Used Hüller Hille Nbh 500 for sale (19,217)

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. Iisdpfxjzz H Sas Apcog all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine Iisdpjztpw Nofx Apcjg - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation. Iiedpfx Apsw T Sn Escsg

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Ijdpjzkmqzsfx Apcoig Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Ijdpfx Aswudhuspcsig Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 55226, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, total height: 1,900 mm, total width: 2,100 mm, total length: 1,700 mm, overall weight: 1,580 kg, For sale is a milling machine, brand Maho, model MH 500 C. The machine is in good condition. Year of manufacture: 1994 Milling spindle head swivels 2*90° Automatic tool clamping Control panel swivels Control system: Heidenhain 232 B X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 350 mm Clamping area: 800*360 mm Spindle taper: SK40 Quill stroke: 80 mm Spindle speed: 63-4000 rpm, stepless Feed rate: 0.1-2000 mm/min Dimensions: 1.7m x 1.8m x 1.9m Power consumption: 11 kW Weight: approx. 1.58 t Space requirement: 1.8m x 2.1m x 1.9m Upon request, transport and loading can be arranged throughout Europe for an additional charge. Iisdpfezl Dumjx Apceg Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine sales and purchases BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2015, Clamping force: 50 t Screw diameter: 35 mm Shot weight: 132 g Shot volume: 145 cm3 Injection pressure: 2.000 bar Type: Vertical Drive: Hydraulic Iiodpfx Apjzwfn Ejceg

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Iiodszq Ab Nspfx Apcog Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 04780000061, spindle motor power: 45 W, travel distance X-axis: 605 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,470 mm, overall weight: 22,000 kg, Gildemeister TWIN500 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Isdpfx Aezymviepcoig Counter spindle: 45 kW, 320 rpm Travel ranges: X-axis: 605 mm Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: HSK 63, 12000 rpm X-axis: 267 mm Z-axis: 1440 mm Tool magazine: 80 positions Machine Condition : Functional, good.

Condition: ready for operation (used), Year of construction: 1995, punching force: 22 t, total height: 2,300 mm, total width: 6,000 mm, sheet thickness (max.): 6 mm, overall weight: 11,050 kg, product length (max.): 6,900 mm, number of axes: 2, CNC punching machine manufactured in 1995. This TRUMPF Trumatic 500 features a maximum punching force of 220 kN, accommodating workpieces up to 150 kg. It offers a working range of 2500 mm along the X-axis and 1250 mm along the Y-axis, allowing for efficient processing of various sheet sizes. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 500 machine we have for sale. Contact us for further details regarding this machine. • Condition: In working condition; normal signs of use (scratches/dirt, especially near punch head); floor wear visible • Max sheet thickness (steel): 6 mm • Note: Current tooling set is suitable for up to 1.5 mm sheet thickness • Max punch diameter: 76.2 mm Iijdpfx Apjz Azurocog • Max workpiece weight: 150 kg • Working range: X = 2500 mm without repositioning (4 m sheets previously processed using repositioning/extension tables); Y = 1250 mm • Axis speeds: X up to 90 m/min; Y up to 60 m/min • Stroke rate (nibbling): up to 900 strokes/min • Table/Design: Flat perforated work table; mechanical punching head with hydraulic/pneumatic lines; long material support arm; control panel on cabinet with display, controls, and emergency stop • Utilities: 400 V / 50 Hz / 3-phase; connected load approx. 17 kVA; compressed air 6 bar Additional equipment • Large set of punches, dies, and tool holders (complete tooling set) • Large metal cabinet with shelving for tool storage • Metal scrap container on casters (under-table)

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Max. working height: 1100 mm Hole table: 360 x 500 mm Drilling depth max.: approx. 500 mm Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Iodpfxoi Nnute Apceig Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Condition: good (used), Speroni Magis - 500 tool pre-setting device SK40 basic fixture Z-axis 500mm Iisdpfx Aoz Ahb Eepceg In very good condition, fully functional. Sold complete with workbench and printer.

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C Ijdpfx Asu Au Duspcjig DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg Iodpfxexw N S Ie Apceig - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: DN1771/1789/1791, 1x Abus VS column-mounted slewing crane, capacity 500 KG There are 3 identical cranes available. Load capacity at full outreach: 500 KG / 0.5 tons Height: approx. 3.6m Upper carriage outreach: approx. 3.42m Outreach: approx. 2.5m Iedpfx Aszv Hy Tspceig Hook height: approx. 3m Total weight: approx. 350 Kg Includes Abus chain hoist with floor control (2 lifting speeds) with slewing and trolley drive Connection to 400V 16A, slewing range 360° Crane is disassembled and immediately available. The gripper is not included! Item location is 75053 Gondelsheim. Only the crane system shown in the pictures is being sold. Very good condition, see pictures. Shipping via freight forwarder or collection by arrangement.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Iiodjyzw I Iopfx Apcsg Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: good (used), Year of construction: 2010, functionality: limited functionality, number of ink cartridges: 6, color channels: Cmyk, number of print heads: 15, resolution (max.): 1,200 dpi, total length: 5,000 mm, total width: 1,600 mm, total height: 650 mm, space requirement length: 5,000 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, input voltage: 220 V, Uv printer fb 500 scitex Excellent quality and economic Low power consumption We can also provide service manual and teaching how to use Also we can provide second machine as spare parts for just 5 thousand. Second machine is fully working but with no printheads. It is fb 700 scitex. Can print 260 cm. Iijdovc Hlyepfx Apcog

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Iiodpfxexrpm Uj Apcog Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, manufactured in 1997. POWER SUPPLY INPUT MODULE OUTPUT MODULE Model number: 1746-P2 Series: C Input voltage: 85–132 V AC Input voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Isdpfx Apoyutfhjcsig Max. user current at 24 V DC: 0.2 A Replacement fuse: 250 V–3 A fuse Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Iiodpszf Hyrofx Apceg Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), functionality: fully functional, mileage: 667,000 km, fuel type: diesel, overall weight: 44,000 kg, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Year of construction: 2018, Equipment: EBS, air conditioning, cruise control, parking heater, power assisted steering, retarder, seat heater, VOLVO FH 13 500 6X2 26T EURO 6 Iedpfoz Aqg Dex Apcjig VOITH RETARDER STEERABLE AND LIFTING AXLE PARK COOL DAY/NIGHT SYSTEM I-SHIFT AUTOMATIC TRANSMISSION (VOLVO) INTEGRAL ALUMINUM BOX BODY, GUILLOT, 3 FLOORS REFRIGERATION UNIT REFRIGERATOR HEATER

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm Ijdpfx Apjzyl Dreceig

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Iiedjy Sazfspfx Apcog Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2015, condition: used, Renz ABL 500 automatic double wire binding system For book, skip and calendar binding Year: 2015 Equipped with: Colour monitor Manual infeed Binding section KAS calendar hanger feeder Delivery Max mechanical speed: Upto 1.800 books/hour Upto 1.600 calendars/hour Pitch: 3:1 Size tools available: ¼” and 5/16” Iiodpfx Aozicv Dopcog Working width: max 500 mm

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Isdpfx Apozwgntecsig Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T