Used Format4 Circular Sawing Machines for sale (66,568)

Condition: new, Year of construction: 2026, The CORMAK MCB350HD cutter in this segment of machines is the largest cutter with very large cutting capacity of 350x260. It has a more powerful engine and a convenient control panel. Machine arm made of one-piece cast iron with additional ribs for greater rigidity. Reversible cutting angle from -45° to 60°. Machine characteristics Rsdpfxoi D Di So An Aot The CORMAK MCB350HD metal band saw with CE enables cutting in a plane perpendicular to the axis of the cut material or at any angle in the range from -45 to +60 degrees. The cut piece can be fed manually or through any feeding device. The feed during cutting is gravitational based on the principle of oil flow in a two-chamber hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. When the cut is complete, the machine automatically stops and the operator raises the arm manually to the starting position. Feeding is done manually. This model is used for both unit and serial production, and due to its robust construction, it can cut a wide range of materials, including stainless steel, tool steel, solid materials and profiles. The device enables angular cutting of the material by turning the arm to the left and right. The cutter arm made of a uniform cast iron together with the 27 mm wide cutting band used in this cutter allows you to fully perform multi-series cuts of both profiles and solid materials. The arm is equipped with an automatic blade tension sensor, it is tilted by 25 degrees, which increases the life of the blade. A cleaning brush is attached to the bottom of the arm for perfect blade cleanliness and function. The drive of the machine is transmitted through a worm gear filled with gear oil. The machine has a three-phase motor with double windings and two cutting speeds. Motor thermal protection. This cutter has a very large range of work when cutting at an angle from 45º to the left to 60º to the right. The machine has two speeds of the cutting band: 32 and 72 m/min. A cutter with an automatic, smoothly adjustable, gravitational arm feed downwards. Construction: the frame, vice and rotating table are cast iron. Closed emulsion cooling system with fluid distribution to the blade guides. The machine is equipped with a bumper with a ruler for setting the length of the cut material. At the back of the machine there is a roller feeding the material to be cut. Safety during the cutting process is ensured by an electrical installation that meets all CE requirements. The machine has a limit switch that stops the machine after the cutting process is finished, an emergency switch, the so-called "safety mushroom", a series of microswitches that turn off the machine when, for example, we open the cover of the belt transmission or the cover of the cutting band. Technical data MINIMUM CUTTING DIAMETER - ø5mm MINIMUM LENGTH OF MATERIAL IN VISE - 100mm DISTANCE OF THE VISE BASE FROM THE GROUND - 940mm CUTTING BAND DIMENSIONS - 2950x27x0.9mm TOTAL POWER - 2.2kW TAPE SPEED - 36 / 72 m min-1 DRIVE/PULLEY DIAMETER - 330mm DIMENSIONS - 2000x1330x2020mm WEIGHT - 540kg ANGLE PIPE PROFILE SQUARE 0º-- ø270 350 × 240 260 x 260 45º R ø230 230 × 150 210 x 210 45º L ø200 200 × 170 170 x 170 60º R ø140 140 × 140 140 x 140 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Redpfxswq A Dye An Aet Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2018, condition: used, functionality: limited functionality, ABM PRESTIGE Line (2× PRESTIGE + 1× LOAD-5) Subject of Sale: Used circular saw sharpening line Model: 2 × PRESTIGE (HSS/CERMET grinders) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Location: Poland / Katowice Availability: Immediate • High level of automation, minimal operator involvement • HSS & CERMET grinding in a single cycle • High precision and repeatability • 5-station magazine (LOAD-5) • Fast and efficient production • Wide functionality (face/top/side grinding, chipbreaker, automatic measuring) • Price: below (as a set, i.e. two stationary machines and 5-station automatic loader) • Transport & disassembly: by the buyer • Warranty: none • Training: optional (paid) • Year of manufacture: 2018 + 2021 (Both Prestige machines can also operate independently as standalone stationary machines) Redoy Ed Snopfx An Aet • New line price: 321,000 EUR

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 350 mm, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, cutting length (max.): 3,200 mm, intake manifold diameter: 120 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Rodey Ai U Ajpfx An Aot Saw blade diameter min.: 300 mm Saw blade diameter max.: 350 mm Saw blade bore diameter: 30 mm Dust extraction nozzle diameter: 120 mm Max. spindle speed: 4,000 rpm (automatically adjustable) MACHINE DETAILS Voltage: 400 V Power consumption: 18.5 A Fuse: 25 A Transport packages: 2

Condition: new, Year of construction: 2026, Working width: 400 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: saw cut finish 2. Brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Redjgrladepfx An Aot Saw cutting unit motor power: 1.1 kW Brush motor power: 3 kW Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 1400 mm Weight: 550 kg

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Rodomftiwepfx An Ajt Standard Equipment: ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Year of construction: 1995, condition: used, functionality: fully functional, We are offering this used Emmegi COMBI STAR TU/6 double-head saw, year of manufacture 1995. Model: COMBI STAR TU/6 Serial number: 2319211 Manufacture date: 11.95 Weight: 2250 kg Rodpey D S Uusfx An Ast Motor model: 71G2 Motor power: 2.2 kW Speed: 2820 rpm Total power: 5.8 kW Current: 14.5 A Voltage: 380/3 V Frequency: 50 Hz If you have any questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Rodsy D Sywspfx An Aot

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line Rjdpfxjq E Ivte An Aet INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: used, Year of construction: 1989, saw blade diameter 400 mm Rsdpjy D A E Dsfx An Ajt capacity 90 degrees: round 120 mm turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw

Condition: like new (used), Log circular saw, for diameter until 1100mm Rsdpji Ek Hpjfx An Ajt

Condition: used, length ~ 600 mm width ~ 700 mm height ~ 1.000 mm Redpjulfftjfx An Ast saw-blade dia. max. ~ 300 mm Sharpening machine cut-off saw for sharpening small circular saw blades.

