Used Fliegl Sds 420 Multi High Cube for sale (24,392)

Condition: used, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, tire size: 235/75 r17,5, Year of construction: 2017, Further information Chassis: Welded steel construction, double offset with drop deck in front of and behind axle unit, drop deck slanted towards entrance, turntable with strong ball bearing slewing ring, folding rear support, wheel chocks, side collision protection, quarter-shell mudguards Lashing eyes: above front axle: 2 pairs of ring lashing eyes per 5 tons at the front on the offset drop deck/rear axle: 6 pairs of lashing eyes laterally in the drop deck per 8 tons, 6 pairs of lashing eyes per 5 tons between the side members, pair of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 tons ring lashing eyes embedded in the floor. Ring lashing eyes embedded in the floor Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Redpfx Aei Ri N Ueg Usu Brake system: 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads Electrical system: 24 volt, multi-chamber lights, amber lighting at the sides, 2 white position lights at the front 2 white/red lane departure lights at the rear, rotating beacon with holder, pair of warning signs illuminated and extendable to 3,000 mm, 2 x 7-pin interchangeable plugs at the front Floor: Front offset with steel / checker plate covering, storage box recessed in drive-over slope to offset, tramline area and in the middle between the beams with steel / checker plate covering, rear slope with 70 mm softwood floor, deep loading area incl. rear slope 5900 mm Drive-on ramps: Hook-in strip for aluminum ramps across the entire width. as U-profile across the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT22001011091, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, Further information Chassis Central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Mudflaps in front of each axle and anti-spray mudflaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel mounting kit 1x spare wheel, brand same as original tires, steel rim 1x stainless steel toolbox, b=600/h=400/d=500 mm, with polished, lockable door Low-loader lashing rings 5 pairs of stake pockets recessed in outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 7 pairs of lashing mushrooms recessed on top and side in outer frame, each rated at 10 t 2 additional pairs of folding lashing rings recessed in low-bed area, each rated at 10 t (1 pair at the front and 1 pair in rear slope) Central axle trailer drawbar Drawbar with certified 50 mm towing eye Axles & suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing 1810 mm (allows 10 t axle load, technical) Air suspension Brake system 2-line compressed air brake system, color-coded for easy service Spring-actuated parking brake Duomatic connection at front with connecting line to the towing vehicle EBS, electronic brake system with EBS plug at front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal for display in cab, truck must be pre-equipped, no truck installation (no calibrated scale) Wheels and tires 235/75 R17.5 Fulda brand Steel rims, factory silver Rsdjp N Dgujpfx Ag Uou Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with holder, controlled via parking light (removable beacon) Floor 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear slope with Mega Grip surface made of serrated grating Low-loading platform including rear slope: 6500 mm Front bulkhead / corner posts 25 mm aluminum hollow section, 400 mm high, detachable Ramps Steel ramps, 3600 mm long, 750 mm wide, split with cable pull extension, laterally adjustable Ramp spacing, minimum gap approx. 600 mm, maximum outside width approx. 2880 mm Ramp surface with Mega Grip made of serrated grating Hydraulic operation via own electrohydraulic unit mounted in steel box; operation on right side of vehicle. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in combination with hydraulic ramp operation)

Condition: used, machine/vehicle number: WFDFLT21301005260, empty load weight: 2,500 kg, maximum load weight: 10,900 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2015, tire size: 285/70 r19,5, Year of construction: 2015, Further information Chassis: fine-grained steel welded construction, telescopic support leg, wheel chocks with holder, steel underride guard, half-shell mudguards Towing equipment for tandem trailer: Towbar with tested 50 mm towing eye, under-coupler, mechanically length-adjustable towbar Redpsi Ri Rrjfx Ag Usu Axles: BPW disc brake axles, air suspension with lifting & lowering valve, electronic dolly steering system Brake system: 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connecting lines to the tractor unit, interchangeable coupling heads to the trailer, EBS, electronic brake system with EBS plug at the front, with connecting cable Electrical system: 24 volt, amber lighting at the sides, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck, 1 x 15-pin plug with connecting cable to the trailer Approval: Contour markings with reflective strips to ECE R 048, warning sign to ECE - 70, truck Saddle height approx.: 950 mm

