths, high production capacity and consistent product quality. It is equipped with a separating device and is intended for operation together with a VEMAG vacuum filling machine featuring the CAN-BUS control system. Complete Vemag sausage production line offered as a bundle sale. Both machines from the same manufacturer, designed to work seamlessly together, single supplier for service and spare parts. Ideal for immediate production start-up without compatibility risks. Technical specifications FSL * Capacity: up to 800 portions/min (depending on product, casing and portion size) * Portion length: * from 55 mm (single-link separation) * from 40 mm (multiple-link separation) * Casing calibers: 13–40+ mm * Suitable for natural, collagen and cellulose casings * Integrated sausage separating device * Fast Start function for quick casing changes * Power supply: 400 V, 3-phase, 50/60 Hz * Installed power: 7 kW * Weight: 548 kg * Manufactured in Germany Features * Precise twisting and portioning * High-speed production with consistent link length * Hygienic stainless-steel construction * Easy cleaning and maintenance * Mobile frame with heavy-duty castors * Ideal for industrial fresh sausage production The machine has been professionally maintained and is in very good working condition. Vemag HP10L Vacuum Filler Model: HP10L Serial No: 1730016 Year of manufacture: 2010 Manufacturer: Vemag Maschinenbau GmbH, Verden (Aller), Germany Voltage: 3~ 400-460V, 50/60Hz Nominal current: 15A Power: ~10 kW SCCR: 5 kA rms CE compliant Important note on the HP10L touchscreen: The integrated touchscreen has a display issue but the machine remains fully functional for production. It can be controlled via any standard PC with a mouse — a documented and reliable workaround. Replacement of the touchscreen module is available through Vemag service.

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Fodsxvp Nkjpfx Albjgg Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Fjdpfxoy Eviro Albogg Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: repair required (used), Year of construction: 2006, functionality: limited functionality, type of input current: three-phase, SMB strapping tandem, year 2006, with parcel turner from 2010, three-phase power supply, operates with strapping band mm. Maintenance required: replacement of belts and conveyor bands on the strapping machines and belts on the parcel turner (the rollers show significant wear). There is a part to repair or replace on the compressed air cylinder (see photo). Fedpfxsyybbvj Albjgg

Condition: excellent (used), Year of construction: 2010, Band saw Manufacturer: HEMA Type: SR 600 Year of manufacture: 2010 Roller diameter: 600 mm Cutting height: 380 mm Fgjdpfxeztncko Albeg Cutting width: 580 mm Motor power: 2.2 kW Table: 600 x 540 mm Motor brake: Yes Cutting speed: 1,350 m/min Saw blade width: 6 - 25 mm Table tiltable: Yes, 45° Weight: 270 kg Dimensions: 2,085 x 1,035 x 820 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 1,659 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 2,300 mm, spindle speed (min.): 3,250 rpm, total width: 9,700 mm, total length: 7,400 mm, total height: 5,200 mm, position of the milling head: ORIZZONTALE E VERTICALE, spindle diameter: 150 mm, travel distance W-axis: 900 mm, table load: 30,000 kg, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, table length: 3,000 mm, table width: 2,000 mm, quill diameter: 150 mm, grinding spindle motor power: 53,000 W, torque: 25,000 Nm, spindle nose: ISO 50, number of slots in tool magazine: 120, Equipment: rotational speed infinitely variable, LAZZATI CNC BORING MACHINE, T-SHAPE, HB 150T CNC Heidenhain TNC 640 X-axis travel: 6,000 mm Y-axis travel: 2,600 mm Z-axis travel: 2,300 mm Fjdsznl Elspfx Albsgg W-axis travel: 900 mm Rapid traverse rate, X-axis: 12 m/min Rapid traverse rate, Z-axis: 15 m/min Rapid traverse rate, Y-axis: 15 m/min Rapid traverse rate, W-axis: 7.5 m/min Spindle diameter: 150 mm Spindle connection: ISO 50 BBIG plus DIN 7388 Spindle rotation speed: 3,250 rpm Spindle motor power: 53 kW in S1 – 65 kW in S6 Max. axial thrust during drilling: 25,000 N Automatic universal head, 1° x 1° D’Andrea UT5/500s head Rotary table dimensions: 2,000 x 3,000 mm Table load capacity: 30 tons Tool changer: 120 positions Width: 9,700 mm Height: 5,200 mm Depth: 7,400 mm Weight: 750 kg INCLUDES: - Chip conveyor - 3-position head changer - Coolant system with through-spindle coolant supply, bar 35, coolant tank capacity: 1,000 liters USED MACHINE YEAR 2015 – INSTALLED 2017

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Fgjdszw Dvnjpfx Albog