Used Genomix 10X Next Gen Single Cell Controller for sale (51,928)

Condition: ready for operation (used), Siemens rotor for 1FT6086-1AF71 servo motor, serial number: EL695420801002, used, in good condition, 100% functional, scope of supply as shown in the photos. Crjdpfx Aozhdtneilsd

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 Codpezhcfvsfx Ailord rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Cedpfx Aezina Ijilord Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N - Fast force control over the entire force range PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz Credpfx Aiszil I Aslod - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: used, Year of construction: 2013, machine/vehicle number: 0-250-21-1606, Machining center with collet clamping for the workpiece, 2 workpiece collets with integrated stop system, workpiece length: max. 2,500 mm, workpiece width: max. 1,000 mm, workpiece thickness: max. 80 mm (2x40 mm), workpiece support area including air cushion support table, workpiece removal area with transverse belt conveyor and lifting arms, one machining support each at the top and bottom equipped with the V42, H8X, N2 X-Y 90 configuration, F2-6 kW with 42 vertical drilling spindles + 10 horizontal drilling spindles (8 in the X direction and 2 in the Y direction) + nut saw swiveling 90° in the X-Y direction + milling unit with tool holder for shank diameter: 25 mm, 2 dowel insertion stations for the automatic insertion of dowels on the 2 workpiece longitudinal edges, Powercontrol PC85 control system, including tool trolley with various shank milling cutters and saw blades. Cjdpfezha Dpsx Ailord

Year of construction: 1995, condition: good (used), Robust, remotely controlled timber transport trolley from Möhringer, model Robocontrol. Track gauge: 980 mm. Trolley height: 430 mm. Fully hydraulic. Travel speed: 100 m/min. Equipped with timber rotating chains and a clamping device. Robust auxiliary trolley with timber rotating chains. Fully hydraulic. Electrical control cabinet with control system. Cabin electrically powered, with noise insulation and heating. 2 doors, front window can be opened. Comfort seat. Control elements and flat cable. Csdeziltfspfx Ailord

Condition: used, functionality: fully functional, machine/vehicle number: 001668U, load capacity: 1,000 kg, For sale Used Demag single-girder overhead crane, approximately 12,300 mm span x 1,000 kg capacity. Ref. 001668U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver installed, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection Crsdpfxjzilrne Ailsd You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001667U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 14,800 mm span x 10,000 kg capacity. Ref. 001667U * Stored indoors * Technically 100% operational and inspected Cjdpfezilgxex Ailord All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001666U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 14,800 mm span x 10,000 kg capacity. Ref. 001666U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! Crjdpfx Aiozilgljlod We can optionally supply our cranes including: * Adjustment of length and/or height, and possible repainting * Power rails / conductor bar system * Radio control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001665U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 14,800 mm span x 10,000 kg capacity. Ref. 001665U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we deliver with installation, are supplied with a warranty! We can also supply our offered cranes including: * Adjustment of length and/or height and, if desired, repainting * Power rail / busbar * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Credpjzilf Usfx Ailsd Single-girder crane. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001664U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 14,800 mm span x 10,000 kg capacity. Ref. 001664U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height and possible repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Crsdezilf Iepfx Ailsd Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001663U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 16,500 mm span x 10,000 kg capacity. Suitable for outdoor use. Ref. 001663U * Technically 100% in order and inspected. All our new and used cranes, which we supply with installation, come with a warranty! Csdpfozilfuox Ailjrd We can optionally supply our cranes including: * Adjustment in length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001662U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 2 x 5,000 kg capacity. Ref. 001662U * Stored indoors * Technically 100% functional and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Crodpfszilfhox Ailod Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001661U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 6,300 kg capacity. Ref. 001661U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! We can supply our offered cranes, if desired, including: * Adjustments in length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: Crjdpfx Aszildqoilod * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001660U, load capacity: 5,000 kg, For sale Used Abus single-girder overhead crane, approximately 18,100 mm span x 5,000 kg capacity. Ref. 001660U * Stored indoors * Technically 100% sound and inspected All our new and used cranes that we supply and install come with a warranty! We can supply our offered cranes, if required, including: * Adjustments to length and/or height, and repainting if desired * Power rails / conductor bar * Radio control * Tandem control * Installation and inspection Crsdpfxjzildks Ailsd You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, lifting equipment, hall crane, bridge crane, workshop crane, storage crane. Overhead crane. Single-girder crane. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001659U, load capacity: 5,000 kg, For sale Csdpfezilcmjx Ailsrd Used Abus single-girder overhead crane, approximately 18,100 mm span x 5,000 kg capacity. Ref. 001659U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and repainting if required * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, roller crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001658U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001658U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver fully assembled, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and, if required, repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Jan Reiling B.V. also offers: * New lifting equipment * Spare parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. Cedpfxszilbpo Ailord For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001657U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001657U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply and install, come with a warranty! We can optionally supply our cranes including: * Adjustments to length and/or height, and repainting if required * Power rail / conductor bar system * Radio remote control * Tandem control * Assembly and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Crjdpfx Aiozila Esljd In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, jib crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001656U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 18,100 mm span x 6,300 kg capacity. Ref. 001656U * Stored in a dry environment * Technically 100% sound and inspected All our new and used cranes, which we supply and install, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and optional repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Spare parts for your lifting equipment Codpfszilaljx Ailerd * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag spare parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001655U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 20,500 mm span x 6,300 kg capacity. Ref. 001655U * Stored indoors * Technically 100% in order and inspected Codpezilafefx Ailsrd All our new and used cranes, which we deliver installed, come with a warranty! We can optionally supply our cranes including: * Modifications in length and/or height and, if required, repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001654U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 20,500 mm span x 6,300 kg capacity. Crsdpfx Aiozik Stelsd Ref. 001654U * Stored indoors * Technically 100% in good condition and inspected All our new and used cranes, which we supply assembled, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height and possible repainting * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001653U, load capacity: 6,300 kg, For sale Used Abus single-girder overhead crane, approximately 20,500 mm span x 6,300 kg capacity. Ref. 001653U * Stored indoors * Technically 100% in good condition and inspected All our new and used cranes that we supply and install come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Cjdpfx Aiszik Sgjlsrd In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, lifting equipment, hall crane, bridge crane, workshop crane, storage crane. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001652U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001652U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Slewing cranes * KBK X/Y systems * Chain hoists Crsdpozik Rcjfx Ailjd * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, see the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001649U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 17,000 mm span x 6,300 kg capacity. Ref. 001649U * Stored in a dry environment * Technically 100% in order and inspected All our new and used cranes that we install are supplied with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and repainting if required * Power rails / conductor bar system * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists Cjdpfx Aiezik Nxjlsrd * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, machine/vehicle number: 001648U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, approximately 17,000 mm span x 10,000 kg capacity. Ref. 001648U * Stored indoors * Technically 100% operational and inspected All our new and used cranes, which we deliver and install, come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height, and repainting if required * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection Jan Reiling B.V. also offers: * New hoisting equipment * Parts for your hoisting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Cedszik H Dopfx Ailjrd In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment. Overhead crane. Single-girder crane. Chain hoist.