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, tire size: 285/70 r19,5, Year of construction: 2013, Further information 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! - 4 VEHICLES AVAILABLE! Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpin with ball bearing slewing ring, max. 20° stop, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards \CLG\ under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. BPW disc brake axles, air suspension with lifting & lowering valve 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cableEBS connecting cable to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, without truck instal. 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips to ECE R 048, white at the sides and red at the rear Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2 kingpins with ball bearing slewing ring, max. 20° stop, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards CLG under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. Redpfxei Ri N Re Ag Uou BPW disc brake axles, air suspension with lift & lower valve 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer EBS, electronic brake system with EBS plug at the front, with connecting cableEBS connecting cable to the trailer Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, without truck instal. 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Saddle height approx.: 1150 mm

Condition: used, functionality: not functional, machine/vehicle number: WFDFLT21601003376, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 01/2014, tire size: 285/70 r19,5, Year of construction: 2013, Further information Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpins, telescopic support foot, wheel chocks with holder, steel underride guard, half-shell mudguards Towbar with tested 50 mm towing eye, under-coupler towbar mechanically adjustable in length BPW disc brake axles, air suspension with lifting & lowering valve, electronic dolly steering system, encoder via contact in the towing eye (required in Germany to comply with the BO circle or trailer must be steered) 2-line compressed air brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit2 non-interchangeable coupling heads to the trailer EBS, electronic brake system with EBS plug at front, with connecting cable, EBS connecting cable to trailer, axle load detection for truck via EBS, without truck instal. 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour markings with reflective strips to ECE R 048, white at the sides and red at the rear, warning sign to ECE - 70 Redpsi Riydjfx Ag Uju Saddle height approx.: 960 mm

Condition: used, functionality: unexamined, machine/vehicle number: WFDFLT21301003569, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Year of construction: 2014, Further information Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpin with ball bearing slewing ring, stop max. 20°, telescopic support foot, 2 wheel chocks with holder, steel underride guard, half-shell mudguards CLG under-coupler drawbar with tested 50 mm drawbar eyes to the dolly and to the motor vehicle. BPW disc brake axles, air suspension with lift & lower valve Redpsi Rizmjfx Ag Usu 2-line compressed air brake system, spring-loaded parking brake, Duomatic front coupling head, with connecting lines to the tractor unit2 interchangeable coupling heads to the trailer EBS, electronic braking system with EBS plug at the front, with connecting cable, Can RouterEBS connecting cable to the trailer, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection for trucks via EBS, without truck instal. 24 volt, multi-chamber LED lights, amber LED lighting at the sides, 2 white LED position lights at the front 2 white/red rear lane departure warning lights in LED, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin plug with connecting cable to the trailer, cable routing for camera system Country of registration: Germany, with Dekra approval, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Saddle height approx.: 1150 mm

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Year of construction: 2017, Further information Fine-grained steel welded construction, fifth wheel coupling, make of our choice for 2\ kingpin, telescopic support foot, wheel chocks with holder, steel underride guard, half-shell mudguards, removable upper parts Towbar with tested 50 mm towing eye, under-coupler towbar BPW disc brake axles, air suspension with lift & lower valve, mechanical dolly steering system (required in Germany to comply with the BO circle) 2-line compressed air brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connecting lines to the tractor unit, Duomatic coupling head to the trailer, incl. connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cableEBS connecting cable to the trailer, with CAN router, axle load detection for trucks via EBS, without truck instal. Rsdpfx Aji Rivtog Uju Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck 1 x 15-pin socket, with connecting spiral to the semi-trailer, cable for reversing camera system with socket with Dekra approval, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear, warning sign to ECE - 70 Saddle height approx.: 960 mm

