Used Hbm Hbm 250-M Vario for sale (74,029)

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Tsdozw Tzgepfx Amrec Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand 5 chain hoists available!!! With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Tsdpfx Aezv H Htomroc Item location is 75053 Gondelsheim See pictures.

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW Tjdpfx Ameyvvq Rsrjc weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. Tedpfx Amezghc Derjc X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Tjdjzaq Ecopfx Amrsc Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. Todpezaa Uaofx Amroc 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Todpfjy H D T Uex Amrec Technical Specification Taper Size SK 50

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding power: max. 300 A Tedpfx Aod I Szqomrsc -Welding cable with: electrode clamp -Ground cable -Number: 1x welding machines available -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU Tjdpoyrgu Rofx Amrjc o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1996, machine/vehicle number: MBMA2021, Technical data: 1 steel column slewing crane NL 250 KG Todpfx Ajqwn Ukjmrjc Available 3 times Payload at full radius 250KG payload Height: approx. 3.5m, UK boom: approx. 2.95m Projection: approx. 2.2 m, hook height: approx. 2.5 m Weight completely approx. 350KG with 250kg chain hoist with floor control Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Good condition, see pictures Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Tedpjrp D Uxsfx Amrec Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: excellent (used), Heavy duty wooden pallets with 3 skids Tedpfx Amjl Uvv Torsc accessible from 4 sides length 1680 mm width 1250 mm board thickness 45 mm weight 82,5 kg several available

Condition: used, For sale: a robust Dresser International M 10 A rough-terrain forklift from 1983. This powerful machine is equipped with a reliable International 6-cylinder diesel engine and has a recorded operating time of 4741 hours. With an impressive capacity of 10,000 lbs (approximately 4536 kg), this forklift is ideal for heavy-duty tasks on challenging terrain. The forklift features hydraulic fork adjustment and side shift for optimal flexibility and precision. The fork length is 1780 mm. The tire size is 20.5-25, and the machine is equipped with a cabin for comfortable operation. The overall dimensions are L: 9000 mm, W: 2550 mm, H: 3250 mm. Please note: the VIN number cannot be read. Tjdpfx Asz D Auysmrec

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 03/2027, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 to 4x4 all-wheel-drive special roll-off tipper with initial registration in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High-roof design Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axles Unladen weight 8,135 kg Payload 9,365 kg with a gross vehicle weight of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height 1.57 m Roll-off tipper control unit with cable extension Tsdpfxsz D N Uao Amrjc 2 additional frame tipper supports 2-stage control for extending and retracting Transfer case MAN G102 with on-road and off-road gears Transfer case lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, drawbar coupling Ringfeder Type RF40/G150B with air pressure connections Permissible gross train weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer 16,000 kg Front and rear axles leaf-sprung Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150 liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver comfort seat package Premium air-suspended, co-driver comfort seat package Plus Driver comfort seat air-suspended with lumbar support and shoulder adjustment Comfort center seat air-suspended with integrated seat belt system, offset to the rear Co-driver comfort seat air-suspended New vehicle with initial registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: excellent (used), functionality: fully functional, Shelf length: 2500 mm Shelf width: 1200 mm Clearance: 700 mm Tsdpfoz D T Evex Amrsc Cold press, no heating.

Condition: used, Year of construction: 2002, CNC machining center Deckel Maho DMF 250 linear, year of manufacture 2002, and DMC 63 H, year of manufacture 2002 Tedpfxjyphl Ee Amroc

Year of construction: 2024, condition: used, New: Yes Tjdpfxox S N Uno Amroc Power: 33 kW (45 HP)

Condition: used, Year of construction: 1995, functionality: fully functional, Hämmerle / HRC Dividing Straightening Machine 80.1250 | 1,250 mm | 19 Rolls | ARKU Overhaul 2020 For sale is our Hämmerle / HRC dividing straightening machine 80.1250, manufactured in 1995. According to the available documentation, the machine was overhauled by ARKU in 2020 and is suitable for straightening laser-cut, flame-cut, and stamped parts. Technical data according to machine documentation: Maximum material width: 1,250 mm Specified material thickness range: 0.8–20 mm 19 straightening rolls with 80 mm diameter Straightening speed: 2–20 m/min Infeed table with recessed ball rollers Driven discharge roller conveyor, approx. 2 m Year of manufacture: 1995 The actual material cross-section that can be straightened depends, among other things, on the material, material width, and part geometry. We would be happy to discuss your specific application using concrete parts as examples. Price: €140,000 net, negotiable, ex works Leopoldshöhe. The machine is available for immediate delivery. Inspection by appointment; dismantling, loading, and transport are not included in the price. We will provide documentation on the overhaul to interested parties, if available. Tsdpfxjz Eabyj Amrsc Please include information on the material, sheet thickness, and part size with your inquiry.

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Tsdpfx Asyz Stljmrsc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. Control Memory Funktion 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Todpfx Ajwugpbsmroc Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory fun...

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately Tsdpfow Uab Nex Amrsc • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Tedpfx Aeyz Dilomroc Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: new, Big gooseneck press brake punch H250/260/H280mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Tjdsiim Ayjpfx Amrjc L125/250mm

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Tjdpfx Aszi Em Somrec Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one.

Condition: excellent (used), I am offering for sale a professional Bohm Wiedenmann Super 300 sweeper-collector with a working width of 1.5 m. This machine is designed for collecting cut grass, leaves, branches, thatch after scarification, and other debris from green areas, sports fields, parks, golf courses, and large lawns. The Super 300 model is highly regarded for its robust construction and high performance. Technical data: * Manufacturer: Bohm Wiedenmann GmbH * Model: Super 300 1.5 * Year of manufacture: 1998 * Working width: 1.5 m * Permissible total weight: 1450 kg * Permissible axle load: 1250 kg * Permissible drawbar load: 200 kg * Maximum transport speed: 40 km/h * PTO shaft * Large collection container * Hydraulic control The machine shows normal signs of wear and tear consistent with its age. It is being sold in the exact condition as shown in the photos. Todjzmhz Tepfx Amroc