Used Finnigan Mat | Ctc-A200S Gcq for sale (7,861)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Dkedpozd Rmgjfx Al Asu Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1997, machine/vehicle number: 707, Ingramatic thread rolling machine RP21 RV, year 97, used Djdpfx Alewiu Afs Asku

Condition: ready for operation (used), Indramat MKD041B-144-KG0-KN permanent magnet motor, serial number MKD041-21701, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dkedpfxezz En Te Al Aeu

Condition: used, Year of construction: 2012, operating hours: 4,320 h, 2012 | Komatsu PC55MR-3 | Used Mini Excavator < 7t | 4320 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 23600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Dksdpfx Aezv Em Eol Aeu 👷‍♂️ Inspected by an independent expert 67 inspection points 42 approved ✅ 22 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Poor overall condition of the hydraulic excavator. The tracks need to be replaced. Leak on the rigid pipe under the lifting cylinder valve of the boom. Replace the holding pins of the cylinder, the stick, and the quick coupler. Oil projection at the engine level. The starter battery is out of service. The undercarriage is heavily oxidized and damaged. Significant play in the boom. The cabin door slide is damaged. Significant play in the turret. The work lights do not work. The left rear-view mirror is missing. There are 2 additional buckets included with this machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41112 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Dkedpfx Aeuglrzol Aju Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm The height of the table in the open state: 1850 mm

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel Dedpewxvqpjfx Al Ajku with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Belt width: 600 mm Electrically heated 136 kW Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: good (used), Year of construction: 2021, functionality: fully functional, Matec HV 700, Year of manufacture 2021, Heidenhain TNC 640 control system, Travel range X/Y/Z 2600/700/950 horizontal, Travel range X/Y/Z 2600/700/950 vertical, 50-position tool changer, HSK 63 tool holder, Spindle speed up to 15,000 rpm, NC swivel milling head +/- 105°, Swivel radius 250 mm, NC rotary table Ø 750 mm, IKZ (internal cooling) 20 bar, Paper band filter, Direct measuring systems, Chip conveyor, Electr. handwheel, Dynamics package, Dsdez Dgzdspfx Al Asku Software Kinematics Option, Measuring probe, Partition, S1 approx. 2000 total spindle hours, S2 approx. 25 total spindle hours.

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates Dkedsiidm Nopfx Al Aju - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, miter saw for cutting PVC window profiles. Dkjdpfez Dp Iajx Al Aeu

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg Dkjdswbd Ibspfx Al Aeu

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW Dedpjv U Ag Dofx Al Aoku n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock.

Condition: excellent (used), Indramat (24474 internal) Model 1X1X113-008 Dedpfx Alefg Uu Hs Asku Controller TDM 1.2-50-300-W1

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Dkjdoz Dtbwepfx Al Asu Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2440099152, Elumatec DG 244 Twee-kopszaagmachine - Bouwjaar 2012 - In goed werkende staat De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Dkjdsz Eqygepfx Al Aju Machine is beschikbaar begin december 2026.

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen - Barcodescanner - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar. Dodjz Eqpnspfx Al Ajku

Condition: used, Transport platform K140 1-82745500 €329 Weight per unit: 21 kg Dkedpfoztw Iijx Al Aju 4 swivel shackles €1,291 1774874610 Weight per unit: 2.35 kg The invoice can be found in the documents!

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Dodpezk N Dwjfx Al Aeku Location: 63934 Röllbach

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket Dksdpfxsz E Uhuo Al Aju * Fork * Rotating beacon ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,800 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,500 mm, total width: 1,400 mm, total length: 1,400 mm, The lime feed system is one of the main components of the desulphurization system. This particular system is installed in one of the incinerators. Dsdpjzphdgefx Al Ajku The main challenge was to ensure that the top section could be removed using a forklift with a maximum lifting height of 3 meters. Features: 1. A vibration motor is installed on the big bag mounting plate to improve lime dispensing. 2. The upper section is mounted on the hopper with a window, and the connection point is sealed. 3. A platform is provided for access to the window for opening the big bag. 4. The big bag is separated from the tray by means of a pneumatically operated valve. 5. The tray is suspended on strain gauges to monitor sorbent availability and adjust sorbent feed rate. 6. A level sensor is also included. 7. A mixer is installed in the tray. It also has a seal to prevent the sorbent from escaping the system. 8. The steel structure is designed to accommodate the installation of a screw conveyor. 9. The steel structure provides unobstructed access underneath for maintenance of the system components.

Condition: used, Industrial furniture MATRIX MAXI Dksdoz Hqtpepfx Al Asu

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 400 mm z-travel 400 mm table-size 800 x 400 mm spindle taper ISO Sk 40 spindle turning speed range 10 - 3150 U/min total power requirement 12,0 kVA Djdsy N D Idepfx Al Ajku weight of the machine ca. 2,2 t dimensions 2,0 x 1,85 x 1,95 m CNC Universal Milling Machine - Heidenhain TNC 310 with handwheel - Hydraulic tool clamp - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure

Condition: good (used), Year of construction: 2013, Double mitre saw for aluminium The saw blades can be swiveled and tilted. Control system: E355 Includes circular saw blades and extraction unit Dodpfx Aloyw R Rzj Aeku Technical data: Smallest cutting length at 90°: 375 mm Largest cutting length: 4500 mm Swivel angle inwards pneumatic: 90° - 45° (Manual up to 22.5° inwards and up to 140° outwards with digital display) Tilting angle inwards pneumatic: 90° - 45° (Intermediate angles manually adjustable with digital display and turret stop) Saw blade diameter: 550 mm Saw blade speed: 2250 rpm Power output per motor: 4 kW Dimensions: approx. 5790 / 1840 / 1985 mm Weight approx.: 2110 kg

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Dodpfx Aljzzw Eds Aoku Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: new, Rexroth Indramat MDD112D-N-015-N2L-130GA0 Permanent Magnet Motor, Serial No.: MDD112-22413, without encoder, unused, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Dsdoi D Nfbjpfx Al Aoku

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Dedpfei D Ii Iex Al Ajku