Used Fervi Sandblaster for sale (355)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Nsdjwc Rk Espfx Amysld Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Nljdpfx Aowc Afhomyod Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. Njdpfx Ameun R N Aoyeld 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: ready for operation (used), HGH 6040 DUO Sandblasting Cabinet Nljdpeyba Aysfx Amyod Manufacturer: HGH Model: 60 40 DUO External dimensions: approx. 1300mm x 720mm x 1350mm (W x D x H) Working area: 590mm x 400mm x 250mm (W x D x H) | 590mm x 400mm x 250mm (W x D x H) Weight: approx. 120 kg You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the article description are possible and remain reserved.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Nlodjzil Ivopfx Amyod Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118 Nodpfx Amey Hhcajysld

Condition: used, Year of construction: 2000, filter area: 15 m², suction capacity: 1,400 m³/h, Welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter by Plymovent. Model: M1 "The MobilONE" For welding, grinding, sandblasting and all types of dry dust. Cartridge filter insert. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Year of manufacture: 2000 Fan with a power of 1.1 kW - single-phase Efficiency 1400 m3/h Filtration area 15 m2 arm length 3 m Nedev Hzdxepfx Amyeld stock no.: 0965

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Deutz 6-cylinder engine, 240 hp. Nlodpszkrrwofx Amysd Dimensions (length/width/height): 3.45/4.65/3.35 m. Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Weight: approx. 10,000 kg. Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Condition: used, Year of construction: 2005, Sandblasting machine, blasting machine, sandblasting cabin, sandblasting device -Manufacturer: Güde, blasting system sandblasting cabin type P1 -Interior: 580/480/H295/350 mm Nljdporyak Tsfx Amyed -Air requirement: 150 l/min / pressure 6 bar -Dimensions: 690/480/H490 mm -Total weight: 38 kg

Condition: good (used), Feed container for blasting system, sandblasting system, blasting system, sandblasting cabinet, rotary basket system, wire belt, overhead conveyor and roller conveyor blasting system, free blasting system Nlodpfx Aoqcyzwjmyed -Handover: in its current condition as inspected -System: Individual components see photos -Feed container: Type Exactomat 2 G - 60 -Vacuum pump flow rate: 26.2 m³/h -Dimensions: 830/580/H1730 mm -Weight: 296 kg

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 5 h, - High-pressure cleaner PTC Torpedo Eco Compact 16/200, similar to but not a Dynajet, Oertzen, Falch, DIBO, etc. - Cold water / hot water approx. 95°C, steam 32 bar up to 140°C, and chemical-free weed control function with approx. 99°C. TECHNICAL DATA: - Torpedo Eco Compact 16/200 | 16 l/min at 200 bar | Diesel engine: Yanmar L100N 8.5 kW - Dimensions and unladen weight with 500 l water tank: 2000x1050x1100mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers Njdpfxjfdkcgs Amyold - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel, forklift adapter possible - Covers made of stainless steel - Magnetic descaling device - Incl. frame for water tank, water tank 500 l - Incl. basic accessories such as 20 m high-pressure hose, spray gun, lance and flat jet nozzle 25° - Optional accessories such as water-sandblasting kit, surface cleaner, rotary nozzle, weed control lance and trolley available upon request.

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Heavy-duty trailer Condition: Ready for use and fully functional Technical condition: good Nsdszhdn Sspfx Amysld Description: 2-axle, 3-way tipper trailer from SCHWARZMÜLLER with aluminum walls - - - Payload 13.5 tons - - - Tare weight 4.5 tons - - - Year of manufacture 1997 - - - Walls can be swung and folded open - - - Rear wall opens automatically - - - 1st wall: 80 cm aluminum, original Schwarzmüller - - - Extension walls: 60 cm aluminum - - - Undercarriage and platform base have already been sandblasted, primed, and painted - - - 2-circuit compressed air system - - - Lighting system - - - Internal platform dimensions: width 2.42 m, length 5 m - - - Tires approximately 80% - - - with Austrian registration documents.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. Njdpfxsy Sk T Ee Amyeld /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 267.0, roll diameter: 80 mm, roll width: 800 mm, roll pitch: 500 mm, total width: 7,000 mm, total height: 5,700 mm, conveying length: 7,000 mm, input voltage: 380 V, load capacity: 3,000 kg, Fully functional, last major overhaul in 2024, since then only a few operating hours. Dismantling and transport must be organized by the buyer. We can provide contact information for qualified local companies. Rack system with 305 cassettes The individual cassette, which holds the bar material, has a clear width of 400/500 mm and a clear height of 410/600 mm. The total length is 6200 mm; it can hold 3000 kg. The rack system can be divided so that it can be stored on the left and right. With the master switch joystick, you can control the two lifting and lowering speeds and the continuously variable rail travel speeds, even in diagonal movement. Two gates at the ends of the walkway. Contact strips to secure the lowering movement on two sides below the roller conveyor and on three sides below the walkway. Horizontally acting travel contact strips, 7000 mm long, to secure the travel movement in front of and behind the rack transporter. All steel parts are sandblasted, primed, and spray-painted with a synthetic resin paint RAL 3002 chimney red. Base unit complete with 4 buffer blocks and 4 ramming blocks to be bolted to the floor. 36 m of flat rails arranged in pairs ST 52 100 x 30 mm 36 m of cable track with suspension for 60 amps. Nledjziz Apspfx Amysd Additional equipment Infeed and outfeed device In addition to the 3-part roller conveyor, the guide rail is screwed horizontally. At its end, there is a reversible brake gear motor that drives the carriage, which is mounted on six bearings in the guide rail, via sprockets and a high-performance chain. The roller-bearing-mounted running rollers on the carriage absorb all the forces that occur when pulling and pushing the long material. The infeed and outfeed arm is located in the working position in the middle of the roller conveyor width, approximately 200 mm above the top edge of the roller conveyor. It can be manually pivoted out of the roller conveyor area. Swiveling platform Swiveling platforms can be provided on both sides of the rack transporter. If there is an accessible rack aisle, the rack transporter must have a distance of 500 mm to the stored long material. This makes it difficult for the person standing on the operating platform to reach and pull the long material with their hands. The swiveling platform is swung into the free space in front of the rack compartment in two seconds, locked, and ready for use. In just as little time, the platform is retracted, locked, and the electrical contact releases the rack transporter for further travel. 2 complete platforms.