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT21801013661, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, total length: 9,770 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 265/70 R19,5", color: grey, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 3,500 kg +/- build tolerance Payload approx.: 14,500 kg Axle load: 9,000 kg Overall length approx.: 9,770 mm Maximum overall width: 2,550 mm Roller track length approx.: 7,080 mm Loading height approx.: 1,150 mm Drawbar height approx.: 800 mm Drawbar length approx.: 2,500 mm Chassis: Turntable Waste Disposal Trailer Fine grain steel welded construction 2 longitudinal beams with cross members, upper side of longitudinal beams designed as a container roller track in wear-resistant version, loadable from the rear, with run-up slope. Suitable for roll-off containers of 6.0/6.5/7.0 m. Container locking system: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation Rsdeyxq H Eopfx Ag Uou The container locking system is a 2-point, internally acting mechanism; containers with interior webs cannot be locked. (Suitable for transporting roll-off containers with subframe according to DIN 30722) (Roll-off containers are loaded and unloaded from the rear.) Heavy-duty turntable with robust ball bearing ring Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Half shell mudguards Lockable plastic toolbox, width=600 mm / height=425 mm / depth=460 mm Open storage box for container net Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension with lift & lower valve Wheels and Tires: 265 / 70 R 19.5" (manufacturer's choice) 8 steel rims in twin arrangement, factory silver Brake System: 2-line compressed air brake system Spring-loaded parking brake Drive-away lock: When the container lock is open, the spring-loaded parking brake is activated. Vehicle – Driving Stability System: Duomatic coupling at the front with connecting line to the truck, 24V EBS electronic braking system with EBS plug at front, with connecting cable Note: The trailer may only be towed by vehicles that can ensure the functionality of the ABS! Electrics: 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connecting cable 2 additional LED work lights at the rear, operated via reverse light The images shown are archive photos; the vehicle may still be in use!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Year of construction: 2010, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Rjdpfxoyxq A Hs Ag Ueu Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21802027375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2020, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 30 %, color: grey, Year of construction: 2020, The images shown are archive images! Weights and Dimensions: Gross weight: 18,000 kg Payload approx.: 15,380 kg Aggregate load: 18,000 kg Unladen weight (basic version) approx.: 2,620 kg +/- construction tolerance Overall length with swap body 7,450 mm approx.: 9,470 mm Overall width max.: 2,550 mm Chassis height lowered approx.: 1,180 mm Chassis height raised approx.: 1,380 mm Chassis height in driving position approx.: 1,260 mm Parking height approx.: 1,220 to 1,320 mm Standard stop to front locking approx.: 800 mm Locking distance: 5,853 mm Drawbar height approx.: 800 mm Drawbar length (set at) approx.: 2,200 mm Clear drawbar length from stop with swap body 7,450 approx.: 1,970 mm Parking heights are based on level ground. Note! No articulation possible when lowered! Fine-grain steel welded construction Fliegl "V-Stream" frame Adjustable and foldable front stop Removable pair of guide rollers, front and rear 4 container locks with sturdy outriggers on 20"-base for swap bodies 7.15 and 7.45 Turntable with strong slewing ring 2x wheel chocks with holder Aluminum side underrun protection Side underrun protection positioned inward for optimal clearance to swap body supports Steel rear underrun guard Rear underrun guard shortened for optimal clearance to swap body supports, lighting unit mounted protected Half-shell mudguards Without impact protection Drawbar coupling for turntable trailer Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system: 2-line compressed air brake system, color-coded lines for easy servicing. Air reservoir 208 liters Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting pipes to the truck, EBS, electronic braking system with EBS socket at the front, with connecting cable, Note: The trailer may only be towed by tractors which ensure effective ABS performance! With lift & lower valve, holding function in both raised and lowered positions Wheels and Tires: Rodpfx Ajyxqrzjg Usu 385/65 R22.5, make as per manufacturer's choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber lights, LED side marker lights (yellow) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable Registration Country/License Plates: Germany With Dekra approval and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides, red at the rear Paintwork: Frame hot-dip galvanized incl. passivation "15-year warranty against rust-through" The images shown are archive images!

Condition: used, empty load weight: 5,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 2,550 mm, total height: 13,100 mm, suspension: air, tire size: 385/65R22,5, | Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Top condition | Austrian vehicle Rjdpfxjyp Hd Hs Ag Uju

Condition: used, empty load weight: 6,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2016, suspension: air, tire size: 385/65 R22,5, Year of construction: 2016, Equipment: ABS, Tare weight: 6460kg, GVW: 35000kg, Tyre size: 385/65 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Electronic Brake System EBS, Fire extinguisher holder, Toolbox, 1x15 and 2x7 pin plug, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Rodpfx Asyvlqgsg Uju

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes Redpfoyu Rlljx Ag Uju For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front Rodeyux H Dopfx Ag Usu 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm Rsdpjvzk Najfx Ag Usu 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: excellent (used), Microbox Simatic PC 420 Rjdpfxeim H Sho Ag Usu 6 A G 4040-OAE 10-OA BO S VPTN 00 1726