Year of construction: 2017, condition: used, machine/vehicle number: 6705 104 160, Power: 6 kW, weight: 2,200 kg, 1 roller conveyor, length: approx. 500 cm, 2 heavy-duty dollies, 1 extensive batch of saw bands, various versions, approx. 67 pieces, mostly as new, 1 chair Rsdpfoyztd Eex An Aot

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 69,430.00 69,430.00 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 RPM. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter. Including CPU 315 and Flexisoft, piece count multiplier for bundle cutting operations. Cycle time indicated in seconds, chain dimension, including reversing device for section lengths up to 4 m max. Automatic shut-off via limit switch at end of workpiece, error diagnostics, including IXON router for VPN connection, see datasheet. Motorized saw blade feed, continuously adjustable, vertical and horizontal clamping from below upwards, feed and discharge side at the saw head, cutting gap expansion on both sides of the saw blade. Electronic material feed unit, 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping device. The profile support area in the feed section is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile. Clamping pressure reduction horizontal and vertical with 6 pressure regulators, timed spray device with fill level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm, safety guard above the saw head and feed unit, 740 mm roller conveyor with reach-in protection on the infeed side, 450 mm Pertinax table plate with reach-in protection on the discharge side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which is detachable for easy emptying. 2 outlets with 100 mm hose adapters, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Rodpfx Aey Dtpmon Ast Selector switch for continuous operation or operation controlled by the saw, without power cable, paint finish: RAL 7035 / 9016.

Condition: excellent (used), functionality: fully functional, Engine power 2.2 KW Manual aggregate movement Disc diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Rsdpfxowbpwhj An Aet Starting the cutting process with a pedal Safety switch Width 900 mm, height 1500 mm

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: Redpfx Ansyn Ikro Aot - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: used, Esterer DKV double edger Maximum pass-through height: 160 mm Maximum pass-through width: 800 mm Zero line on the right Left-hand machine (adjustable saw blade on the left) with 2 crosscut saws with roller infeed with lath head with sliver separator with drive motor (45 kW) with control cabinet Redpfoy Da Iijx An Ast with saw blades Location: Germany, near Lake Chiemsee

Condition: used, Trimming saw Esterer DKE Passage width: 600 mm Passage height: 160 mm with 22 kW drive motor including spare saw blades including spare templates Location: Germany, near Chiemsee Rsdpfxjy Da Hfj An Ajt

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Redpfjwzmvbox An Aot Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: excellent (used), Year of construction: 2019, operating hours: 9,365 h, functionality: fully functional, Saw for cutting steel pipes and profiles Redpfxoy A Rpbe An Ast Year of manufacture: 2019 9365 hrs Input material length: 6000-7000 mm Cutting diameter: 12-100 mm Output lengths: 50-2000 mm.

Condition: new, functionality: fully functional, cutting height (max.): 210 mm, overall weight: 1,100 kg, saw blade diameter: 600 mm, disc diameter: 120 mm, spindle diameter: 30 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, plate length: 2,800 mm, plate width: 2,070 mm, table length: 3,200 mm, Manufacturer: DANIBRUM – Romania Sliding table length: *optional 3670 – 3800 mm, 3200 mm Sliding table width: 430 mm Cutting length: 3400 mm, 3670 – 3800 mm / optional Cutting width on the right side: 1300 mm Maximum cutting height at 90°: 210 mm Maximum cutting height at 45°: 120 mm Blade diameter (Ø): 280 – 600 mm Blade bore diameter (Ø): 30 mm Scorer bore diameter (Ø): 20 mm Main blade speeds: 4500 rpm, 5000 rpm Scorer blade speed: 8200 rpm Scorer height adjustment: yes Scorer cutting depth: 10 mm Main blade height adjustment: electric Motor power: 5 kW, 7 kW – optional Scorer motor power: 1.1 kW Extraction hood diameter (Ø): 100 mm Overall dimensions: 3600 x 3700 x 1800 mm Rodpfxey A Nxbj An Aet Model: PRISMA 5

Condition: excellent (used), functionality: fully functional, Automatic leveling machine for bandsaw blades. For automatic measurement, inspection, and correction of irregularities. Blade widths from 50 to 300 mm. Very well-maintained machine. Low usage. As good as new. Technical data in the PDF file. Rodpjy A Igwsfx An Ajt

Condition: used, Year of construction: 2020, machine/vehicle number: AHJA2005118, Offer 26102 Technical data: - Cutting range: 140 - 330 mm - Wall thicknesses up to: 5 mm - 6 cutting speeds: 95 - 230 rpm - Central tube clamping via handwheel - Manual rotation drive / cutting drive - Height-adjustable saw unit - Drive: 220 V / 1200 Watts - Required space (W x H x D): approx. 900 x 1000 x 400 mm Redpfxoy A Eyus An Aet - Weight: approx. 400 kg - 2 x roller conveyors, each 1500 mm

Year of construction: 2024, condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Machine in stock and ready for shipping Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) Rodpfsd Izq Hjx An Ajt - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes Rjdpfxjpl Tgme An Ajt