Used Gotha Sharpening Machine for sale (65,179)

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Bljdpfxjyzf Nao Acnjl Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC Bodpfx Acjya H Nkonell For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, Sharpening solutions for chisels and hand tools. Quality that has been proven thousands of times in the trade. ✓ Burr-free grinding without removing the cutting edge! The specially developed grinding principle uses the grinding allowance to prevent the formation of a burr. This makes additional grinding of the cutting edge unnecessary. Side grinding of the cutting edges is possible in the same clamping. ✓ Dry grinding without annealing or burning the workpiece! The heat is dissipated from the workpiece using the grinding allowances. ✓ Time and cost savings! Time is money. The efficient grinding principle sharpens the workpiece within a few seconds. ✓ Extremely easy to use! The system is simple, easy and quick to use. Effortless clamping and unclamping of the tools. Even trainees or unskilled workers can operate this machine. Problem-free and masterfully. ✓ Inexpensive maintenance! The machine has hardly any wearing parts. Only the grinding allowances and the grinding wheel wear out. ✓ Swiss quality! High-quality components guarantee stability and durability. Machines that are up to 50 years old are still in use. Blsdpfjvrbubex Acnjl ✓ Swiss precision! The machine stands for a guaranteed high-quality grinding result. SAVE TIME, MONEY AND NERVES Application example: plane irons and chisels Sharpening and honing: Conventional methods: 4.0 min ISELI method: 0.5 min. ⇒ TIME SAVING: 3.5 min. Every medium-sized company has to sharpen at least 6 tools every day. This used to take 24 minutes. With the ISELI sharpening method, it only takes 3 minutes. You therefore save 21 minutes per day, 4620 minutes per year (for 220 days) or the equivalent of 77 hours. Based on EUR 35.-- per working hour including operating costs, you save around EUR 2,700.00 per year.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Blsdpfx Acezmyzfonel

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Blsdpfszrnkrox Acnsl Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) Blodpoznwu Ssfx Acnel - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Bledpjzb Ipzsfx Acnjl 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. Bljdpfeza T A Rox Acnsl We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Weight 800 kg Total power requirement 3 kw Bodpfx Ajv A Hgwscnjll

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration Bjdpfx Acszf Nk Tenoll FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Bodpfxozg D I As Acnoll NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: excellent (used), XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Blsdpfx Acjzuxnaenjl For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Bsdpfx Acjzu Ni Ujnjll Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Blsdoxftqdepfx Acnel quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 1985, machine/vehicle number: 16924, Offer 22090 Technical data: - Drilling capacity in steel ST 60 20 mm - Drill spindle holder MK 2 - Drill spindle stroke 120 mm - 4 drill spindle speeds 400 - 2000 rpm - throat depth 250 mm - Max. distance table - drill spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack and pinion with hand crank Bljdpetz T Dvsfx Acnsl - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK Blsdpfey Du N Usx Acnjl COOLANT SYSTEM WHEEL MOUNTED DRESSER

Year of construction: 1999, condition: excellent (used), Technical specifications Manufacturer: Carl Zeiss Type: Carmet CNC RDS Duplex Year of manufacture: 1999 Measuring table X = 6000 mm Y = 3000 mm Measuring range X = 5000 mm Y = 2600 mm Z = 2100 mm Equipment Blodpefgumcofx Acnsl C99 (current Zeiss control system) RDS rotary swivel head for tactile probing Dynalog control panel The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively aimed at professional customers! (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 013012 / 013013, Technical Data Manufacturer: Wenzel Type: RS1625 plus (Two-column) CNC Year of manufacture: 2001 Bodpfsfluuwox Acnoll Serial number: 013012 / 013013 Measuring range X = 6500 mm Y = 1600 mm / 1600 mm Z = 2500 mm Measuring table 7200 mm x 3280 mm (divided at Y0) Measuring accuracy 40 µm + (L / 25 µm), but a maximum of 100 µm Accessories Software: Metrosoft CM SP2 Controller: 2 x Wenzel WPC 2030 / Renishaw PI200 Probe Interface Control panel: 2 x Wenzel HT400 (cable) / 2 x Key Sonic keyboard (wireless) / 2 x HP monitor The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Year of construction: 1996, condition: used, Technical Data: Type: Micro Xcel Manufacturer: Brown & Sharpe Year of construction: 1996 Actual operating system: Windows Measuring Software: Tutor CAA (Error correction): yes Bljdpfx Acjbx R Trensl Probe head: Principle of measurement: switching probe Typ: Renishaw MIH rotatable: yes/7,5 The machine can be mordernized with new software and gear on demand. Measurement range: X = 700 mm Y = 600 mm Z = 500 mm Error of Measurement: U3=6L/1000 Price: on application! We'd like to make you a detailed offer! Note: We offer to qualificated customers only. (Errors, changes and omissions excepted in technical data and translations)

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Bsdpfx Asht Hlljcnsll

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 105324, Technical Data Manufacturer: ZEISS Blodpfjhy Tc Rox Acnel Type: Carmet C 160 418163 Year of Manufacture: 1998 Serial Number: 105324 Weight: 400 kg Measuring Plate X = 6000 mm Y = 3000 mm Measuring Range X = 5000 mm Y = 2600 mm Z = 2100 mm The machine can be modernized with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We would be happy to provide you with a detailed offer. Note: Our offer is exclusively for professional customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: excellent (used), Technical Specifications Manufacturer: ZEISS Blodpfxsh R Nchs Acnel Type: Contura G2 Technical specifications available upon request The machine can be upgraded with new accessories according to customer requirements. Price: available upon request! Installation and commissioning possible! We would be happy to prepare a detailed offer for you. Note: Our offer is exclusively for specialist customers. (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. Bedpfx Asq Nf S Rjcnjll 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Year of construction: 2001, condition: excellent (used), Technical data Manufacturer: Carl Zeiss Type: Carmet C 160 Year of manufacture: 2001 Plate divided into two parts with a total length of 13280 mm Measuring plate X1 = 7280 mm X2 = 6000 mm Y = 3020 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Bledsnbd Dhopfx Acnsl Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Year of construction: 1999, condition: good (used), Technical Specifications Type: SMM-D Manufacturer: ZEISS Design: Stand-alone design, single and multi-stand versions Drives: High-dynamic DC servo drives, electronically monitored in all axes Control System: Multi-microcomputer system with 3-axis vector control for optimal control performance 4th and 5th axis rotary-swivel unit DSE 05 Control panel for operation at a remote measuring location Manual control of measuring device and DSE 05 via control lever with progressive characteristics, switchable to slow speed Protection class IP 54 for control system and control panel Display of workpiece or device coordinates via display on the control panel or on the screen on the computer Measuring Plate X = 16000 mm Y = 6100 mm Bjdpfxocilvvo Acnjll Measuring Volume X = 8000 mm Y = 3100 mm Z = 2700 mm Probe Head Rotary-Swivel Unit DSE 05 Motorized rotation in two orthogonal axes by +/- 180° each Incremental measuring system with 0.5 µm resolution Angular velocity up to 40°/second Angular position deviation +/- 3° Max. torque: 140 Nm Max. sensor weight: 1000g Reproducibility