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. Rsdjq Nd Rbjpfx Ag Ueu - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: good (used), axle configuration: 3 axles, first registration: 08/2011, suspension: air, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Steerable Weights Unladen weight: 7,100 kg Payload: 31,900 kg gross vehicle weight: 39,000 kg Condition Technical condition: Good Visual condition: Good Warranty Warranty: No liability for printing & typographical errors. Subject to changes, prior sale, and mistakes! Further Information Please contact Emad Al Shogran for more information. Vehicle number: Trailer: 12 Fliegl / BPW / Steering + Lift Axle / Extendable .: WFDFLT333501001822 German vehicle TÜV: General Inspection: 05.2024 - Safety Inspection: 11.2023 F.1 Technically permissible total mass in kg: 39,000 G Unladen weight: 7,100 kg Steering + Lift Axle BPW axle Extendable = Company Information = No liability for printing & typographical errors. Subject to alterations, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Rodpfx Aoydqn Esg Uou Mobile: Ms. Sabine Faust Email:

Condition: new, machine/vehicle number: 11be0b1246b37a0869e99ab60, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front end, patented 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensating ram 2 wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards with anti-spray only on the last axle 1 tarpaulin bar with bracket 2 tow hooks at the rear Axles & Suspension SAF disc braked axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Offroad version axles Air suspension 1st axle: automatic lift axle, including forced lowering and traction aid, activation via 3x braking (traction aid functional up to an axle load exceedance of 30% and a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years warranty against corrosion Braking System 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 tires, manufacturer at the supplier’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via in-cab display via EBS, truck not installed (requirement must be met by the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED side lighting Yellow LED side indicators linked with turn signals "flashing side lights" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-quality, wear-resistant material; 5 mm thick bulkhead with external end walls made from 30 mm hollow profiles, neatly welded with aggregate-repelling upper rail profile. Interior with ladder at bulkhead (not available with Cramaro). Shovel and broom holders outside at the bulkhead. Greenline - conical and aerodynamic body shape Membrane rear wall Swing tailgate with double hinge, external, with 2-point hook locking. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 6 mm thick floor Step platform with ladder, connecting plate for air/electric/breaking with ample space for optimal operability. Roll tarp stored on right-hand side for FR, with central locking on left-hand side for FR Country of Registration / License Plates Germany Certificate of approval according to EC 2007/46 Redpji Rixyjfx Ag Uou 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey "10 year anti-corrosion warranty" Landing gear: Black coated Body: Natural aluminium Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: efdaf8862775f9506d97b86a5, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front panel, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without displacement compensation 2 wheel chocks with holders Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface stone-repellent With anti-spray mud flaps only on the last axle 1 tarp rod with holder 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Rodpfx Aji Ri Ihjg Uou Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded piping for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver "TPMS" Tire pressure monitoring system according to ECE R 141, display via the towing vehicle, through EBS, no truck installation (requirement must be present in the truck, only on primary tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, "flashing side marker lights" 2 white position lights at front 2 white/red lane guidance lights at rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant material, headboard 5 mm thick, with external side walls made of 30 mm hollow-chamber profiles, cleanly welded, with bulk material-repellent upper beam profile. Internal step at headboard (not in combination with Cramaro). Shovel and broom holder on the outside of the headboard. Greenline – conical and aerodynamic body design Membrane – tailgate Tailgate pendulum mounted with double hinge and two-wing door split 1/2 to 1/2, top with swing bracket, with one grain chute per door. Tailgate with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brake, with generous clearance for best possible operability. Roll tarp stows to right side (when viewed from rear), with central locking to the left (from rear) Country of registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 42a74cba14ef2bfc0e90e52b2, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,320 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 cones with hydraulic mount for Horsch Trailer Lift. Curved front panel, hydraulic landing legs, wheel chocks with holder, special side underrun protection, foldable rear underrun protection, quarter shell mudguards before and after the axle assembly, anti-spray mudflaps only on the last axle, tarpaulin rod with mounting bracket, tow hook at the rear. Axles + Suspension SAF/BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tire wear and fuel consumption, air suspension with safety ropes, 1st axle with automatic lift axle function, including forced lowering and starting aid. Brake system 2-line pneumatic brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, no connection cable included. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle - Driving stability system Wheels and Tires 385/65 R22.5, steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, connected via EBS, not installed in truck (truck must be pre-equipped. Only for standard tires). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting, side yellow LED indicator-linked lighting "flashing side marker lights", 2 white position lights front, 2 white/red lane marker lights at rear, 2 x 7-pin non-interchangeable sockets at front, no connection cable. Rodpfx Aoi Rix Dog Ueu Hydraulics Low-pressure cylinder max. 170 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection), operation hydraulically via the truck PTO, hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Automatic hydraulic shut-off for the drop-down side wall (left side) and the trailer lift arms at approx. 20 km/h. The trailer lift arms can be separately locked allowing the trailer to be unhitched on its own. Tipping body Aluminium box body made of high-grade, wear-resistant material, bulkhead 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precisely welded, with bulk material-repelling top rail profile. Left side wall hydraulically lowerable over approx. 7800 mm, by approx. 600 mm. Note! Before lowering, the sliding roof must be opened and roof bows put into parked position. Note! Only in combination with electro-hydraulic package! External shovel and broom holder on the front bulkhead. Inside access ladder at the front bulkhead. Greenline – conical and aerodynamic body shape. Rear wall pendulum mounted, with 2 grain chutes. Rear wall additionally hydraulically liftable by approx. 1000 mm. Note! Only in combination with the electro-hydraulic package! Rear wall with rubber seal. Note: heat-resistant up to max. 170°C! Floor continuous 6 mm thick. Standing platform with steps Sliding roof on the right for stowage, with central locking on the left. Country of approval Germany With Dekra inspection and expertise (according to §13 EC - FGV) Paintwork Frame: DB 7350 Nova grey "10 years anti-perforation warranty" Body: natural aluminium Sliding roof: RAL 7035 light grey

