Used Gweike Bending Machine, Front Bending Machine for sale (81,097)

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm Iodpfx Aheymf Skoyjbc working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg Ibjdpfxoxacfgo Ahyjc In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, Year of construction: 2026, neu 2026 090209 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm Ibjdpfxswirzfs Ahyec 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel Ibsdpsxaacvsfx Ahyjc - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2026, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm Iedpfxsgh T Iae Ahyebc - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg Ibedpfoxabntsx Ahyjc range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, sheet width 2070 mm plate thickness 10 mm Ibsdpfxsvn U H Ae Ahyec pre-bending 8 mm total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 20960 € 402.43 € 40 to 250 mm 200 x 20 mm 1100 x 620 mm 55 mm 4,7 - 9,1 mm/s 45 mm/s 45 l 3 kW 950 mm Isdpfx Ahsxh Ruleyebc 1250 mm 900 mm 1000 mm 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 38000 € 725.8 € 2050 mm 8 mm 8 mm 6 mm 8 mm 6 mm 6 mm 4 mm 180 mm 180 mm 150 mm 5 m/min 3850 mm 1350 mm 1290 mm 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH Ibedpfx Ahjyb S Afoyec OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed

Condition: refurbished (used), functionality: fully functional, overall weight: 1,150 kg, total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2008, operating hours: 882 h, input frequency: 50 Hz, shaft diameter: 105 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile bending machine PBT25 PC400 (will be refurbished, including a new Y-axis measuring device) For sale is a profile bending machine PBT25 with PC300 control, manufactured in 2008. The machine will be completely refurbished and technically inspected by PBT before sale. Technical data: Machine type: Profile bending machine Manufacturer / Model: PBT25 Control: PC300 (upgrade in 2026) Year of manufacture: 2008 Operating hours: approx. 882 hours Condition: Good condition. Fully functional. Availability: Approximately two weeks. Isdpfxjz Ak I Ie Ahysbc Further technical details and specifications according to the manufacturer can be found on pbt-ag.com.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 21900 € 420.48 € 80 to 285 mm 300x25 mm 750x1425 mm 300 mm 105 mm 10 mm/s 10 mm/s 10 kW 930 mm 1430 mm Ibedjwiqrcopfx Ahysc 750 mm 1450 mm 1700 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift Ibjdpfxsxabhaj Ahyjc - Operating instructions

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker Iedpfxsxabhmo Ahysbc - Operation manual

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, Iedpfjz Dxpmjx Ahyobc FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: new, 30 / 900 mm 30 / 900 mm Isdpfoq Adtqjx Ahyebc L-beam 35X35X5 / 600 mm T - beam - web outwards 50x6 / 600 mm Axis diameter 40 mm work speed 4,5 m/min roll diameter 148 mm total power requirement 1,1 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,75 x 0,6 x 1,4 m Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 " - Operation manual - Foot switch left / right and EMERGENCY STOP

Condition: new, 75 (800) mm 60 (750) mm Ijdpfx Ahjfv H Ezjyobc L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 100 x 11 (1000) mm Axis diameter 80 mm work speed 6,0 m/min Tool diameter 242 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts Iodpfx Ahsu Ibukjyjbc *

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers Ijdoxabflspfx Ahysbc - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function Iedjxab E Eepfx Ahysbc * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine Iedoxab Tcspfx Ahyobc - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers Iodpfx Asxabuyehysbc - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 17300 € 332.16 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN Iodpfxjwiqpbj Ahyjbc OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min Ibedjzkbn Iepfx Ahysc engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: new, sheet width 2600 mm Isdpfxexaalqj Ahyobc plate thickness 10,0 mm pre-bending 8,0 mm diameter of upper rolls 230 mm side roll diameter 190 mm diameter of lower rolls 210 mm total power requirement 7,5 kW weight of the machine ca. 5.560 kg. range L-W-H 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic Iedpfoummkaex Ahyjbc