Condition: refurbished (used), Year of construction: 2022, operating hours: 169 h, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Bp Pack D51 is from 2022 and has 169 operating hours. It has been completely overhauled by us, with each component being cleaned and tested for functionality. The Kärcher B40 W features a continuously variable drive, which greatly simplifies operation. The controls are also intuitive, eliminating the need for lengthy training sessions. New, maintenance-free gel batteries are installed, and these can be conveniently recharged using the integrated charger. The suction foot was sandblasted and powder-coated in our workshop and fitted with new suction strips. A new brush is included in the scope of delivery. The Kärcher B40 W Bp Pack D51 is suitable for daily cleaning of, for example, workshops, halls or shops. Technical data: Working width: 51 cm Tank volume: 40 liters fresh / dirty water Nljdpfx Ameziml Njysd Area performance: approx. 2000 m²/h

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Nlodpfxjttah Uj Amyod Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Also on offer on request new filter cartridges tailored according to the purpose of the device.

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Njdpjy Nwq Sjfx Amyjld

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 3734, Equipment: CE marking, DANTHERM Filtration dust extraction and welding fume extraction system. This vacuum extraction system is ideal for welding processes, plasma cutting, laser cutting, sandblasting, shot peening, plastic processing, and the removal of all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The set includes a complete set of automation equipment, an electrical distribution panel, connecting elements, and a silencer. Additionally, we can provide individual workstation extraction units. Fan power: 15 kW – smooth, frequency inverter-controlled operation. Njdpfx Amjzh T S Teysld Capacity: up to 9500 m3/h. Vacuum: up to 4000 Pa.