Condition: used, container length: 10 ft, empty load weight: 2,290 kg, loading space width: 2,294 mm, loading space length: 2,389 mm, loading space height: 2,545 mm, Equipment: air conditioning, cooling unit, Dear Sir or Madam, Thank you very much for your interest! BIMICON Container Service GmbH has been offering refrigerated containers and storage containers of all kinds since 1996 – for sale or rental. Naturally, we also provide the relevant services as well as spare parts trading related to containers. If you require a custom solution, we are happy to advise you and will provide a tailored solution for your needs. _____ CONTAINER TYPE: - 10-foot High Cube, Carrier refrigeration unit, freshly painted in RAL 9010 (paintwork included) The images shown are for illustration purposes only; the actual product may differ. DELIVERY CONDITION: - PTI OK (Pre-Trip Inspection always carried out newly before delivery, checked by our specialist staff) - Fully operational / ready-to-connect - Wind and watertight - CSC certificate (certified safety standard allowing for international use of the container) - New paintwork included TECHNICAL SPECIFICATIONS: Floor type: T-bar flooring Power supply: 380/440 V, 32A, 50Hz / 60Hz with 5-pin CEE plug for mains operation Interior: stainless steel/aluminium, suitable for food storage Average power consumption: 3-8 kWh Adjustable temperature range: -25 ... +25 °C (ideal for heating and cooling) Refrigerant: R134A / R449A DIMENSIONS: External dimensions in mm: x x (L x H x W) Internal dimensions in mm: x . (L x H x W) All refrigeration units are serviced and of excellent quality and performance. ADDITIONAL OPTIONS: - Complete LED lighting kit - PVC curtain, sliding - PVC curtain, non-sliding - Cutting to desired length - Installation of aluminium flat floor - Installation of a side deep-freeze cell door - Drive-in ramp (solid steel construction) TRANSPORT SOLUTION: Do you need a transport solution? No problem! We will deliver your container with a standard truck or a truck with crane and set it up directly on site. Please contact us for a quote! All prices are stated net. Rjdpfx Aeythg Djg Uju We look forward to hearing from you! BIMICON Container Service Your specialist in Hamburg Thank you for trusting the quality of our Hamburg family business since 1996.

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Redpfewz Ufwjx Ag Ueu Type: Two chucks

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rsdpfx Agowz Ukye Ueu Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, = Additional options and accessories = - Lift Axle - Steering axle = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Rear axle 2: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! Rjdpeym Dchefx Ag Usu - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.