Condition: new, axle configuration: 2 axles, loading space length: 56,000 mm, loading space width: 24,300 mm, suspension: air, tire size: 275/70-22,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 4-210 PAVIC ZHTA 18 56Z 22.5" Tandem Short Timber Trailer 2-axle tandem trailer from our “OptiPa” program, designed for the transport of round timber. Vehicle description: 4 x OptiPa bolsters 8 x one-piece OptiPa aluminum supports Ride height unladen approx. 1050 mm Chassis length approx. 5600 mm (front frame to front frame) Overall length 7,800 mm Smooth steel sheet cover 3 mm Folding landing gear for increased ground clearance Towing eye ø 50 mm Axles: 2 x 10t SAF OFF Road axles Axle reinforcement for off-road configuration Retention cables for air suspension ABS, EBS, disc brakes Well balanced – good driving behavior Smartboard/TIM with axle load monitoring EBS braking system by Knorr or Wabco (at our discretion) with roll stability program Tires: 275/70 R 22.5, branded, on steel rims (aluminum rims available at extra cost) LED work lights LED side marker and position lights Painting: All steel parts are cleaned and sandblasted, then KTL or powder-coated. Painting in RAL colors as requested. Financing, leasing, or hire-purchase available. Don’t let your trailer get too old – a new trailer with a small installment saves time and money! If you have any further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further Information = Nedpfx Amjylx Agsyold Tire size: 275/70-22.5 Brakes: disc brakes Suspension: air suspension gross vehicle weight: 18,000 kg Superstructure manufacturer: PAVIC Short Timber Bolster OPTIPA SL Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, total length: 10,520 mm, total width: 2,300 mm, total height: 3,990 mm, suspension: air, tire size: 385/65-22,5, color: green, Year of construction: 2026, Equipment: ABS, - EBS Brand new at PAVIC. Available immediately! PAVIC 3-axle 55m³ tipping trailer with lift axle Technical specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2,300 mm Height: approx. 2,380 mm Technical axle group load capacity: 27,000 kg Technical kingpin load capacity: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and extra-durable I-beam main frame; manufactured from high-strength MC700 steel, welded using an automatic robotic welding process. BODY: Capacity: 55 m³ Floor plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Rear door: HARDOX450, thickness 4 mm A resonator/vibrator is installed under the structure at the front to help loosen stuck bulk materials when tipped (see pictures). TIPPER BODY: Tipping body with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more. HYDRAULIC CYLINDER (LIFT): Heavy-duty hydraulic cylinder (brand HYVA – C), single-circuit AXLES: 3 × 9-ton SAF CD (BI9–22S) axles with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TYRES: 6 × 385/65R22.5 (premium brand tires) WHEELS: 6 × steel rims BRAKE SYSTEM: WABCO braking system 2-line brake system according to EU regulations EBS 2S/2M Pneumatic parking brake 1 × yellow air coupling 1 × red air coupling 1 × brake pressure valve TPMS (tire pressure monitoring system) KINGPIN: 1 position, 2” (brand JOST or SAF) LANDING LEGS: Mechanical aluminum landing legs. Each leg is operated via its own locking device (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 × 7-pin and 1 × 15-pin ISO connectors EEC-compliant lighting as standard: SAE tail lights Side marker lights Brake warning lights Rear signal lights Lighting ASPÖCK (EUROPOINT III): 2 combination tail/brake lights (red) 2 combination indicator lights (orange) 1 license plate light ACCESSORIES: 6 × mudguards Njdey N Tngopfx Amyold 2 × mud flaps 2 × reflective tapes and reflective plates, rear and side 1 × rear underrun protection 2 × wheel chocks with holders 1 × side aluminum protection 1 × toolbox 1 × working platform (painted and bolted) 1 × rollable tarpaulin (including mechanical support bar) PAINTWORK: Before painting, surfaces are smoothed and then cleaned. Then: sandblasting according to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic topcoat RAL colors: Chassis (KTL): black Body: green (similar to RAL 6016 yellow green) For further inquiries, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. General information Year of manufacture: 2026 Axle configuration Tire size: 385/65-22.5 Brakes: disc brakes Suspension: air suspension...

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. Njdpszd Twbefx Amyold The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: used, Manufacturer: SatrindTech Srl Nlsdjwvk A Ujpfx Amysd Type: F 810 Mach.No.: 65489 Shredding Chamber size : 850 x 590mm. Distance between shaft centres: 215mm. With 15 kW Electrical motor. Crushers will be overhauled, sandblasted and painted.

Condition: like new (used), “Parker 16″ x 5″ (400 x 130mm)” for Sale Manufacturer: Parker Inlet size: 16″ x 5″ (400 x 130mm) Electrical Motor: Included Nledpfx Asgw Drxemyed Can be sold with or without frame. Crusher is overhauled, sandblasted and painted. 6 Pcs. (3 sets) new jaws on stock.

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities Nlodoy Ai Ehspfx Amyjd • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Descriptive Document of the Machinery “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine name: Printer Slotter - Model: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 ° Slotter overhauled to as-new condition ° Partial printing unit overhaul (new anilox cylinder and rubber roller, new compensator, new bearings, new lubrication pump, overhauled ink feed pump) ° Partial feeder overhaul (new feeder wheels, new lubrication pump, main motor completely overhauled by CEAR, new CAM bearing) ° Static unit overhauled to as-new condition Complete sandblasting and repainting of all machine assemblies. Nlsdeyifdvopfx Amyed - Year of Partial Electrical Overhaul: 2025 Includes replacement of: sensors / push button panels / onboard cabling / solenoid valves / electrical junction boxes for machine groups. 2. Technical Specifications: - Dimensions: Length 4800mm; Cylinder Circumference 1860mm - Speed: Maximum rotation 5,500 cycles/hour under optimal conditions - Minimum shaft center distance: 450mm - Sound pressure level (feeding area): 85dB (A) - Sound pressure level (delivery area): 82dB (A) - Electrical characteristics: Supply 400Vac Three-phase 3P+PE Nominal Power: 70KW Power Consumption: 57KW Nominal Current: 102A Operating Current: 82A - Production speed: approximately 5,000 boxes/hour in sync mode, approximately 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table Group with automatic positioning of side guides and bundle support gate. - Printing Unit Group with automatic print presetting - Slotter Unit Group with extending and automatic presetting (knife heads) and carton height adjustment - Static Unit Group 4. Safety: - The machine is fitted with protective guards on all moving parts, equipped with sensors to detect guard opening. - Each machine group is provided with an emergency stop mushroom button and a rope pull switch to instantly halt group movements. 5. Electrical Equipment: - Main electrical cabinet housing all control and power distribution components - Operator control desk/console complete with touch screen panel 6. Components not included, for possible installation: - Cable tray and optional accessories - Command and power cables between cabinet/console/machine assemblies - Network bus cables -Price Negotiable Note: Possibility to purchase a Die-Cutter and Stacker (year 2008, requires overhaul)